kern/103275: [em] on Tyan S5360 lose link at IP configuration
Fabian Wenk
fabian at wenks.ch
Thu Sep 14 10:50:49 PDT 2006
>Number: 103275
>Category: kern
>Synopsis: [em] on Tyan S5360 lose link at IP configuration
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Sep 14 17:50:28 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator: Fabian Wenk
>Release: FreeBSD/i386 6.1R
>Organization:
>Environment:
FreeBSD muertschen.ethz.ch 6.1-RELEASE-p5 FreeBSD 6.1-RELEASE-p5 #4: Mon Aug 28 16:47:03 CEST 2006 root at muertschen.ethz.ch:/usr/obj/usr/src/sys/MUERTSCHEN i386
>Description:
After the upgrade from FreeBSD/i386 6.0R to 6.1R at reboot when IP
configuration is done the link on em0 get lost for about 2 seconds.
Processes starting right after this can not connect to the network, eg.
ntpdate. Even setting the media option in ifconfig_em0 did not help.
Here is the output from the console during boot:
---8<--------------------------------------------------------------------
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE-p5 #4: Mon Aug 28 16:47:03 CEST 2006
root at muertschen.ethz.ch:/usr/obj/usr/src/sys/MUERTSCHEN
ACPI APIC Table: <PTLTD APIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2800.13-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
AMD Features=0x20100000<NX,LM>
Logical CPUs per core: 2
real memory = 2146893824 (2047 MB)
avail memory = 2100367360 (2003 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic3 <Version 2.0> irqs 72-95 on motherboard
ioapic4 <Version 2.0> irqs 96-119 on motherboard
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 1.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0x2000-0x203f mem 0xdd200000-0xdd21ffff irq 24 at device 8.0 on pci2
em0: Ethernet address: 00:e0:81:34:3f:1e
em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0x2040-0x207f mem 0xdd220000-0xdd23ffff irq 25 at device 8.1 on pci2
em1: Ethernet address: 00:e0:81:34:3f:1f
pci1: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
iir0: <Intel Integrated RAID Controller> mem 0xdf200000-0xdf203fff irq 48 at device 3.0 on pci3
iir0: [GIANT-LOCKED]
iir1: <ICP Disk Array Controller> mem 0xdf204000-0xdf207fff irq 53 at device 6.0 on pci3
iir1: [GIANT-LOCKED]
pci1: <base peripheral, interrupt controller> at device 0.3 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 5.0 on pci0
pci6: <PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pci8: <ACPI PCI bus> on pcib8
iir2: <ICP Disk Array Controller> mem 0xdf300000-0xdf303fff irq 72 at device 3.0 on pci8
iir2: [GIANT-LOCKED]
pci7: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 0.2 on pci7
pci9: <ACPI PCI bus> on pcib9
iir3: <ICP Disk Array Controller> mem 0xdf400000-0xdf403fff irq 96 at device 3.0 on pci9
iir3: [GIANT-LOCKED]
pci7: <base peripheral, interrupt controller> at device 0.3 (no driver attached)
pcib10: <PCI-PCI bridge> at device 7.0 on pci0
pci10: <PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib11
pci11: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1420-0x142f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2800126917 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDRW <TSSTcorpCDW/DVD SN-M242C/TS02> at ata0-master UDMA33
Waiting 5 seconds for SCSI devices to settle
da0 at iir0 bus 2 target 0 lun 0
da0: <ICP Host Drive #00 > Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 76277MB (156216060 512 byte sectors: 255H 63S/T 9724C)
da1 at iir1 bus 4 target 0 lun 0
da1: <ICP Host Drive #00 > Fixed Direct Access SCSI-2 device
da1: Tagged Queueing Enabled
da1: 1669167MB (3418455285 512 byte sectors: 255H 63S/T 212789C)
da2 at iir1 bus 4 target 8 lun 0
da2: <ICP Host Drive #08 > Fixed Direct Access SCSI-2 device
da2: Tagged Queueing Enabled
da2: 1669167MB (3418455285 512 byte sectors: 255H 63S/T 212789C)
da3 at iir2 bus 4 target 0 lun 0
da3: <ICP Host Drive #00 > Fixed Direct Access SCSI-2 device
da3: Tagged Queueing Enabled
da3: 1669167MB (3418455285 512 byte sectors: 255H 63S/T 212789C)
da4 at iir2 bus 4 target 8 lun 0
da4: <ICP Host Drive #08 > Fixed Direct Access SCSI-2 device
da4: Tagged Queueing Enabled
da4: 1669167MB (3418455285 512 byte sectors: 255H 63S/T 212789C)
da5 at iir3 bus 4 target 0 lun 0
da5: <ICP Host Drive #00 > Fixed Direct Access SCSI-2 device
da5: Tagged Queueing Enabled
da5: 1669167MB (3418455285 512 byte sectors: 255H 63S/T 212789C)
da6 at iir3 bus 4 target 8 lun 0
da6: <ICP Host Drive #08 > Fixed Direct Access SCSI-2 device
da6: Tagged Queueing Enabled
da6: 1669167MB (3418455285 512 byte sectors: 255H 63S/T 212789C)
Trying to mount root from ufs:/dev/da0s1a
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
Configuring CCD devices.
swapon: adding /dev/da0s1b as swap device
Starting file system checks:
/dev/da0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1a: clean, 32757062 free (46670 frags, 4088799 blocks, 0.1% fragmentation)
/dev/ccd0: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ccd0: clean, 431861013 free (3575933 frags, 53535635 blocks, 0.1% fragmentation)
Setting hostname: muertschen.ethz.ch.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=4b<RXCSUM,TXCSUM,VLAN_MTU,POLLING>
inet 129.132.80.19 netmask 0xffffffc0 broadcast 129.132.80.63
ether 00:e0:81:34:3f:1e
media: Ethernet 1000baseTX (autoselect)
status: no carrier
add net default: gateway 129.132.80.1
Additional routing options:.
Starting devd.
hw.acpi.cpu.cx_lowest: C1 -> C1
Mounting NFS file systems:.
Creating and/or trimming log files:.
Starting syslogd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
/usr/local/lib/compat/pkg /usr/local/libdata/ldconfig/portupgrade
/usr/local/libdata/ldconfig/compat5x /usr/local/libdata/ldconfig/compat4x
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Initial i386 initialization:.
Additional ABI support:.
Setting date via ntp.
Error : hostname nor servname provided, or not known
14 Sep 19:01:07 ntpdate[339]: can't find host time1.ethz.ch
Error : hostname nor servname provided, or not known
14 Sep 19:01:07 ntpdate[339]: can't find host time1.phys.ethz.ch
Error : hostname nor servname provided, or not known
14 Sep 19:01:07 ntpdate[339]: can't find host time2.phys.ethz.ch
14 Sep 19:01:07 ntpdate[339]: no servers can be used, exiting
Starting rpcbind.
Setting NIS domain: phys.ethz.ch.
Starting ypbind.
NFS access cache time=2
Starting amd.
Starting mountd.
Starting nfsd.
Starting statd.
rpc.statd: svc_tli_create: could not open connection for udp6
rpc.statd: svc_tli_create: could not open connection for tcp6
Starting lockd.
Starting local daemons:
/opt/bb/etc/bb-bbexttab 100% of 1685 B 7152 kBps
/opt/bb/etc/bb-cputab 100% of 447 B 2285 kBps
/opt/bb/etc/bb-dftab 100% of 2461 B 11 MBps
/opt/bb/etc/bb-hosts 100% of 17 kB 19 MBps
/opt/bb/etc/bb-msgstab 0 B 0 Bps
/opt/bb/etc/bb-proctab 100% of 23 kB 8190 kBps
Starting the Big Brother System & Network monitor
Starting external scripts
Starting external script raid
Starting Local tests (bb-local)...
Big Brother 1.9c started
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list