kern/104755: Making ISO image with k3b hangs 6.2-PRERELEASE
Alex Masterov
alex at infobit.ru
Tue Oct 24 08:40:22 PDT 2006
>Number: 104755
>Category: kern
>Synopsis: Making ISO image with k3b hangs 6.2-PRERELEASE
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue Oct 24 15:40:20 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator: Alex Masterov
>Release: FreeBSD 6.2-PRERELEASE i386
>Organization:
>Environment:
FreeBSD home.bit.ab.ru 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #0: Mon Oct 23 21:16:29 OMSST 2006 alex at home.bit.ab.ru:/usr/obj/usr/src/sys/GENERIC i386
>Description:
At random moment reading stops. System hangs several seconds after this.
After hanging I can not even switch virtual consoles with Alt-F1, Alt-F2 etc.
In /var/log/messages there are a lot of lines like these:
Oct 24 21:11:43 home kernel: cam_periph_mapmem: attempt to map 262144 bytes, which is greater than DFLTPHYS(65536)
Oct 24 21:11:43 home kernel: cam_periph_mapmem: attempt to map 260096 bytes, which is greater than DFLTPHYS(65536)
Sometimes system doesn't hang, but reading stops and k3b reports read error. In /var/log messages in this case a lot of lines like:
Oct 23 21:39:07 home kernel: ata1: FAILURE - non aligned DMA transfer attempted
Oct 23 21:39:07 home kernel: acd0: setting up DMA failed
Oct 23 21:39:07 home kernel: ata1: FAILURE - non aligned DMA transfer attempted
Oct 23 21:39:07 home kernel: acd0: setting up DMA failed
Oct 23 21:39:07 home kernel: ata1: FAILURE - non aligned DMA transfer attempted
Oct 23 21:39:07 home kernel: acd0: setting up DMA failed
Sometimes (rarely) reading completes successfuly.
readcd does not hang system but often also stops at random moment but 10-20 seconds later it continues.
readcd output:
[alex at home /usr/home/alex]$ readcd dev=2,0,0 f=/dev/null
Read speed: 8467 kB/s (CD 48x, DVD 6x).
Write speed: 8467 kB/s (CD 48x, DVD 6x).
Capacity: 2054448 Blocks = 4108896 kBytes = 4012 MBytes = 4207 prMB
Sectorsize: 2048 Bytes
Copy from SCSI (2,0,0) disk to file '/dev/null'
end: 2054448
readcd: Input/output error. read_g1: scsi sendcmd: retryable error
CDB: 28 00 00 03 65 E0 00 00 20 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 00 29 00 00 00 00 00 00 00 00 00 0
0 00 00 00 00 00 00 00 00 00
Sense Key: 0x6 Unit Attention, Segment 0
Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred) Fru 0
x0
Sense flags: Blk 0 (not valid)
cmd finished after 40.113s timeout 40s
readcd: Input/output error. Cannot read source disk
readcd: Retrying from sector 222688.
addr: 2054448 cnt: 16..........addr: 222720 cnt: 32
Time total: 332.465sec
Read 4108896.00 kB at 12358.9 kB/sec.
I'll try to obtain any needed debug info.
Here is dmesg whith verbose boot:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #0: Mon Oct 23 21:16:29 OMSST 2006
alex at home.bit.ab.ru:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc103c000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc103c188.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc103c234.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc103c2e0.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc103c38c.
Preloaded elf module "/boot/kernel/atapicam.ko" at 0xc103c438.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc103c4e8.
Calibrating clock(s) ... i8254 clock: 1193311 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1840214857 Hz
CPU: AMD Athlon(tm) XP 2500+ (1840.21-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001425000 - 0x000000001f6abfff, 505966592 bytes (123527 pages)
avail memory = 507510784 (484 MB)
mptable_probe: MP Config Table has bad signature:
Table 'FACP' at 0x1fff3040
Table 'APIC' at 0x1fff7b80
MADT: Found table at 0x1fff7b80
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
ACPI APIC Table: <Nvidia AWRDACPI>
bios32: Found BIOS32 Service Directory header at 0xc00fb040
bios32: Entry = 0xfb4d0 (c00fb4d0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb500
pnpbios: Found PnP BIOS data at 0xc00fbf60
pnpbios: Entry = f0000:bf90 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Oct 23 2006 21:13:33)
npx0: INT 16 interface
acpi0: <Nvidia AWRDACPI> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000888
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=01e010de)
pcibios: BIOS version 2.10
Found $PIR table, 10 entries at 0xc00fdec0
PCI-Only Interrupts: 5 11
Location Bus Device Pin Link IRQs
slot 1 0 8 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 1 0 8 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 1 0 8 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 1 0 8 D 0x04 3 4 5 7 9 10 11 12 14 15
slot 2 0 12 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 2 0 12 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 2 0 12 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 2 0 12 D 0x04 3 4 5 7 9 10 11 12 14 15
slot 3 255 31 A 0x0f 3 4 5 7 9 10 11 12 14 15
slot 3 255 31 B 0x0f 3 4 5 7 9 10 11 12 14 15
slot 3 255 31 C 0x0f 3 4 5 7 9 10 11 12 14 15
slot 3 255 31 D 0x0f 3 4 5 7 9 10 11 12 14 15
slot 4 1 6 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 4 1 6 B 0x04 3 4 5 7 9 10 11 12 14 15
slot 4 1 6 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 4 1 6 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 1 7 A 0x04 3 4 5 7 9 10 11 12 14 15
slot 5 1 7 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 5 1 7 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 1 7 D 0x03 3 4 5 7 9 10 11 12 14 15
slot 6 1 8 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 6 1 8 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 6 1 8 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 6 1 8 D 0x04 3 4 5 7 9 10 11 12 14 15
slot 7 1 9 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 7 1 9 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 7 1 9 C 0x04 3 4 5 7 9 10 11 12 14 15
slot 7 1 9 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 8 1 10 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 8 1 10 B 0x04 3 4 5 7 9 10 11 12 14 15
slot 8 1 10 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 8 1 10 D 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 30 A 0x04 3 4 5 7 9 10 11 12 14 15
embedded 0 30 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 30 C 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 30 D 0x02 3 4 5 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xcdc29000 pa 0x9e000
AcpiOsDerivePciId: bus 0 dev 1 func 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link8: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link8: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link8: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link9: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link9: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link9: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link10: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link10: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link10: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link11: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link11: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link11: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link12: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link12: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link12: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link13: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link13: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link13: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link14: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link14: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link14: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link15: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link15: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link15: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link16: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 16 N 0 16
pci_link16: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 16 N 0 16
pci_link16: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 16
pci_link17: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 17 N 0 17
pci_link17: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 17 N 0 17
pci_link17: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 17
pci_link18: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 18 N 0 18
pci_link18: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 18 N 0 18
pci_link18: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 18
pci_link19: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 19 N 0 19
pci_link19: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 19 N 0 19
pci_link19: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 19
pci_link20: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 16 N 0 16
pci_link20: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 16 N 0 16
pci_link20: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 16
pci_link21: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link21: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link21: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link22: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link22: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link22: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link23: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link23: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link23: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link24: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link24: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link24: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link25: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link25: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link25: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link26: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link26: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link26: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link27: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 23 N 0 23
pci_link27: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 23 N 0 23
pci_link27: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 23
pci_link28: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link28: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link28: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link29: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link29: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link29: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link30: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link30: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link30: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link31: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link31: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
pci_link31: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x10de, dev=0x01e0, revid=0xc1
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base d0000000, size 27, enabled
found-> vendor=0x10de, dev=0x01eb, revid=0xc1
bus=0, slot=0, func=1
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x01ee, revid=0xc1
bus=0, slot=0, func=2
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x01ed, revid=0xc1
bus=0, slot=0, func=3
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x01ec, revid=0xc1
bus=0, slot=0, func=4
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x01ef, revid=0xc1
bus=0, slot=0, func=5
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0060, revid=0xa4
bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0064, revid=0xa2
bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000d000, size 5, enabled
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.APCS:0)
ioapic0: Changing polarity for pin 23 to high
pcib0: slot 1 INTA routed to irq 23 via \\_SB_.PCI0.APCS
found-> vendor=0x10de, dev=0x0067, revid=0xa4
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e2004000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.APCF:0)
pci_link21: Picked IRQ 20 with weight 0
ioapic0: Changing polarity for pin 20 to high
pcib0: slot 2 INTA routed to irq 20 via \\_SB_.PCI0.APCF
found-> vendor=0x10de, dev=0x0067, revid=0xa4
bus=0, slot=2, func=1
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e2005000, size 12, enabled
pcib0: matched entry for 0.2.INTB (src \\_SB_.PCI0.APCG:0)
pci_link22: Picked IRQ 21 with weight 0
ioapic0: Changing polarity for pin 21 to high
pcib0: slot 2 INTB routed to irq 21 via \\_SB_.PCI0.APCG
found-> vendor=0x10de, dev=0x0068, revid=0xa4
bus=0, slot=2, func=2
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=c, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e2000000, size 8, enabled
pcib0: matched entry for 0.2.INTC (src \\_SB_.PCI0.APCL:0)
pci_link28: Picked IRQ 22 with weight 0
ioapic0: Changing polarity for pin 22 to high
pcib0: slot 2 INTC routed to irq 22 via \\_SB_.PCI0.APCL
found-> vendor=0x10de, dev=0x0066, revid=0xa1
bus=0, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e2001000, size 12, enabled
map[14]: type 4, range 32, base 0000d400, size 3, enabled
pcib0: matched entry for 0.4.INTA (src \\_SB_.PCI0.APCH:0)
pci_link23: Picked IRQ 20 with weight 1
pcib0: slot 4 INTA routed to irq 20 via \\_SB_.PCI0.APCH
found-> vendor=0x10de, dev=0x006a, revid=0xa1
bus=0, slot=6, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000d800, size 8, enabled
map[14]: type 4, range 32, base 0000dc00, size 7, enabled
map[18]: type 1, range 32, base e2002000, size 12, enabled
pcib0: matched entry for 0.6.INTA (src \\_SB_.PCI0.APCJ:0)
pci_link25: Picked IRQ 21 with weight 1
pcib0: slot 6 INTA routed to irq 21 via \\_SB_.PCI0.APCJ
found-> vendor=0x10de, dev=0x006c, revid=0xa3
bus=0, slot=8, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0065, revid=0xa2
bus=0, slot=9, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x10de, dev=0x01e8, revid=0xc1
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
Correcting nForce2 C1 CPU disconnect hangs
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xe2004000-0xe2004fff irq 20 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe2004000
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 49
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xe2005000-0xe2005fff irq 21 at device 2.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe2005000
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <NVIDIA nForce2 USB 2.0 controller> mem 0xe2000000-0xe20000ff irq 22 at device 2.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xe2000000
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 51
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <NVIDIA nForce2 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
umass0: Generic Mass Storage Device, rev 2.00/1.27, addr 2
umass0:0:0:-1: Attached to scbus0
nve0: <NVIDIA nForce MCP2 Networking Adapter> port 0xd400-0xd407 mem 0xe2001000-0xe2001fff irq 20 at device 4.0 on pci0
nve0: nvenetlib.o version 1.0-13
nve0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe2001000
nve0: Ethernet address 00:04:61:5b:aa:d5
miibus0: <MII bus> on nve0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nve0: bpf attached
nve0: Ethernet address: 00:04:61:5b:aa:d5
nve0: [MPSAFE]
pcm0: <nVidia nForce2> port 0xd800-0xd8ff,0xdc00-0xdc7f mem 0xe2002000-0xe2002fff irq 21 at device 6.0 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800
pcm0: Reserved 0x80 bytes for rid 0x14 type 4 at 0xdc00
pcm0: [MPSAFE]
pcm0: <Avance Logic ALC655 AC97 Codec (id = 0x414c4760)>
pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features reserved 1, center DAC, surround DAC, LFE DAC, reserved 5
pcm0: ac97 codec dac ready count: 0
pcm0: sndbuf_setmap 1f23a000, 4000; 0xd5c7f000 -> 1f23a000
pcm0: sndbuf_setmap 1f236000, 4000; 0xd5c83000 -> 1f236000
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
atapci0: <nVidia nForce2 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 9.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 52
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x04 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 53
ata1: [MPSAFE]
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xe0000000-0xe1ffffff
pcib2: prefetched decode 0xd8000000-0xdfffffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x10de, dev=0x0181, revid=0xc1
bus=2, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e0000000, size 24, enabled
pcib2: (null) requested memory range 0xe0000000-0xe0ffffff: good
map[14]: type 3, range 32, base d8000000, size 27, enabled
pcib2: (null) requested memory range 0xd8000000-0xdfffffff: good
pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.APC4:0)
ioapic0: Changing polarity for pin 19 to high
pcib2: slot 0 INTA routed to irq 19 via \\_SB_.PCI0.APC4
nvidia0: <GeForce4 MX 440 with AGP8X> mem 0xe0000000-0xe0ffffff,0xd8000000-0xdfffffff irq 19 at device 0.0 on pci2
nvidia0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xe0000000
nvidia0: Reserved 0x8000000 bytes for rid 0x14 type 3 at 0xd8000000
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 54
nvidia0: [GIANT-LOCKED]
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 55
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x821 0x831 0x821 0x821
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56
sio1: irq maps: 0x821 0x829 0x821 0x821
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 57
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 58
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 59
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 60
psm0: [GIANT-LOCKED]
psm0: model NetMouse/NetScroll Optical, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
unknown: status reg test failed 0
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 167291721 hz
Timecounter "TSC" frequency 1840214857 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
rr232x: no controller detected.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on nForce2 chip
ad0: setting UDMA100 on nForce2 chip
ad0: 114473MB <Seagate ST3120022A 8.54> at ata0-master UDMA100
ad0: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue
ad0: nVidia check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on nForce2 chip
acd0: setting UDMA33 on nForce2 chip
acd0: <NEC DVD RW ND-3540A/1.01> DVDR drive at ata1 as master
acd0: read 8268KB/s (8268KB/s) write 8268KB/s (8268KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: 120mm data disc
pcm0: measured ac97 link rate at 47989 Hz, will use 48000 Hz
GEOM: new disk ad0
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
pass0: 40.000MB/s transfers
pass1 at umass-sim0 bus 0 target 0 lun 1
pass1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
pass1: 40.000MB/s transfers
pass2 at umass-sim0 bus 0 target 0 lun 2
pass2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device
pass2: 40.000MB/s transfers
pass3 at umass-sim0 bus 0 target 0 lun 3
pass3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
pass3: 40.000MB/s transfers
ATA PseudoRAID loaded
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(da3:umass-sim0:0:0:3): error 6
(da3:umass-sim0:0:0:3): Unretryable Error
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
pass4 at ata1 bus 0 target 0 lun 0
pass4: <_NEC DVD_RW ND-3540A 1.01> Removable CD-ROM SCSI-0 device
pass4: Serial Number [
pass4: 33.000MB/s transfers
cd0 at ata1 bus 0 target 0 lun 0
cd0: <_NEC DVD_RW ND-3540A 1.01> Removable CD-ROM SCSI-0 device
cd0: Serial Number [
cd0: 33.000MB/s transfers
cd0: cd present [2054432 x 2048 byte records]
GEOM: new disk da0
GEOM: new disk da1
GEOM: new disk da2
GEOM: new disk da3
GEOM: new disk cd0
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
Unretryable error
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
Unretryable error
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
Unretryable error
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
Opened disk da1 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
Unretryable error
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
Unretryable error
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
Unretryable error
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
Opened disk da2 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
Unretryable error
(da3:umass-sim0:0:0:3): error 6
(da3:umass-sim0:0:0:3): Unretryable Error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
Unretryable error
(da3:umass-sim0:0:0:3): error 6
(da3:umass-sim0:0:0:3): Unretryable Error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
Unretryable error
(da3:umass-sim0:0:0:3): error 6
(da3:umass-sim0:0:0:3): Unretryable Error
Opened disk da3 -> 6
Trying to mount root from ufs:/dev/ad0s3a
WARNING: / was not properly dismounted
start_init: trying /sbin/init
splash: image decoder found: green_saver
>How-To-Repeat:
Start k3b.
Insert DVD (I tried mostly DVD+-R).
Tools->Copy DVD->Only create image->Start.
Wait for hang.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list