kern/120296: [sata] Unstable SATA on MB with Nvidia MCP 570 SLI chipset.

Wed Feb 6 16:20:02 UTC 2008

The following reply was made to PR kern/120296; it has been noted by GNATS.

From: =?ISO-8859-1?Q?Morten_Str=E5rup?= <morten at lightworkings.dk>
To: bug-followup at FreeBSD.org, morten at lightworkings.dk
Cc:  
Subject: Re: kern/120296: [sata] Unstable SATA on MB with Nvidia MCP 570 SLI
 chipset.
Date: Wed, 06 Feb 2008 17:18:30 +0100

 Here is my dmesg, the kernel is one compiled yesterday from the at that 
 point latest RELENG_7 sources.

 I'm using a Sil3114 sata controller for the disks at the moment, so that 
 the machine is usable.

 Copyright (c) 1992-2008 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 7.0-PRERELEASE #1: Wed Feb  6 00:09:43 CET 2008
     root at nas.lightworkings:/usr/obj/usr/src/sys/GENERIC
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: AMD Athlon(tm) X2 Dual Core Processor BE-2400 (2300.02-MHz K8-class 
 CPU)
   Origin = "AuthenticAMD"  Id = 0x60fb2  Stepping = 2

 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
   Features2=0x2001<SSE3,CX16>
   AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
   AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
   Cores per package: 2
 usable memory = 4282007552 (4083 MB)
 avail memory  = 4118200320 (3927 MB)
 ACPI APIC Table: <MSIISM OEMAPIC >
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
 ioapic0 <Version 1.1> irqs 0-23 on motherboard
 kbd1 at kbdmux0
 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
 hptrr: HPT RocketRAID controller driver v1.1 (Feb  6 2008 00:09:35)
 acpi0: <MSIISM OEMRSDT> on motherboard
 acpi0: [ITHREAD]
 acpi0: Power Button (fixed)
 acpi0: reservation of fec00000, 1000 (3) failed
 acpi0: reservation of fee00000, 1000 (3) failed
 acpi0: reservation of 0, a0000 (3) failed
 acpi0: reservation of 100000, cff00000 (3) failed
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on 
 acpi0
 Timecounter "HPET" frequency 25000000 Hz quality 900
 cpu0: <ACPI CPU> on acpi0
 powernow0: <PowerNow! K8> on cpu0
 cpu1: <ACPI CPU> on acpi0
 powernow1: <PowerNow! K8> on cpu1
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pci0: <ACPI PCI bus> on pcib0
 pci0: <memory, RAM> at device 0.0 (no driver attached)
 isab0: <PCI-ISA bridge> port 0x2f00-0x2f7f at device 1.0 on pci0
 isa0: <ISA bus> on isab0
 pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
 ohci0: <OHCI (generic) USB controller> mem 0xfeafb000-0xfeafbfff irq 22 
 at device 2.0 on pci0
 ohci0: [GIANT-LOCKED]
 ohci0: [ITHREAD]
 usb0: OHCI version 1.0, legacy support
 usb0: <OHCI (generic) USB controller> on ohci0
 usb0: USB revision 1.0
 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 uhub0: 10 ports with 10 removable, self powered
 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeafac00-0xfeafacff irq 
 23 at device 2.1 on pci0
 ehci0: [GIANT-LOCKED]
 ehci0: [ITHREAD]
 usb1: EHCI version 1.0
 usb1: companion controller, 10 ports each: usb0
 usb1: <EHCI (generic) USB 2.0 controller> on ehci0
 usb1: USB revision 2.0
 uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
 uhub1: 10 ports with 10 removable, self powered
 atapci0: <nVidia nForce MCP55 UDMA133 controller> port 
 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 4.0 on pci0
 ata0: <ATA channel 0> on atapci0
 ata0: [ITHREAD]
 ata1: <ATA channel 1> on atapci0
 ata1: [ITHREAD]
 atapci1: <nVidia nForce MCP55 SATA300 controller> port 
 0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f 
 mem 0xfeaf9000-0xfeaf9fff irq 21 at device 5.0 on pci0
 atapci1: [ITHREAD]
 ata2: <ATA channel 0> on atapci1
 ata2: [ITHREAD]
 ata3: <ATA channel 1> on atapci1
 ata3: [ITHREAD]
 atapci2: <nVidia nForce MCP55 SATA300 controller> port 
 0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f 
 mem 0xfeaf8000-0xfeaf8fff irq 22 at device 5.1 on pci0
 atapci2: [ITHREAD]
 ata4: <ATA channel 0> on atapci2
 ata4: [ITHREAD]
 ata5: <ATA channel 1> on atapci2
 ata5: [ITHREAD]
 atapci3: <nVidia nForce MCP55 SATA300 controller> port 
 0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f 
 mem 0xfeaf7000-0xfeaf7fff irq 23 at device 5.2 on pci0
 atapci3: [ITHREAD]
 ata6: <ATA channel 0> on atapci3
 ata6: [ITHREAD]
 ata7: <ATA channel 1> on atapci3
 ata7: [ITHREAD]
 pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
 pci1: <ACPI PCI bus> on pcib1
 atapci4: <SiI SiI 3114 SATA150 controller> port 
 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f 
 mem 0xfebffc00-0xfebfffff irq 16 at device 0.0 on pci1
 atapci4: [ITHREAD]
 ata8: <ATA channel 0> on atapci4
 ata8: [ITHREAD]
 ata9: <ATA channel 1> on atapci4
 ata9: [ITHREAD]
 ata10: <ATA channel 2> on atapci4
 ata10: [ITHREAD]
 ata11: <ATA channel 3> on atapci4
 ata11: [ITHREAD]
 vgapci0: <VGA-compatible display> mem 
 0xfebf8000-0xfebfbfff,0xfd800000-0xfdffffff irq 17 at device 1.0 on pci1
 fwohci0: <VIA Fire II (VT6306)> port 0xe080-0xe0ff mem 
 0xfebff000-0xfebff7ff irq 18 at device 4.0 on pci1
 fwohci0: [FILTER]
 fwohci0: OHCI version 1.10 (ROM=1)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 00:10:dc:00:01:07:3b:4e
 fwohci0: Phy 1394a available S400, 2 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 firewire0: <IEEE1394(FireWire) bus> on fwohci0
 dcons_crom0: <dcons configuration ROM> on firewire0
 dcons_crom0: bus_addr 0x13dc000
 fwe0: <Ethernet over FireWire> on firewire0
 if_fwe0: Fake Ethernet address: 02:10:dc:07:3b:4e
 fwe0: Ethernet address: 02:10:dc:07:3b:4e
 fwip0: <IP over FireWire> on firewire0
 fwip0: Firewire address: 00:10:dc:00:01:07:3b:4e @ 0xfffe00000000, S400, 
 maxrec 2048
 sbp0: <SBP-2/SCSI over FireWire> on firewire0
 fwohci0: Initiate bus reset
 fwohci0: BUS reset
 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
 pci0: <multimedia> at device 6.1 (no driver attached)
 nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem 
 0xfeaf6000-0xfeaf6fff,0xfeafa800-0xfeafa8ff,0xfeafa400-0xfeafa40f irq 20 
 at device 8.0 on pci0
 miibus0: <MII bus> on nfe0
 ciphy0: <Vitesse VSC8601 10/100/1000TX PHY> PHY 0 on miibus0
 ciphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
 1000baseT-FDX, auto
 nfe0: Ethernet address: 00:19:db:cf:4c:c2
 nfe0: [FILTER]
 nfe0: [FILTER]
 nfe0: [FILTER]
 nfe0: [FILTER]
 nfe0: [FILTER]
 nfe0: [FILTER]
 nfe0: [FILTER]
 nfe0: [FILTER]
 nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xb080-0xb087 mem 
 0xfeaf5000-0xfeaf5fff,0xfeafa000-0xfeafa0ff,0xfeaf4c00-0xfeaf4c0f irq 20 
 at device 9.0 on pci0
 miibus1: <MII bus> on nfe1
 ciphy1: <Vitesse VSC8601 10/100/1000TX PHY> PHY 1 on miibus1
 ciphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
 1000baseT-FDX, auto
 nfe1: Ethernet address: 00:19:db:cf:65:95
 nfe1: [FILTER]
 nfe1: [FILTER]
 nfe1: [FILTER]
 nfe1: [FILTER]
 nfe1: [FILTER]
 nfe1: [FILTER]
 nfe1: [FILTER]
 nfe1: [FILTER]
 pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
 pci2: <ACPI PCI bus> on pcib2
 pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
 pci3: <ACPI PCI bus> on pcib3
 pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
 pci4: <ACPI PCI bus> on pcib4
 pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0
 pci5: <ACPI PCI bus> on pcib5
 pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0
 pci6: <ACPI PCI bus> on pcib6
 pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0
 pci7: <ACPI PCI bus> on pcib7
 acpi_button0: <Power Button> on acpi0
 sio0: configured irq 4 not in bitmap of probed irqs 0
 sio0: port may not be enabled
 sio0: configured irq 4 not in bitmap of probed irqs 0
 sio0: port may not be enabled
 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
 acpi0
 sio0: type 16550A
 sio0: [FILTER]
 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 kbd0 at atkbd0
 atkbd0: [GIANT-LOCKED]
 atkbd0: [ITHREAD]
 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 psm0: [GIANT-LOCKED]
 psm0: [ITHREAD]
 psm0: model IntelliMouse, device ID 3
 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xccfff on isa0
 ppc0: cannot reserve I/O port range
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 sio1: configured irq 3 not in bitmap of probed irqs 0
 sio1: port may not be enabled
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 Timecounters tick every 1.000 msec
 hptrr: no controller detected.firewire0: 1 nodes, maxhop <= 0, cable IRM 
 = 0 (me)
 firewire0: bus manager 0 (me)

 ad16: 114473MB <FUJITSU MHW2120BH 00810013> at ata8-master SATA150
 ad18: 476940MB <WDC WD5000AAKS-00YGA0 12.01C02> at ata9-master SATA150
 ad20: 476940MB <WDC WD5000AAKS-00YGA0 12.01C02> at ata10-master SATA150
 ad22: 476940MB <WDC WD5000AAKS-00YGA0 12.01C02> at ata11-master SATA150
 SMP: AP CPU #1 Launched!
 Trying to mount root from ufs:/dev/ad16s1a
 WARNING: ZFS is considered to be an experimental feature in FreeBSD.
 ZFS filesystem version 6
 ZFS storage pool version 6
 nfe0: link state changed to UP