misc/116939: PCI-to-PCI misconfigured for bus three and can not see bus three devices

Don L. Belcher don at siad.net
Thu Oct 4 15:30:09 PDT 2007


>Number:         116939
>Category:       misc
>Synopsis:       PCI-to-PCI misconfigured for bus three and can not see bus three devices
>Confidential:   no
>Severity:       critical
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Thu Oct 04 22:30:08 GMT 2007
>Closed-Date:
>Last-Modified:
>Originator:     Don L. Belcher
>Release:        7.0 current
>Organization:
SIAD, Inc.
>Environment:
FreeBSD satellite.siad.net 7.0-CURRENT FreeBSD 7.0-CURRENT #17: Sun Sep 30 07:53:02 PD
T 2007     don at satellite.siad.net:/usr/obj/usr/home/don/FreeBSD7/src/sys/DEBUG  i386
>Description:
PCI-to-PCI bridge for bus three seems to be misconfigured so devices on bus 3 are not
found.
This did work back in march 2007.

IS:
pcib3:   no prefetched decode
SHOUD BE:
pcib3:   prefetched decode 0xfff00000-0xfffff

Maybe caused by following errors?
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7f00000 (3) failed


Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #16: Mon Sep 17 08:23:28 PDT 2007
    don at satellite.siad.net:/usr/obj/usr/home/don/FreeBSD7/src/sys/DEBUG
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08a5000.
Preloaded elf module "/boot/kernel/if_sl.ko" at 0xc08a5180.
Preloaded elf module "/boot/kernel/if_fxp.ko" at 0xc08a522c.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc08a52d8.
Preloaded acpi_dsdt "/boot/DSDT.aml" at 0xc08a5384.
P
reloaded elf module "/boot/kernel/acpi.ko" at 0xc08a53c8.
Calibrating clock(s) ... i8254 clock: 1193161 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 546512822 Hz
CPU: Intel Pentium III (546.51-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>

Instruction TLB: 4 KB pages, 4-way set associative, 32 entries
Instruction TLB: 4 MB pages, fully associative, 2 entries
Data TLB: 4 KB pages, 4-way set associative, 64 entries
2nd-level cache: 256 KB, 8-way set associative, 32 byte line size
1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size
Data TLB: 4 MB Pages, 4-way set associative, 8 entries
1st-level data cache: 16 KB, 4-way set associative, 32 byte line size
real memory  = 133627904 (127 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x0000000007cf0fff, 118263808 bytes (28873 pages)
avail memory = 120991744 (115 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6b60
bios32: Entry = 0xfd88d (c00fd88d)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd7d0+0x2b6
pnpbios: Found PnP BIOS data at 0xc00f6b90
pnpbios: Entry = f0000:ab11  Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
io: <I/O>
nfslock: pseudo-device
ACPI: RSDP @ 0x0xf6b40/0x0014 (v  0 PTLTD )
ACPI: RSDT @ 0x0x7f7767a/0x002C (v  1 GATEWA SOLO9500 0x20011114  LTP 0x00000000)
ACPI: FACP @ 0x0x7f7fb64/0x0074 (v  1 GATEWA SOLO9500 0x20011114 LOHR 0x00000001)
ACPI: DSDT @ 0x0x7f776a6/0x84BE (v  1 GATEWA SOLO9500 0x20011114 MSFT 0x0100000B)
ACPI: FACS @ 0x0x7f7ffc0/0x0040
ACPI: BOOT @ 0x0x7f7fbd8/0x0028 (v  1 GATEWA SOLO9500 0x20011114  LTP 0x00000001)
npx0: INT 16 interface
acpi0: <GATEWA SOLO9500> on motherboard
ACPI: Table DSDT replaced by host OS
ACPI: DSDT @ 0x0/0x7831 (v  1 GATEWA SOLO9500 0x20011114 INTL 0x20041119)
acpi0: [MPSAFE]
acpi0: [ITHREAD]
pci_open(1):    mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=11308086)
pcibios: BIOS version 2.10
AcpiOsDerivePciId: \\_SB_.PCI0.HUB_.DCK0.PCI_ -> bus 2 dev 12 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc3d46000 pa 0x1000
atpic: Programming IRQ9 as level/low
AcpiOsDerivePciId: \\_SB_.PCI0.REGS -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.IDE_.PCI_ -> bus 0 dev 31 func 1
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.REGS -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PIRX -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PIRY -> bus 0 dev 31 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7f00000 (3) failed
ACPI timer: 1/1 1/0 1/0 1/0 1/0 1/1 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  10
  Validation          0   10   N     0  10
  After Disable       0  255   N     0  10
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  10
  Validation          0   10   N     0  10
  After Disable       0  255   N     0  10
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  5
  Validation          0    5   N     0  5
  After Disable       0  255   N     0  5
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  5
  Validation          0    5   N     0  5
  After Disable       0  255   N     0  5
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  10
  Validation          0  255   N     0  10
  After Disable       0  255   N     0  10
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  10
  Validation          0  255   N     0  10
  After Disable       0  255   N     0  10
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  10
  Validation          0  255   N     0  10
  After Disable       0  255   N     0  10
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  5
  Validation          0    5   N     0  5
  After Disable       0  255   N     0  5
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: failed to attach P_CNT
device_attach: acpi_throttle0 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.31.INTB at func 3: 10
ACPI: Found matching pin for 0.31.INTC at func 4: 5
ACPI: Found matching pin for 0.31.INTD at func 2: 5
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x1130, revid=0x11
        bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[10]: type Prefetchable Memory, range 32, base 0xf4000000, size 26, enabled
found-> vendor=0x8086, dev=0x1131, revid=0x11
        bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0007, statreg=0x0020, cachelnsz=0 (dwords)
        lattimer=0x30 (1440 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2448, revid=0x03
        bus=0, slot=30, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0007, statreg=0x0080, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x244c, revid=0x03
        bus=0, slot=31, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x244a, revid=0x03
        bus=0, slot=31, func=1
        class=01-01-80, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[20]: type I/O Port, range 32, base 0x1800, size  4, enabled
found-> vendor=0x8086, dev=0x2442, revid=0x03
        bus=0, slot=31, func=2
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=5
        map[20]: type I/O Port, range 32, base 0x1820, size  5, enabled
pcib0: matched entry for 0.31.INTD (src \\_SB_.PCI0.LPC0.LNKD:0)
pcib0: slot 31 INTD routed to irq 5 via \\_SB_.PCI0.LPC0.LNKD
found-> vendor=0x8086, dev=0x2443, revid=0x03
        bus=0, slot=31, func=3
        class=0c-05-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=10
        map[20]: type I/O Port, range 32, base 0x1810, size  4, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPC0.LNKB:0)
pcib0: slot 31 INTB routed to irq 10 via \\_SB_.PCI0.LPC0.LNKB
found-> vendor=0x8086, dev=0x2444, revid=0x03
        bus=0, slot=31, func=4
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=5
        map[20]: type I/O Port, range 32, base 0x1840, size  5, enabled
pcib0: matched entry for 0.31.INTC (src \\_SB_.PCI0.LPC0.LNKH:0)
pcib0: slot 31 INTC routed to irq 5 via \\_SB_.PCI0.LPC0.LNKH
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x2000-0x2fff
pcib1:   memory decode     0xf0000000-0xf00fffff
pcib1:   prefetched decode 0xf8000000-0xfbffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x4d46, revid=0x00
        bus=1, slot=0, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0083, statreg=0x02b0, cachelnsz=8 (dwords)
        lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Prefetchable Memory, range 32, base 0xf8000000, size 26, enabled
pcib1: requested memory range 0xf8000000-0xfbffffff: good
        map[14]: type I/O Port, range 32, base 0x2000, size  8, enabled
pcib1: requested I/O range 0x2000-0x20ff: in range
        map[18]: type Memory, range 32, base 0xf0000000, size 14, enabled
pcib1: requested memory range 0xf0000000-0xf0003fff: good
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LPC0.LNKB:0)
pcib0: slot 1 INTA routed to irq 10 via \\_SB_.PCI0.LPC0.LNKB
pcib1: slot 0 INTA is routed to irq 10
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xf8000000-0xfbffffff,0xf0000000-0xf0003fff irq 10 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   3
pcib2:   I/O decode        0x3000-0x5fff
pcib2:   memory decode     0xf0100000-0xf07fffff
pcib2:   no prefetched decode
pcib2:   Subtractively decoded bridge.
ACPI: Found matching pin for 2.2.INTA at func 0: 10
ACPI: Found matching pin for 2.8.INTA at func 0: 5
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x104c, dev=0xac51, revid=0x00
        bus=2, slot=2, func=0
        class=06-07-00, hdrtype=0x02, mfdev=1
        cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
        intpin=a, irq=10
        powerspec 1  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0, size 12, enabled
pcib2: matched entry for 2.2.INTA (src \\_SB_.PCI0.LPC0.LNKA:0)
pcib2: slot 2 INTA routed to irq 10 via \\_SB_.PCI0.LPC0.LNKA
found-> vendor=0x104c, dev=0xac51, revid=0x00
        bus=2, slot=2, func=1
        class=06-07-00, hdrtype=0x02, mfdev=1
        cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
        intpin=a, irq=10
        powerspec 1  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0, size 12, enabled
pcib2: matched entry for 2.2.INTA (src \\_SB_.PCI0.LPC0.LNKA:0)
pcib2: slot 2 INTA routed to irq 10 via \\_SB_.PCI0.LPC0.LNKA
found-> vendor=0x1668, dev=0x0100, revid=0x11
        bus=2, slot=6, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
        lattimer=0x30 (1440 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D1 D2 D3  current D0
found-> vendor=0x125d, dev=0x1988, revid=0x12
        bus=2, slot=8, func=0
        class=04-01-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0001, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x30 (1440 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
        intpin=a, irq=5
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type I/O Port, range 32, base 0x4000, size  8, enabled
pcib2: requested I/O range 0x4000-0x40ff: in range
pcib2: matched entry for 2.8.INTA (src \\_SB_.PCI0.LPC0.LNKC:0)
pcib2: slot 8 INTA routed to irq 5 via \\_SB_.PCI0.LPC0.LNKC
cbb0: <TI1420 PCI-CardBus Bridge> irq 10 at device 2.0 on pci2
pcib2: cbb0 requested memory range 0xf0100000-0xf07fffff: good
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf0100000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: [ITHREAD]
cbb0: PCI Configuration space:
  0x00: 0xac51104c 0x02100007 0x06070000 0x00824008
  0x10: 0xf0100000 0x020000a0 0x20040302 0xfffff000
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010a
  0x40: 0x9500107b 0x00000001 0x00000000 0x00000000
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000
  0x80: 0x20449060 0x00000000 0x00000000 0x012c1262
  0x90: 0x606682c0 0x00000000 0x00000000 0x00000000
  0xa0: 0xfe110001 0x00c00000 0x00000002 0x0000001d
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <TI1420 PCI-CardBus Bridge> irq 10 at device 2.1 on pci2
pcib2: cbb1 requested memory range 0xf0100000-0xf07fffff: good
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf0101000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: [ITHREAD]
cbb1: PCI Configuration space:
  0x00: 0xac51104c 0x02100007 0x06070000 0x00824008
  0x10: 0xf0101000 0x020000a0 0x20060502 0xfffff000
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010a
  0x40: 0x9500107b 0x00000001 0x00000000 0x00000000
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000
  0x80: 0x20449060 0x00000000 0x00000000 0x012c1262
  0x90: 0x606682c0 0x00000000 0x00000000 0x00000000
  0xa0: 0xfe110001 0x00c00000 0x00000002 0x0000001d
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci2
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0x3000-0x3fff
pcib3:   memory decode     0xf0600000-0xf07fffff
pcib3:   no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
pci2: <multimedia, audio> at device 8.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1800-0x180f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1800
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
ata1: [ITHREAD]
pci0: <serial bus, USB> at device 31.2 (no driver attached)
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <serial bus, USB> at device 31.4 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 73
fdc0: [FILTER]
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x90 on acpi0
sio0: type 16550A
sio0: [FILTER]
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 546512822 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
acpi_acad0: acline initialization start
battery0: battery initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery1: battery initialization start
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
ad0: setting PIO4 on ICH2 chip
ad0: setting UDMA66 on ICH2 chip
ad0: 19077MB <TOSHIBA MK2016GAP U0.30 A> at ata0-master UDMA66
ad0: 39070080 sectors [38760C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
battery0: battery initialization done, tried 1 times
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd0: setting PIO4 on ICH2 chip
acd0: <MATSHITADVD-ROM SR-8175/G540> DVDROM drive at ata1 as master
acd0: read 4125KB/s (4125KB/s), 512KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
start_init: trying /sbin/init
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
Linux ELF exec handler installed
linprocfs registered
battery1: battery initialization failed, giving up
16.0179d49751c462c8 too long
15.fe5d78e7f017088e too short
stray irq7
stray irq7
stray irq7
stray irq7
too many stray irq 7's: not logging anymore
sl0: bpf attached
TCP: [210.234.26.252]:41531 to [192.168.1.126]:22 tcpflags 0x4<RST>; syncache_chkrst: Spurious RST without matching syncache entry (possibly syncookie only), segment ignored
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> on hostb0
hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf4000000
agp0: allocating GATT for aperture of size 36M


Non working table:
00 at pci0:0:0:    class=0x009586 card=0x00000000 chip=0x107b0000 rev=0x80 hdr=0x00
    class      = old
none0 at pci0:0:0: class=0x010000 card=0x00000000 chip=0x00000100 rev=0x00 hdr=0x00
    vendor     = 'Ncipher Corp. Ltd'
    class      = mass storage
    subclass   = SCSI
0 at pci0:0:0:     class=0x001e00 card=0x00000001 chip=0x00000000 rev=0x00 hdr=0x00
    class      = old
none1 at pci0:0:0: class=0x000000 card=0x00000000 chip=0x00000002 rev=0x00 hdr=0x00
    class      = old
    subclass   = non-VGA display device
none2 at pci0:0:0: class=0x000000 card=0x00000000 chip=0x00000000 rev=0x00 hdr=0x00
    class      = old
    subclass   = non-VGA display device
none3 at pci97:112:99:     class=0x000000 card=0x00000000 chip=0x00000000 rev=0x00 hdr=0x69
    class      = old
    subclass   = non-VGA display device
none4 at pci0:3:0: class=0x000000 card=0x00000000 chip=0x00000000 rev=0x00 hdr=0x00
    class      = old
    subclass   = non-VGA display device
none5 at pci67:36:12:      class=0x000000 card=0x00000300 chip=0x00000000 rev=0x00 hdr=0x05
    class      = old
    subclass   = non-VGA display device
none6 at pci0:149:134:     class=0x000000 card=0x030c2444 chip=0x00000300 rev=0x00 hdr=0x80
    class      = old
    subclass   = non-VGA display device
apci0 at pci0:0:123:       class=0x000076 card=0x10029500 chip=0x00034d46 rev=0x67 hdr=0x10
    class      = old
    subclass   = non-VGA display device
none7 at pci2:2:0: class=0x51ac06 card=0x107b0002 chip=0x104c9500 rev=0x07 hdr=0x00
Q¬0 at pci0:0:0:   class=0x00954c card=0x00010202 chip=0x107b0002 rev=0x10 hdr=0x00
    class      = old
none8 at pci1:0:0: class=0x010000 card=0x00000000 chip=0x00000602 rev=0x00 hdr=0x00
    class      = mass storage
    subclass   = SCSI


Good Table:
agp0 at pci0:0:0:  class=0x060000 card=0x9500107b chip=0x11308086 rev=0x11 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82815/EM/EP/P 815/EM/EP/P (Solano) Host to I/O Hub Bridge'
    class    = bridge
    subclass = HOST-PCI
pcib1 at pci0:1:0: class=0x060400 card=0x00000000 chip=0x11318086 rev=0x11 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82815/EM/EP/P 815/EM/EP/P (Solano) PCI to AGP Bridge'
    class    = bridge
    subclass = PCI-PCI
pcib2 at pci0:30:0:        class=0x060400 card=0x00000000 chip=0x24488086 rev=0x03 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
isab0 at pci0:31:0:        class=0x060100 card=0x00000000 chip=0x244c8086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801BAM (ICH2-M) LPC Interface Controller'
    class    = bridge
    subclass = PCI-ISA
atapci0 at pci0:31:1:      class=0x010180 card=0x9500107b chip=0x244a8086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801BAM (ICH2-M) UltraATA/100 IDE Controller'
    class    = mass storage
    subclass = ATA
uhci0 at pci0:31:2:        class=0x0c0300 card=0x9500107b chip=0x24428086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801BA/BAM (ICH2/ICH2-M) USB Universal Host Controller'
    class    = serial bus
    subclass = USB
ichsmb0 at pci0:31:3:      class=0x0c0500 card=0x9500107b chip=0x24438086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801BA/BAM (ICH2/ICH2-M) SMBus Controller'
    class    = serial bus
    subclass = SMBus
uhci1 at pci0:31:4:        class=0x0c0300 card=0x9500107b chip=0x24448086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801BA/BAM (ICH2/ICH2-M) USB Universal Host Controller'
    class    = serial bus
    subclass = USB
drm0 at pci1:0:0:  class=0x030000 card=0x9500107b chip=0x4d461002 rev=0x00 hdr=0x00
    vendor   = 'ATI Technologies'
    device   = 'Rage Mobility 128 AGP 4x'
    class    = display
    subclass = VGA
pcic0 at pci2:2:0: class=0x060700 card=0x9500107b chip=0xac51104c rev=0x00 hdr=0x02
    vendor   = 'Texas Instruments (TI)'
    device   = 'PCI1420 PC card CardBus Controller'
    class    = bridge
    subclass = PCI-CardBus
pcic1 at pci2:2:1: class=0x060700 card=0x9500107b chip=0xac51104c rev=0x00 hdr=0x02
    vendor   = 'Texas Instruments (TI)'
    device   = 'PCI1420 PC card CardBus Controller'
    class    = bridge
    subclass = PCI-CardBus
pcib3 at pci2:6:0: class=0x060400 card=0x00000080 chip=0x01001668 rev=0x11 hdr=0x01
    vendor   = 'Actiontec Electronics Inc.'
    device   = 'PCI to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
pcm0 at pci2:8:0:  class=0x040100 card=0x9500107b chip=0x1988125d rev=0x12 hdr=0x00
    vendor   = 'ESS Technology'
    device   = 'ES1988/9 Allegro-1 Audiodrive'
    class    = multimedia
    subclass = audio
fxp0 at pci3:4:0:  class=0x020000 card=0x11001668 chip=0x12298086 rev=0x08 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
    class    = network
    subclass = ethernet
ltmdm0 at pci3:8:0:        class=0x078000 card=0x24001668 chip=0x044811c1 rev=0x01 hdr=0x00
    vendor   = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)'
    device   = 'LT Winmodem 56k'
    class    = simple comms

>How-To-Repeat:
Just boot.
>Fix:


>Release-Note:
>Audit-Trail:
>Unformatted:


More information about the freebsd-bugs mailing list