misc/108659: Mouse (Synaptics touchpad) cursor freezes for some
seconds (~5sec) in X
Gábris Gábor
gabrisgabor at gmail.com
Thu Feb 1 14:00:33 UTC 2007
>Number: 108659
>Category: misc
>Synopsis: Mouse (Synaptics touchpad) cursor freezes for some seconds (~5sec) in X
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Feb 01 14:00:32 GMT 2007
>Closed-Date:
>Last-Modified:
>Originator: Gábris Gábor
>Release: 6.2-RELEASE
>Organization:
>Environment:
FreeBSD perkele 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007 root at dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
>Description:
On my laptop, which is an Albacomp Eco Traveller V4 (as far as I know it is a rebranded Clevo M660S), when I the built-in touchpad, the mouse cursor randomly hangs for some seconds (approx. 4-5secs). It is likely to happen serailly, the cursor freezes for 5 seconds then it is released, then hangs again and this can happen up to 4-5 times in series. Then I can use the touchpad again normally, then it freezes again after some time. During this, the following messages appear in dmesg:
can't re-use a leaf (directional_scrolls)!
can't re-use a leaf (low_speed_threshold)!
can't re-use a leaf (min_movement)!
can't re-use a leaf (squelch_level)!
dmesg in verbose mode gives:
battery0: battery initialization failed, giving up
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
can't re-use a leaf (directional_scrolls)!
can't re-use a leaf (low_speed_threshold)!
can't re-use a leaf (min_movement)!
can't re-use a leaf (squelch_level)!
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
can't re-use a leaf (directional_scrolls)!
can't re-use a leaf (low_speed_threshold)!
can't re-use a leaf (min_movement)!
can't re-use a leaf (squelch_level)!
I have hw.psm.synaptics_support=1 in /boot/loader.conf, but the problem persists without ths line.
A verbose dmesg of the machine:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
root at dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0bba000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0bba1b0.
Preloaded elf module "/boot/kernel/if_vr.ko" at 0xc0bba25c.
Preloaded elf module "/boot/kernel/snd_via8233.ko" at 0xc0bba308.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc0bba3b8.
Preloaded elf module "/boot/kernel/uhid.ko" at 0xc0bba464.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc0bba510.
Preloaded elf module "/boot/kernel/acpi_video.ko" at 0xc0bba5bc.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0bba66c.
Preloaded elf module "/boot/kernel/atapicam.ko" at 0xc0bba718.
Preloaded elf module "/boot/kernel/cd9660_iconv.ko" at 0xc0bba7c8.
Preloaded elf module "/boot/kernel/libiconv.ko" at 0xc0bba87c.
module_register: module uhub/uhid already exists!
Module uhub/uhid failed to register: 17
module_register: module uhub/umass already exists!
Module uhub/umass failed to register: 17
module_register: module pci/vr already exists!
Module pci/vr failed to register: 17
module_register: module vr/miibus already exists!
Module vr/miibus failed to register: 17
Table 'FACP' at 0x1be9bf3c
Table 'APIC' at 0x1be9bfb0
MADT: Found table at 0x1be9bfb0
MP Configuration Table version 1.4 found at 0xc009e571
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
ACPI APIC Table: <PTLTD APIC >
Calibrating clock(s) ... i8254 clock: 1193173 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1596013572 Hz
CPU: Intel(R) Celeron(R) M CPU 420 @ 1.60GHz (1596.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0xc109<SSE3,MON,TM2,<b14>,<b15>>
AMD Features=0x100000<NX>
real memory = 468254720 (446 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001b671fff, 447008768 bytes (109133 pages)
avail memory = 448745472 (427 MB)
APIC: CPU 0 has ACPI ID 0
bios32: Found BIOS32 Service Directory header at 0xc00f8120
bios32: Entry = 0xfd6f0 (c00fd6f0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd6f0+0x16e
pnpbios: Found PnP BIOS data at 0xc00f81c0
pnpbios: Entry = f0000:c316 Rev = 1.0
Other BIOS signatures found:
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 10 polarity: low
ioapic0: intpin 10 trigger: level
ioapic0 <Version 0.3> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Jan 12 2007 10:40:02)
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
ioapic0: routing intpin 10 (ISA IRQ 10) to vector 48
acpi0: [MPSAFE]
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.LNKH] in namespace, AE_NOT_FOUND
SearchNode 0xc2e9f320 StartNode 0xc2e9f320 ReturnNode 0
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.LNKH] in namespace, AE_NOT_FOUND
SearchNode 0xc2e9f1c0 StartNode 0xc2e9f1c0 ReturnNode 0
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.LNKH] in namespace, AE_NOT_FOUND
SearchNode 0xc2e9f060 StartNode 0xc2e9f060 ReturnNode 0
pci_open(1): mode 1 addr port (0x0cf8) is 0x80007904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=03141106)
pcibios: BIOS version 2.10
Found $PIR table, 10 entries at 0xc00fdf20
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 0 8 A 0x01 3 4 6 9 10 11 12 14 15
slot 1 0 8 B 0x02 3 4 6 9 10 11 12 14 15
slot 1 0 8 C 0x03 3 4 6 9 10 11 12 14 15
slot 1 0 8 D 0x05 3 4 6 9 10 11 12 14 15
slot 2 0 9 A 0x02 3 4 6 9 10 11 12 14 15
slot 2 0 9 B 0x03 3 4 6 9 10 11 12 14 15
slot 2 0 9 C 0x05 3 4 6 9 10 11 12 14 15
slot 2 0 9 D 0x01 3 4 6 9 10 11 12 14 15
embedded 0 0 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 B 0x02 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 D 0x05 3 4 5 6 7 9 10 11 12 14 15
embedded 0 17 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 17 B 0x02 3 4 5 6 7 9 10 11 12 14 15
embedded 0 17 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 17 D 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 16 0 16 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 16 0 16 B 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 16 0 16 C 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 16 0 16 D 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 18 0 18 A 0x01 3 4 6 9 10 11 12 14 15
slot 18 0 18 B 0x02 3 4 6 9 10 11 12 14 15
slot 18 0 18 C 0x03 3 4 6 9 10 11 12 14 15
slot 18 0 18 D 0x05 3 4 6 9 10 11 12 14 15
slot 15 0 15 A 0x02 3 4 6 9 10 11 12 14 15
slot 15 0 15 B 0x02 3 4 6 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 6 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 6 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 6 9 10 11 12 14 15
embedded 0 1 D 0x05 3 4 6 9 10 11 12 14 15
embedded 0 2 A 0x01 3 4 6 9 10 11 12 14 15
embedded 0 2 B 0x02 3 4 6 9 10 11 12 14 15
embedded 0 2 C 0x03 3 4 6 9 10 11 12 14 15
embedded 0 2 D 0x05 3 4 6 9 10 11 12 14 15
embedded 0 3 A 0x01 3 4 6 9 10 11 12 14 15
embedded 0 3 B 0x02 3 4 6 9 10 11 12 14 15
embedded 0 3 C 0x03 3 4 6 9 10 11 12 14 15
embedded 0 3 D 0x05 3 4 6 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 17 func 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xcbd78000 pa 0x9d000
AcpiOsDerivePciId: bus 0 dev 0 func 3
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xb> port 0x62,0x66 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 16 17 18 19 20 21 22 23
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19 20 21 22 23
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19 20 21 22 23
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 16 17 18 19 20 21 22 23
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19 20 21 22 23
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19 20 21 22 23
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 22
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 22
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 22
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 21
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 21
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 21
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 9 10 11 12
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 9 10 11 12
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 9 10 11 12
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 9 10 11 12
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 9 10 11 12
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
pci_link8: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
pci_link8: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
pci_link8: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
pci_link9: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
pci_link9: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
pci_link9: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
pci_link10: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
pci_link10: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
pci_link10: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
pci_link11: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
pci_link11: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
pci_link11: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 9 10 11 12
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x4010
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1106, dev=0x0314, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base e0000000, size 28, enabled
found-> vendor=0x1106, dev=0x1314, revid=0x00
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x2314, revid=0x00
bus=0, slot=0, func=2
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x3208, revid=0x00
bus=0, slot=0, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x4314, revid=0x00
bus=0, slot=0, func=4
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x7314, revid=0x00
bus=0, slot=0, func=7
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0xb198, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1524, dev=0x1412, revid=0x10
bus=0, slot=14, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
found-> vendor=0x1524, dev=0x0530, revid=0x01
bus=0, slot=14, func=1
class=05-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x04 (1000 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 7, memory disabled
found-> vendor=0x1524, dev=0x0550, revid=0x01
bus=0, slot=14, func=2
class=08-05-01, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x20 (8000 ns), maxlat=0x48 (18000 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 8, memory disabled
found-> vendor=0x1524, dev=0x0551, revid=0x01
bus=0, slot=14, func=4
class=05-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x20 (8000 ns), maxlat=0x48 (18000 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 8, memory disabled
found-> vendor=0x1106, dev=0x3149, revid=0x80
bus=0, slot=15, func=0
class=01-01-8f, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001430, size 3, enabled
map[14]: type 4, range 32, base 00001424, size 2, enabled
map[18]: type 4, range 32, base 00001428, size 3, enabled
map[1c]: type 4, range 32, base 00001420, size 2, enabled
map[20]: type 4, range 32, base 00001400, size 4, enabled
map[24]: type 4, range 32, base 00001000, size 8, enabled
pcib0: matched entry for 0.15.INTB
pcib0: slot 15 INTB hardwired to IRQ 20
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00001410, size 4, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x81
bus=0, slot=16, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0015, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 00001440, size 5, enabled
pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.PIB_.ALKD:0)
pci_link3: Picked IRQ 21 with weight 0
pcib0: slot 16 INTA routed to irq 21 via \\_SB_.PCI0.PIB_.ALKD
found-> vendor=0x1106, dev=0x3038, revid=0x81
bus=0, slot=16, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0015, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 00001460, size 5, enabled
pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.PIB_.ALKD:0)
pcib0: slot 16 INTA routed to irq 21 via \\_SB_.PCI0.PIB_.ALKD
found-> vendor=0x1106, dev=0x3038, revid=0x81
bus=0, slot=16, func=2
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0015, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 00001480, size 5, enabled
pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.PIB_.ALKD:0)
pcib0: slot 16 INTB routed to irq 21 via \\_SB_.PCI0.PIB_.ALKD
found-> vendor=0x1106, dev=0x3038, revid=0x81
bus=0, slot=16, func=3
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0015, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 000014a0, size 5, enabled
pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.PIB_.ALKD:0)
pcib0: slot 16 INTB routed to irq 21 via \\_SB_.PCI0.PIB_.ALKD
found-> vendor=0x1106, dev=0x3104, revid=0x86
bus=0, slot=16, func=4
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f5200000, size 8, enabled
pcib0: matched entry for 0.16.INTC (src \\_SB_.PCI0.PIB_.ALKD:0)
pcib0: slot 16 INTC routed to irq 21 via \\_SB_.PCI0.PIB_.ALKD
found-> vendor=0x1106, dev=0x3227, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3059, revid=0x60
bus=0, slot=17, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001800, size 8, enabled
pcib0: matched entry for 0.17.INTC (src \\_SB_.PCI0.PIB_.ALKC:0)
pci_link2: Picked IRQ 22 with weight 0
pcib0: slot 17 INTC routed to irq 22 via \\_SB_.PCI0.PIB_.ALKC
found-> vendor=0x1106, dev=0x3068, revid=0x80
bus=0, slot=17, func=6
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001c00, size 8, port disabled
found-> vendor=0x1106, dev=0x3065, revid=0x78
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00002000, size 8, enabled
map[14]: type 1, range 32, base f5200400, size 8, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 23
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xf4000000-0xf4ffffff
pcib1: prefetched decode 0xf0000000-0xf3ffffff
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.PPB_ - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1106, dev=0x3344, revid=0x01
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base f0000000, size 26, enabled
pcib1: (null) requested memory range 0xf0000000-0xf3ffffff: good
map[14]: type 1, range 32, base f4000000, size 24, enabled
pcib1: (null) requested memory range 0xf4000000-0xf4ffffff: good
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
acpi_video0: <ACPI video extension> mem 0xf0000000-0xf3ffffff,0xf4000000-0xf4ffffff irq 16 at device 0.0 on pci1
found VGA CRT or VESA Compatible Analog Monitor(100), idx#0, port#0, detectable by BIOS, head #0
found Internal/Integrated Digital Flat Panel(110), idx#0, port#1, detectable by BIOS, head #0
cbb0: <PCI-CardBus Bridge> at device 14.0 on pci0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.14.INTA
pcib0: slot 14 INTA hardwired to IRQ 16
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x14121524 0x02100007 0x06070010 0x00822000
0x10: 0x80000000 0x020000a0 0x20030200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07400110
0x40: 0x06621558 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00409020 0x00000000 0x00000000 0x00001202
0x90: 0x604400c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe010001 0x00c00000 0x00000000 0x0000001d
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00001003 0x00800080 0x00080700 0x000007fe
0xd0: 0x00000020 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci0: <memory, flash> at device 14.1 (no driver attached)
pci0: <base peripheral> at device 14.2 (no driver attached)
pci0: <memory, flash> at device 14.4 (no driver attached)
atapci0: <VIA 6420 SATA150 controller> port 0x1430-0x1437,0x1424-0x1427,0x1428-0x142f,0x1420-0x1423,0x1400-0x140f,0x1000-0x10ff irq 20 at device 15.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1400
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 50
atapci0: [MPSAFE]
atapci0: Reserved 0x100 bytes for rid 0x24 type 4 at 0x1000
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1430
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x1424
ata2: SATA connect status=00000000
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x1428
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0x1420
ata3: SATA connect status=00000000
ata3: [MPSAFE]
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1410-0x141f at device 15.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1410
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=01
ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=10 stat1=01 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0x1440-0x145f irq 21 at device 16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1440
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 53
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x1460-0x147f irq 21 at device 16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1460
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x1480-0x149f irq 21 at device 16.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1480
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0x14a0-0x14bf irq 21 at device 16.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x14a0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xf5200000-0xf52000ff irq 21 at device 16.4 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xf5200000
ehci0: [GIANT-LOCKED]
ehci0: Dropped interrupts workaround enabled
usb4: waiting for BIOS to give up control
usb4: timed out waiting for BIOS
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8237> port 0x1800-0x18ff irq 22 at device 17.5 on pci0
AcpiOsDerivePciId: bus 0 dev 17 func 5
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1800
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54
pcm0: [MPSAFE]
pcm0: <Unknown AC97 Codec (id = 0x56494123)>
pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, reserved 5
pcm0: ac97 codec dac ready count: 0
pcm0: sndbuf_setmap 1b0d4000, 1000; 0xc2fc0000 -> 1b0d4000
pcm0: sndbuf_setmap 1ad72000, 1000; 0xc2fbe000 -> 1ad72000
pcm0: sndbuf_setmap 1a45b000, 1000; 0xc2fe7000 -> 1a45b000
pcm0: sndbuf_setmap 1b339000, 1000; 0xc2fe5000 -> 1b339000
pcm0: sndbuf_setmap 1b297000, 1000; 0xc2fe3000 -> 1b297000
pcm0: sndbuf_setmap 1b1f5000, 1000; 0xc2fe1000 -> 1b1f5000
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
pci0: <simple comms> at device 17.6 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x2000-0x20ff mem 0xf5200400-0xf52004ff irq 23 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x2000
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x004063, model 0x0032, rev. 10
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:90:f5:55:49:7d
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 55
vr0: [MPSAFE]
battery0: <ACPI Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0-00, 7 buttons
psm0: config:00000000, flags:00000008, packet size:6
psm0: syncmask:c0, syncbits:00
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ahc_isa_probe 1: ioport 0x1c00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcd800-0xcf7ff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0xc401 0xc401 0xc401 0xc401
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xc401 0xc401 0xc401 0xc401
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 66500364 hz
Timecounter "TSC" frequency 1596013572 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
rr232x: no controller detected.
battery0: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on 8237 chip
acd0: setting UDMA33 on 8237 chip
acd0: <PHILIPS DVD+/-RW SDVD8820/AX04> DVDR drive at ata0 as master
acd0: read 4148KB/s (4134KB/s) write 4134KB/s (4133KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad2: setting PIO4 on 8237 chip
ad2: setting UDMA100 on 8237 chip
ad2: 57241MB <SAMSUNG HM060HC YJ100-19> at ata1-master UDMA100
ad2: 117231408 sectors [116301C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad2
ad2: VIA check1 failed
ad2: Adaptec check1 failed
ad2: LSI (v3) check1 failed
ad2: LSI (v2) check1 failed
ad2: FreeBSD check1 failed
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe0:ata0:0:0:0): error 6
(probe0:ata0:0:0:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
pass0 at ata0 bus 0 target 0 lun 0
pass0: <PHILIPS DVD+-RW SDVD8820 AX04> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
GEOM: new disk cd0
ATA PseudoRAID loaded
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PHILIPS DVD+-RW SDVD8820 AX04> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
Trying to mount root from ufs:/dev/ad2s3a
start_init: trying /sbin/init
splash: image decoder found: green_saver
battery0: battery initialization failed, giving up
>How-To-Repeat:
It seems that it is in connection with battery status querying.
It is more likely to happen without battery (on AC power) than with on battery power.
>Fix:
Booting with ACPI disabled.
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list