6.2-RELEASE bge driver vs dell sc440
Jerry McAllister
jerrymc at msu.edu
Fri Mar 9 21:10:13 UTC 2007
On Fri, Mar 09, 2007 at 06:49:15PM +0100, Szabolcs G?czi wrote:
> Hi,
>
> I have dell sc440 server with onboard Broadcom gigabit nic.
>
> pciconf -lv output:
>
> none1 at pci5:0:0: class=0x020000 card=0x01df1028 chip=0x167a14e4 rev=0x02
> hdr=0x00
> vendor = 'Broadcom Corporation'
> class = network
> subclass = ethernet
>
> dmesg output:
>
> FreeBSD 6.2-RELEASE-p2 #3: Fri Mar 9 18:08:58 CET 2007
> root at xxx:/usr/obj/usr/src/sys/SMP
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) D CPU 3.00GHz (2992.59-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf65 Stepping = 5
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Features2=0xe49d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>,<b15>>
> AMD Features=0x20100000<NX,LM>
> AMD Features2=0x1<LAHF>
> Cores per package: 2
> real memory = 1072152576 (1022 MB)
> avail memory = 1040019456 (991 MB)
> ACPI APIC Table: <DELL B8K >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> ioapic0: Changing APIC ID to 8
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> lapic0: Forcing LINT1 to edge trigger
> kbd1 at kbdmux0
> acpi0: <DELL B8K > on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pcib2: <PCI-PCI bridge> at device 0.0 on pci1
> pci2: <PCI bus> on pcib2
> mpt0: <LSILogic SAS/SATA Adapter> port 0xdc00-0xdcff mem
> 0xefdec000-0xefdeffff,0xefdf0000-0xefdfffff irq 16 at device 8.0 on pci2
> mpt0: [GIANT-LOCKED]
> mpt0: MPI Version=1.5.12.0
> mpt0: mpt_cam_event: 0x16
> mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
> mpt0: mpt_cam_event: 0x12
> mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required).
> mpt0: mpt_cam_event: 0x12
> mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required).
> mpt0: mpt_cam_event: 0x16
> mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
> mpt0: mpt_cam_event: 0xb
> mpt0: Unhandled Event Notify Frame. Event 0xb (ACK not required).
> pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
> pci4: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
> pci5: <ACPI PCI bus> on pcib5
> pci5: <network, ethernet> at device 0.0 (no driver attached)
> ...
>
> and when i tried to kldload the if_bge i got this:
>
> module_register: module bge/miibus already exists!
> Module bge/miibus failed to register: 17
> module_register: module pci/bge already exists!
> Module pci/bge failed to register: 17
>
> and I have still no bge interface :(.
>
> Is there any chance got a driver for that nic?
Hmmm. Doesn't look like it is seeing anything for that card.
I just (recently a couple of weeks ago) installed 6.2 on a Dell 2950
that had:
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6>
Note that that Broadcom took a 'BCE' driver not a 'BGE' driver.
It was in the generic kernel, no extra kld's of kernel builds.
Doubt that means much to yours, but, maybe a different thing
to look for.
////jerry
>
> thx,
>
> sz
> _______________________________________________
> freebsd-bugs at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-bugs
> To unsubscribe, send any mail to "freebsd-bugs-unsubscribe at freebsd.org"
More information about the freebsd-bugs
mailing list