kern/103940: 6.1 not boot on ASUS m2n32-sli motherboard with SATA disk's

Tue Oct 3 07:20:17 PDT 2006

>Number:         103940
>Category:       kern
>Synopsis:       6.1 not boot on ASUS m2n32-sli motherboard with SATA disk's
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Oct 03 14:20:15 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator:     Maksim Portnov
>Release:        FreeBSD 6.1-RELEASE
>Organization:
Sibneft
>Environment:
FreeBSD  6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sun May  7 04:32:43 UTC 2006     root at opus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386

>Description:
I try boot with one or two SATA disk  ad4: 38166MB <Maxtor 6E040T0/NAN51680> [77545/16/63]. But kernel stop boot process on "ad#" drive detect.
Just turn off SATA "ad" devices and restart then kernel boot succes.
My DMESG output: (without SATA "ad" devices)

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Sun May  7 04:32:43 UTC 2006
    root at opus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Sempron(tm) Processor 2800+ (1607.33-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40ff2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=0x19<LAHF,<b3>,CR8>
real memory  = 267321344 (254 MB)
avail memory = 247930880 (236 MB)
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <PCI-PCI bridge> at device 3.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 4.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <display, VGA> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 8.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 9.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 9.1 (no driver attached)
pci0: <memory, RAM> at device 9.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 7 at device 10.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 12.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 5 at device 13.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem 0xfe02c000-0xfe02cfff irq 5 at device 13.1 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb80f mem 0xfe02b000-0xfe02bfff irq 5 at device 13.2 on pci0
ata6: <ATA channel 0> on atapci3
ata7: <ATA channel 1> on atapci3
pcib3: <PCI-PCI bridge> at device 14.0 on pci0
pci3: <PCI bus> on pcib3
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xac00-0xac7f mem 0xfdfff000-0xfdfff07f irq 11 at device 8.0 on pci3
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:10:22:fe:8d:71
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfdffe000-0xfdffe7ff,0xfdff8000-0xfdffbfff irq 5 at device 11.0 on pci3
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:b0:a3:92
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:b0:a3:92
fwe0: Ethernet address: 02:11:d8:b0:a3:92
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci0: <multimedia> at device 14.1 (no driver attached)
pci0: <bridge> at device 16.0 (no driver attached)
pci0: <bridge> at device 17.0 (no driver attached)
pcib4: <PCI-PCI bridge> at device 18.0 on pci0
pci4: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 20.0 on pci0
pci5: <PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 22.0 on pci0
pci6: <PCI bus> on pcib6
pcib7: <PCI-PCI bridge> at device 23.0 on pci0
pci7: <PCI bus> on pcib7
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd07ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
ugen0: Manufac RTL8187_Wireless, rev 1.10/1.00, addr 2
Timecounter "TSC" frequency 1607327772 Hz quality 800
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0a91928
acd0: DVDR <NEC DVD RW ND-4550A/1.06> at ata0-master PIO4
Trying to mount root from ufs:/dev/md0
>How-To-Repeat:
Just plug in SATA HDD to ASUS m2n32-sli motherboard and try boot 6.1 FreeBSD GENERIC.


>Fix:

>Release-Note:
>Audit-Trail:
>Unformatted: