kern/104678: SMP not working on Turion XP Laptop

Dan Olson danolson at visi.com
Sun Oct 22 10:00:59 PDT 2006


>Number:         104678
>Category:       kern
>Synopsis:       SMP not working on Turion XP Laptop
>Confidential:   no
>Severity:       serious
>Priority:       low
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Sun Oct 22 17:00:39 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator:     Dan Olson
>Release:        6.2-PRERELEASE
>Organization:
>Environment:
FreeBSD tron.danolson.dsl.visi.com 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #0: Sun Oct 22 10:00:30 CDT 2006     olson at tron.danolson.dsl.visi.com:/usr/obj/usr/src/sys/TRON  i386
>Description:
SMP doesn't work on a new Turion X2 laptop. The laptop is an HP dv6119us.

Laptop appears to act normally by entering set hint.apic.0.disabled=1 at the loader prompt.

When that is not set, the Laptop appears to lock up but accepts keyboard input. It won't display for about 10 seconds unless more keys are press. If no keys are pressed it doesn't display the input.

I haven't been able to capture a vmstat -i or the sysctl values for hw.acpi but will try.

I've compiled in the debugger and will try to capture more output from it. When breaking to the debugger this is output:

KDB: enter: manual  escape to debugger
[thread pid 19 tid 100025]
Stopped at 0xc06905ff = kdb_enter+0x2b: nop

Doing a ps gives this for pid 19

19  0  0  0  RL    CPU0 [swi6: Giant taskq]

I don't know if that is important. It is my first time using this debugger.

Below is the verbose dmesg output that I was capture:


Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #0: Sun Oct 22 10:00:30 CDT 2006
    olson at tron.danolson.dsl.visi.com:/usr/obj/usr/src/sys/TRON
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc107a000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc107a1d0.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc107a27c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc107a328.
Calibrating clock(s) ... i8254 clock: 1193262 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1607328579 Hz
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-50 (1607.33-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40f82  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8>
    HTT bit cleared - FreeBSD does not have licensing issues requiring it.

  Cores per package: 2
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 1039138816 (991 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001428000 - 0x000000003cd4bfff, 999440384 bytes (244004 pages)
avail memory = 998699008 (952 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f8a10
bios32: Entry = 0xfdcf4 (c00fdcf4)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfdcf0+0x0
pnpbios: Found PnP BIOS data at 0xc00f8a60
pnpbios: Entry = e768:9621  Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
WITNESS: spin lock hptlock not in order list
rr232x: RocketRAID 232x controller driver v1.02 (Oct 22 2006 10:00:11)
npx0: INT 16 interface
acpi0: <HP   RSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80007004
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=050000] [hdr=80] is there (id=02f010de)
pcibios: BIOS_PRESENT call failed
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 10 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xd90a4000 pa 0x9c000
atpic: Programming IRQ9 as level/low
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 10 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 10 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 10 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 10 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 10 func 1
ACPI timer: 1/2 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
pci_link0: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link0: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link0: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link1: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  5 7 9 10 11 14 15
pci_link1: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  5 7 9 10 11 14 15
pci_link1: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link2: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  5 7 9 10 11 14 15
pci_link2: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  5 7 9 10 11 14 15
pci_link2: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link3: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link3: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link3: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link4: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link4: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link4: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link5: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link5: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link5: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link6: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  5 7 9 10 11 14 15
pci_link6: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  5 7 9 10 11 14 15
pci_link6: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link7: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link7: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link7: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link8: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  5 7 9 10 11 14 15
pci_link8: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  5 7 9 10 11 14 15
pci_link8: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link9: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  5 7 9 10 11 14 15
pci_link9: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  5 7 9 10 11 14 15
pci_link9: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link10: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  5 7 9 10 11 14 15
pci_link10: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  5 7 9 10 11 14 15
pci_link10: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link11: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    7   N     0  5 7 9 10 11 14 15
pci_link11: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    7   N     0  5 7 9 10 11 14 15
pci_link11: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link12: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  5 7 9 10 11 14 15
pci_link12: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  5 7 9 10 11 14 15
pci_link12: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link13: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link13: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link13: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link14: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link14: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link14: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link15: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link15: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link15: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link16: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link16: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link16: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link17: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  5 7 9 10 11 14 15
pci_link17: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  5 7 9 10 11 14 15
pci_link17: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
pci_link18: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  5 7 9 10 11 14 15
pci_link18: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  5 7 9 10 11 14 15
pci_link18: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  5 7 9 10 11 14 15
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.10.INTA at func 1: 10
ACPI: Found matching pin for 0.10.INTB at func 3: 10
ACPI: Found matching pin for 0.11.INTA at func 0: 11
ACPI: Found matching pin for 0.11.INTB at func 1: 7
ACPI: Found matching pin for 0.20.INTA at func 0: 10
ACPI: Found matching pin for 0.16.INTB at func 1: 11
ACPI: Found matching pin for 0.14.INTA at func 0: 5
ACPI: Found matching pin for 0.5.INTA at func 0: 11
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x10de, dev=0x02f0, revid=0xa2
	bus=0, slot=0, func=0
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02fa, revid=0xa2
	bus=0, slot=0, func=1
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0100, statreg=0x4020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02fe, revid=0xa2
	bus=0, slot=0, func=2
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02f8, revid=0xa2
	bus=0, slot=0, func=3
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02f9, revid=0xa2
	bus=0, slot=0, func=4
	class=05-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02ff, revid=0xa2
	bus=0, slot=0, func=5
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x027f, revid=0xa2
	bus=0, slot=0, func=6
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0100, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x027e, revid=0xa2
	bus=0, slot=0, func=7
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02fc, revid=0xa1
	bus=0, slot=2, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02fd, revid=0xa1
	bus=0, slot=3, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x0244, revid=0xa2
	bus=0, slot=5, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type 1, range 32, base b2000000, size 24, enabled
	map[14]: type 3, range 64, base c0000000, size 28, enabled
	map[1c]: type 1, range 64, base b1000000, size 24, enabled
pcib0: matched entry for 0.5.INTA (src \\_SB_.PCI0.LK3E:0)
pcib0: slot 5 INTA routed to irq 11 via \\_SB_.PCI0.LK3E
found->	vendor=0x10de, dev=0x0270, revid=0xa2
	bus=0, slot=9, func=0
	class=05-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x0260, revid=0xa3
	bus=0, slot=10, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 00001d00, size  7, enabled
found->	vendor=0x10de, dev=0x0264, revid=0xa3
	bus=0, slot=10, func=1
	class=0c-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 00003040, size  6, enabled
	map[24]: type 4, range 32, base 00003000, size  6, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.LSMB:0)
pcib0: slot 10 INTA routed to irq 10 via \\_SB_.PCI0.LSMB
found->	vendor=0x10de, dev=0x0271, revid=0xa3
	bus=0, slot=10, func=3
	class=0b-40-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=b, irq=10
	map[10]: type 1, range 32, base b0040000, size 18, enabled
pcib0: matched entry for 0.10.INTB (src \\_SB_.PCI0.LPMU:0)
pcib0: slot 10 INTB routed to irq 10 via \\_SB_.PCI0.LPMU
found->	vendor=0x10de, dev=0x026d, revid=0xa3
	bus=0, slot=11, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b0004000, size 12, enabled
pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.LUS0:0)
pcib0: slot 11 INTA routed to irq 11 via \\_SB_.PCI0.LUS0
found->	vendor=0x10de, dev=0x026e, revid=0xa3
	bus=0, slot=11, func=1
	class=0c-03-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=b, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b0005000, size  8, enabled
pcib0: matched entry for 0.11.INTB (src \\_SB_.PCI0.LUS2:0)
pcib0: slot 11 INTB routed to irq 7 via \\_SB_.PCI0.LUS2
found->	vendor=0x10de, dev=0x0265, revid=0xf1
	bus=0, slot=13, func=0
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 00003080, size  4, enabled
found->	vendor=0x10de, dev=0x0266, revid=0xf1
	bus=0, slot=14, func=0
	class=01-01-85, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 4 messages, 64 bit
	map[10]: type 4, range 32, base 000030c0, size  3, enabled
	map[14]: type 4, range 32, base 000030b4, size  2, enabled
	map[18]: type 4, range 32, base 000030b8, size  3, enabled
	map[1c]: type 4, range 32, base 000030b0, size  2, enabled
	map[20]: type 4, range 32, base 00003090, size  4, enabled
	map[24]: type 1, range 32, base b0006000, size 12, memory disabled
pcib0: matched entry for 0.14.INTA (src \\_SB_.PCI0.LTID:0)
pcib0: slot 14 INTA routed to irq 5 via \\_SB_.PCI0.LTID
found->	vendor=0x10de, dev=0x026f, revid=0xa2
	bus=0, slot=16, func=0
	class=06-04-01, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns)
found->	vendor=0x10de, dev=0x026c, revid=0xa2
	bus=0, slot=16, func=1
	class=04-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit, vector masks
	map[10]: type 1, range 32, base b0000000, size 14, enabled
pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.LAZA:0)
pcib0: slot 16 INTB routed to irq 11 via \\_SB_.PCI0.LAZA
found->	vendor=0x10de, dev=0x0269, revid=0xa3
	bus=0, slot=20, func=0
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b0008000, size 12, enabled
	map[14]: type 4, range 32, base 000030e0, size  3, enabled
pcib0: matched entry for 0.20.INTA (src \\_SB_.PCI0.LMAC:0)
pcib0: slot 20 INTA routed to irq 10 via \\_SB_.PCI0.LMAC
found->	vendor=0x1022, dev=0x1100, revid=0x00
	bus=0, slot=24, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1101, revid=0x00
	bus=0, slot=24, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1102, revid=0x00
	bus=0, slot=24, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1103, revid=0x00
	bus=0, slot=24, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x4000-0x4fff
pcib1:   memory decode     0xb3000000-0xb31fffff
pcib1:   prefetched decode 0xd0000000-0xd01fffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib2:   secondary bus     3
pcib2:   subordinate bus   3
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0xb3200000-0xb33fffff
pcib2:   prefetched decode 0xfff00000-0xfffff
ACPI: Found matching pin for 3.0.INTA at func 0: 255
pci3: <ACPI PCI bus> on pcib2
pci3: physical bus=3
found->	vendor=0x14e4, dev=0x4311, revid=0x01
	bus=3, slot=0, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message
	map[10]: type 1, range 32, base b3200000, size 14, enabled
pcib2: (null) requested memory range 0xb3200000-0xb3203fff: good
pci3: <network> at device 0.0 (no driver attached)
nvidia0: <GeForce Go 6150> mem 0xb2000000-0xb2ffffff,0xc0000000-0xcfffffff,0xb1000000-0xb1ffffff irq 11 at device 5.0 on pci0
nvidia0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xb2000000
nvidia0: Reserved 0x10000000 bytes for rid 0x14 type 3 at 0xc0000000
nvidia0: Reserved 0x1000000 bytes for rid 0x1c type 3 at 0xb1000000
WITNESS: spin lock ctl.mtx_rm not in order list
nvidia0: [GIANT-LOCKED]
WITNESS: spin lock dev.mtx_rm not in order list
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x1d00-0x1d7f at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
pci0: <processor> at device 10.3 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xb0004000-0xb0004fff irq 11 at device 11.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0004000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xb0005000-0xb00050ff irq 7 at device 11.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xb0005000
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3080-0x308f at device 13.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3080
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
atapci1: <nVidia nForce MCP51 SATA300 controller> port 0x30c0-0x30c7,0x30b4-0x30b7,0x30b8-0x30bf,0x30b0-0x30b3,0x3090-0x309f mem 0xb0006000-0xb0006fff irq 5 at device 14.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3090
atapci1: [MPSAFE]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xb0006000
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x30c0
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x30b4
ata2: SATA connect ready time=0ms
ata2: sata_connect devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x30b8
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x30b0
ata3: SATA connect status=00000000
ata3: [MPSAFE]
pcib3: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pcib3:   secondary bus     7
pcib3:   subordinate bus   7
pcib3:   I/O decode        0xf000-0xfff
pcib3:   memory decode     0xb3400000-0xb34fffff
pcib3:   prefetched decode 0xfff00000-0xfffff
pcib3:   Subtractively decoded bridge.
ACPI: Found matching pin for 7.5.INTA at func 0: 11
ACPI: Found matching pin for 7.5.INTB at func 1: 11
pci7: <ACPI PCI bus> on pcib3
pci7: physical bus=7
found->	vendor=0x1180, dev=0x0832, revid=0x00
	bus=7, slot=5, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b3400000, size 11, enabled
pcib3: (null) requested memory range 0xb3400000-0xb34007ff: good
pcib3: matched entry for 7.5.INTA (src \\_SB_.PCI0.LNK1:0)
pcib3: slot 5 INTA routed to irq 11 via \\_SB_.PCI0.LNK1
found->	vendor=0x1180, dev=0x0822, revid=0x19
	bus=7, slot=5, func=1
	class=08-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b3400800, size  8, enabled
pcib3: (null) requested memory range 0xb3400800-0xb34008ff: good
pcib3: matched entry for 7.5.INTB (src \\_SB_.PCI0.LNK2:0)
pcib3: slot 5 INTB routed to irq 11 via \\_SB_.PCI0.LNK2
found->	vendor=0x1180, dev=0x0843, revid=0x01
	bus=7, slot=5, func=2
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b3400c00, size  8, enabled
pcib3: (null) requested memory range 0xb3400c00-0xb3400cff: good
pcib3: matched entry for 7.5.INTB (src \\_SB_.PCI0.LNK2:0)
pcib3: slot 5 INTB routed to irq 11 via \\_SB_.PCI0.LNK2
found->	vendor=0x1180, dev=0x0592, revid=0x0a
	bus=7, slot=5, func=3
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0102, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b3401000, size  8, enabled
pcib3: (null) requested memory range 0xb3401000-0xb34010ff: good
pcib3: matched entry for 7.5.INTB (src \\_SB_.PCI0.LNK2:0)
pcib3: slot 5 INTB routed to irq 11 via \\_SB_.PCI0.LNK2
found->	vendor=0x1180, dev=0x0852, revid=0x05
	bus=7, slot=5, func=4
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0102, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b3401400, size  8, enabled
pcib3: (null) requested memory range 0xb3401400-0xb34014ff: good
pcib3: matched entry for 7.5.INTB (src \\_SB_.PCI0.LNK2:0)
pcib3: slot 5 INTB routed to irq 11 via \\_SB_.PCI0.LNK2
fwohci0: vendor=1180, dev=832
fwohci0: vendor=1180, dev=832
fwohci0: <1394 Open Host Controller Interface> mem 0xb3400000-0xb34007ff irq 11 at device 5.0 on pci7
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xb3400000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:9f:c0:00:94:9a:b8:00
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:9f:c0:9a:b8:00
fwe0: bpf attached
fwe0: Ethernet address: 02:9f:c0:9a:b8:00
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci7: <base peripheral> at device 5.1 (no driver attached)
pci7: <base peripheral> at device 5.2 (no driver attached)
pci7: <base peripheral> at device 5.3 (no driver attached)
pci7: <base peripheral> at device 5.4 (no driver attached)
pci0: <multimedia> at device 16.1 (no driver attached)
nve0: <NVIDIA nForce MCP13 Networking Adapter> port 0x30e0-0x30e7 mem 0xb0008000-0xb0008fff irq 10 at device 20.0 on pci0
nve0: nvenetlib.o version 1.0-13
nve0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0008000
nve0: Ethernet address 00:16:36:8c:50:85
miibus0: <MII bus> on nve0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nve0: bpf attached
nve0: Ethernet address: 00:16:36:8c:50:85
nve0: [MPSAFE]
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcf800-0xd0fff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: not probed (disabled)
sio1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1607328579 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
rr232x: no controller detected.
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd0: setting PIO4 on nForce MCP51 chip
acd0: <HL-DT-ST DVDRAM GSA-4084N/KQ09> DVDR drive at ata0 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad4: 76319MB <FUJITSU MHV2080BH PL 892C> at ata2-master SATA150
ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: nVidia check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
battery0: battery initialization done, tried 1 times
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22


>How-To-Repeat:
Boot 6.1 Release or 6.2 Beta or 7.0 Current from 10/2006 this HP dv6119us Laptop.

I have not found out if this problem is particular this laptop or HP laptops or to the Turion X2 Chip
>Fix:

>Release-Note:
>Audit-Trail:
>Unformatted:


More information about the freebsd-bugs mailing list