misc/120717: boot problem when recognizing ata1
Rodrigo Readi
scire at web.de
Fri Feb 15 15:10:01 UTC 2008
>Number: 120717
>Category: misc
>Synopsis: boot problem when recognizing ata1
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri Feb 15 15:10:01 UTC 2008
>Closed-Date:
>Last-Modified:
>Originator: Rodrigo Readi
>Release: 7.0 RC 1
>Organization:
No
>Environment:
>Description:
Here is my verbose dmesg log. The repetition of 309 times of the line:
"ata1: stat1=0x01 err=0x00 lsb=0x00 msb=0x00"
seems to be a bug. It delays the boot process. When I start X with
xinit, the following appears at the end of the log:
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Perhaps also a bug? By the way, in the packages in the CDs are a
lot of scripting languages, but I miss tcl/tk (BSD licence!).
>How-To-Repeat:
>Fix:
Patch attached with submission follows:
Dear Sirs!
Here is my verbose dmesg log. The repetition of 309 times of the line:
"ata1: stat1=0x01 err=0x00 lsb=0x00 msb=0x00"
seems to be a bug. It delays the boot process. When I start X with
xinit, the following appears at the end of the log:
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Perhaps also a bug? By the way, in the packages in the CDs are a
lot of scripting languages, but I miss tcl/tk (BSD licence!).
Best regards
Rodrigo Readi
(s c i r e a t w e b d o t d e)
---------
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RC2 #0: Fri Feb 8 00:09:57 UTC 2008
root at logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0d0c000.
Calibrating clock(s) ... i8254 clock: 1193306 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 298731298 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (298.73-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x634 Stepping = 4
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
Instruction TLB: 4 KB pages, 4-way set associative, 32 entries
Instruction TLB: 4 MB pages, fully associative, 2 entries
Data TLB: 4 KB pages, 4-way set associative, 64 entries
2nd-level cache: 512 KB, 4-way set associative, 32 byte line size
1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size
Data TLB: 4 MB Pages, 4-way set associative, 8 entries
1st-level data cache: 16 KB, 4-way set associative, 32 byte line size
real memory = 100663296 (96 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001028000 - 0x0000000005e0efff, 81686528 bytes (19943 pages)
avail memory = 84484096 (80 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f0280
bios32: Entry = 0xf0210 (c00f0210) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0200+0x0
pnpbios: Found PnP BIOS data at 0xc00f5c90
pnpbios: Entry = fa000:0 Rev = 1.0
Other BIOS signatures found:
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Feb 8 2008 00:09:32)
npx0: INT 16 interface
cpu0 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71808086)
pcibios: BIOS version 2.10
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x60 255 N 6 3 4 5 6 7 9 10 11 12 14 15
0x61 255 N 6 3 4 5 6 7 9 10 11 12 14 15
0x62 255 N 6 3 4 5 6 7 9 10 11 12 14 15
0x63 255 N 7 3 4 5 6 7 9 10 11 12 14 15
0xff 255 N 1 15
$PIR: Found matching pin for 0.7.INTD at func 2: 5
$PIR: Found matching pin for 0.15.INTA at func 0: 11
$PIR: Found matching pin for 0.16.INTA at func 0: 5
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x60 255 N 6 3 4 5 6 7 9 10 11 12 14 15
0x61 255 N 6 3 4 5 6 7 9 10 11 12 14 15
0x62 11 Y 6 3 4 5 6 7 9 10 11 12 14 15
0x63 5 Y 7 3 4 5 6 7 9 10 11 12 14 15
0xff 15 N 1 15
$PIR: IRQs used by BIOS: 5 11 15
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 7 0 0 0 0 0 6 0 0 0 1 ]
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x7180, revid=0x03
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 26, enabled
found-> vendor=0x8086, dev=0x7181, revid=0x03
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x01
domain=0, bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7111, revid=0x01
domain=0, bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type I/O Port, range 32, base 0xb030, size 4, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
domain=0, bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
map[20]: type I/O Port, range 32, base 0xb000, size 5, enabled
$PIR: 0:7 INTD routed to irq 5
found-> vendor=0x8086, dev=0x7113, revid=0x01
domain=0, bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[90]: type I/O Port, range 32, base 0x800, size 4, enabled
found-> vendor=0x9004, dev=0x8178, revid=0x00
domain=0, bus=0, slot=15, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=11
map[10]: type I/O Port, range 32, base 0x9400, size 8, enabled
map[14]: type Memory, range 32, base 0x80101000, size 12, enabled
$PIR: 0:15 INTA routed to irq 11
found-> vendor=0x1317, dev=0x0985, revid=0x11
domain=0, bus=0, slot=16, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0xff (63750 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0x9800, size 8, enabled
map[14]: type Memory, range 32, base 0x80102000, size 10, enabled
$PIR: 0:16 INTA routed to irq 5
agp0: <Intel 82443LX (440 LX) host to PCI bridge> on hostb0
hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 64M
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xa000-0xafff
pcib1: memory decode 0x80200000-0x802fffff
pcib1: prefetched decode 0x80300000-0x820fffff
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x4742, revid=0x5c
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
map[10]: type Prefetchable Memory, range 32, base 0x81000000, size 24, enabled
pcib1: requested memory range 0x81000000-0x81ffffff: good
map[14]: type I/O Port, range 32, base 0xa000, size 8, enabled
pcib1: requested I/O range 0xa000-0xa0ff: in range
map[18]: type Memory, range 32, base 0x80200000, size 12, enabled
pcib1: requested memory range 0x80200000-0x80200fff: good
vgapci0: <VGA-compatible display> port 0xa000-0xa0ff
mem 0x81000000-0x81ffffff,0x80200000-0x80200fff at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller>
port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xb030-0xb03f at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb030
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x01 err=0x00 lsb=0x00 msb=0x00
ata1: stat1=0x01 err=0x00 lsb=0x00 msb=0x00
ata1: stat1=0x01 err=0x00 lsb=0x00 msb=0x00
..
[309 times: ata1: stat1=0x01 err=0x00 lsb=0x00 msb=0x00
..
ata1: stat1=0x01 err=0x00 lsb=0x00 msb=0x00
ata1: stat1=0x01 err=0x00 lsb=0x00 msb=0x00
ata1: stat1=0x01 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=81 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
ata1: [ITHREAD]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller>
port 0xb000-0xb01f irq 5 at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb000
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
piix0: <PIIX Timecounter> port 0x800-0x80f at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x9400-0x94ff mem 0x80101000-0x80101fff irq 11 at device 15.0 on pci0
ahc0: Defaulting to MEMIO off
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x9400
ahc0: Reading SEEPROM...done.
ahc0: Low byte termination Enabled
ahc0: Downloading Sequencer Program... 439 instructions downloaded
ahc0: Features 0x10000, Bugs 0x25, Flags 0x20401540
ahc0: [MPSAFE]
ahc0: [ITHREAD]
aic7880: Single Channel A, SCSI Id=7, 16/253 SCBs
dc0: <ADMtek AN985 10/100BaseTX> port 0x9800-0x98ff
mem 0x80102000-0x801023ff irq 5 at device 16.0 on pci0
dc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x9800
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: OUI 0x000749, model 0x0001, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
dc0: Ethernet address: 00:10:a7:17:d8:c2
dc0: [MPSAFE]
dc0: [ITHREAD]
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
CSC0000: start dependent (0)
CSC0000: adding dma mask 0x2
CSC0000: adding dma mask 0x9
CSC0000: adding irq mask 0x20
CSC0000: adding io range 0x534-0x537, size=0x4, align=0x4
CSC0000: adding io range 0x388-0x38f, size=0x8, align=0x8
CSC0000: adding io range 0x220-0x22f, size=0x10, align=0x20
CSC0000: start dependent (1)
CSC0000: adding dma mask 0xa
CSC0000: adding dma mask 0xb
CSC0000: adding irq mask 0xea8
CSC0000: adding io range 0x534-0xfff, size=0x4, align=0x4
CSC0000: adding io range 0x388-0x38f, size=0x8, align=0x8
CSC0000: adding io range 0x220-0x26f, size=0x10, align=0x20
CSC0000: start dependent (2)
CSC0000: adding dma mask 0xb
CSC0000: adding irq mask 0xea8
CSC0000: adding io range 0x534-0xfff, size=0x4, align=0x4
CSC0000: adding io range 0x388-0x3ff, size=0x8, align=0x8
CSC0000: adding io range 0x220-0x30f, size=0x10, align=0x20
CSC0000: end dependent
CSC0001: start dependent (0)
CSC0001: adding io range 0x200-0x207, size=0x8, align=0x8
CSC0001: start dependent (1)
CSC0001: adding io range 0x208-0x20f, size=0x8, align=0x8
CSC0001: end dependent
CSC0010: adding io range 0x120-0xfff, size=0x8, align=0x8
CSC0003: start dependent (0)
CSC0003: adding irq mask 0x200
CSC0003: adding io range 0x330-0x331, size=0x2, align=0x8
CSC0003: start dependent (1)
CSC0003: adding irq mask 0xe08
CSC0003: adding io range 0x330-0x361, size=0x2, align=0x8
CSC0003: start dependent (2)
CSC0003: adding io range 0x330-0x3e1, size=0x2, align=0x8
CSC0003: end dependent
PNP Identify complete
pnpbios: 14 devices, largest 126 bytes
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
pnpbios: handle 0 device ID PNP0a03 (030ad041)
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: adding dma mask 0x10
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: adding irq mask 0x1
pnpbios: handle 3 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: adding irq mask 0x100
pnpbios: handle 4 device ID PNP0b00 (000bd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: adding irq mask 0x2000
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0c01: adding memory range 0-0x9ffff, size=0xa0000, align=0
PNP0c01: adding memory range 0xe0000-0xebfff, size=0xc000, align=0
PNP0c01: adding memory range 0xf0000-0xfffff, size=0x10000, align=0
PNP0c01: adding memory32 range 0xfffe0000-0xffffffff, size=0x20000, align=0
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c02: adding memory32 range 0x100000-0xffffff, size=0xf00000, align=0
PNP0c02: adding memory32 range 0x1000000-0x5ffffff, size=0x5000000, align=0
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0
PNP0c02: adding io range 0x440-0x47f, size=0x40, align=0
PNP0c02: adding io range 0x800-0x80f, size=0x10, align=0
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: adding irq mask 0x2
pnpbios: handle 9 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 10 device ID PNP0f13 (130fd041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0
pnpbios: handle 11 device ID PNP0400 (0004d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
pnpbios: handle 13 device ID PNP0501 (0105d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 14 device ID PNP0700 (0007d041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff
pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ic_type 90 part_id 80
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 80
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [MPSAFE]
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: [FILTER]
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0800> failed to probe at port 0x61 pnpid PNP0800 on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9ffff pnpid PNP0c01 on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> at iomem 0x100000-0xffffff pnpid PNP0c02 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 pnpid PNP0303 on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 pnpid PNP0f13 on isa0
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0400> at port 0x378-0x37f pnpid PNP0400 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff pnpid PNP0501 on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 pnpid PNP0700 on isa0
unknown: <WSS/SB> failed to probe at port 0x534-0x537,0x388-0x38f,0x220-0x22f
irq 9 drq 1,0 pnpid CSC8037 on isa0
unknown: <GAME> failed to probe at port 0x200-0x207 pnpid CSC8037 on isa0
unknown: <CTRL> failed to probe at port 0x120-0x127 pnpid CSC8037 on isa0
unknown: <MPU> failed to probe at port 0x330-0x331 irq 10 pnpid CSC8037 on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 298731298 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
ad0: setting PIO4 on PIIX4 chip
ad0: setting UDMA33 on PIIX4 chip
ad0: 19546MB <FUJITSU MPF3204AT 0031> at ata0-master UDMA33
ad0: 40031712 sectors [39714C/16H/63S] 16 sectors/interrupt 1 depth queue
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd0: setting PIO4 on PIIX4 chip
acd0: <RICOH CD-R/RW MP7063A/1.90> CDRW drive at ata1 as master
acd0: read 5512KB/s (5512KB/s) write 1034KB/s (1034KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes: CDR, CDRW, test write
acd0: Audio: play, 15 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
GEOM: new disk ad0
GEOM_LABEL: Label for provider ad0s1 is msdosfs/APTIVA.
GEOM_LABEL: Label for provider ad0s4 is msdosfs/CYLINDRICAL.
ahc0: Selection Timeout on A:0. 0 SCBs aborted
(ahc0:A:1:0): Received SDTR period c, offset 1e
Filtered to period 0, offset 0
(ahc0:A:1:0): Target Initiated SDTR
(ahc0:A:1:0): Sending SDTR period 45, offset 0
ahc0: Selection Timeout on A:2. 0 SCBs aborted
ahc0: Selection Timeout on A:5. 0 SCBs aborted
ahc0: Selection Timeout on A:6. 0 SCBs aborted
ahc0: Selection Timeout on A:3. 0 SCBs aborted
ahc0: Selection Timeout on A:4. 0 SCBs aborted
(probe1:ahc0:0:1:0): Retrying Command
(probe1:ahc0:0:1:0): Down reving Protocol Version from 4 to 3?
(ahc0:A:1:0): Sending SDTR period 19, offset f
(ahc0:A:1:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
ahc0: target 1 synchronous at 10.0MHz, offset = 0xf
GEOM: new disk da0da0 at ahc0 bus 0 target 1 lun 0
da0: <IBM DGHS09Y 03E0> Fixed Direct Access SCSI-3 device
da0: Serial Number 682AC648GA
da0: 10.000MB/s transfers (10.000MHz, offset 15)
da0: Command Queueing Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
pass0 at ahc0 bus 0 target 1 lun 0
pass0: <IBM DGHS09Y 03E0> Fixed Direct Access SCSI-3 device
pass0: Serial Number 682AC648GA
pass0: 10.000MB/s transfers (10.000MHz, offset 15)
pass0: Command Queueing Enabled
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad0s3a
start_init: trying /sbin/init
Linux ELF exec handler installed
splash: image decoder found: blank_saver
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list