kern/94898: GPRS PCMCIA card cause interrupt storm and config not allocated

Fri Mar 24 07:50:20 UTC 2006

>Number:         94898
>Category:       kern
>Synopsis:       GPRS PCMCIA card cause interrupt storm and config not allocated
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Fri Mar 24 07:50:19 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator:     Kirill Yelizarov
>Release:        FreeBSD 6.1-PRERELEASE
>Organization:
Home
>Environment:
FreeBSD mypc.faberlic.com 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #0: Mon Mar 20 22:48:08 MSK 2006     root at mypc.faberlic.com:/usr/obj/usr/src/sys/MYPC  i386

>Description:
I upgraded FreeBSD 5.4 to 6.0 and got a lot of problems with pcmcia cards. I searched problem reports and found that some changes to PCMCIA were made in Releng_6 so i upgraded system to FreeBSD 6.1-PRERELEASE. Now my ethernet card 3COM 575B is working fine but GPRS PCMCIA card is not working at all. Here is an output:

pccard0: Allocation failed for cfe 1
pccard0: Allocation failed for cfe 5
Interrupt storm detected on "irq9:"; throttling interrupt source
pccard0: No config entry could be allocated

I had no problems with this card on FreeBSD 5.4

#vmstat -i
interrupt                          total       rate
irq0: clk                        2671182        999
irq1: atkbd0                        1296          0
irq8: rtc                         341865        127
irq9: pcm0 cbb0++                   3834          1
irq13: npx0                            1          0
irq14: ata0                        64938         24
Total                            3083116       1153

#dmesg
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #0: Mon Mar 20 22:48:08 MSK 2006
    root at mypc.faberlic.com:/usr/obj/usr/src/sys/MYPC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (496.31-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR,SSE>
real memory  = 201261056 (191 MB)
avail memory = 187416576 (178 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcm0: <Intel 440MX> port 0xf800-0xf8ff,0xfc40-0xfc7f irq 9 at device 0.1 on pci0
pcm0: <Cirrus Logic CS4299 AC97 Codec>
pci0: <old, non-VGA display device> at device 0.2 (no driver attached)
pci0: <display, VGA> at device 2.0 (no driver attached)
cbb0: <RF5C475 PCI-CardBus Bridge> irq 9 at device 3.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37
6,0xfcf0-0xfcff at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82443MX USB controller> port 0xfcc0-0xfcdf irq 10 at device 7.2 on
 pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82443MX USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.3 (no driver attached)
ltmdm0: <Lucent Winmodem> port 0xfce8-0xfcef,0xf400-0xf4ff mem 0xfedffc00-0xfedf
fcff irq 10 at device 9.0 on pci0
ltmdm0: [GIANT-LOCKED]
ltmdm0: type Virtual 16550A

acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xdc000-0xdffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 496310499 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, defau
lt to deny, logging limited to 1000 packets/entry by default
cardbus0: Resource not specified in CIS: id=14, size=80
cardbus0: Resource not specified in CIS: id=18, size=80
xl0: <3Com 3c575B Fast Etherlink XL> port 0x2080-0x20ff mem 0x88000000-0x8800007
f,0x88001000-0x8800107f irq 9 at device 0.0 on cardbus0
miibus0: <MII bus> on xl0
tdkphy0: <TDK 78Q2120 media interface> on miibus0
tdkphy0:  10baseT, 100baseTX, auto
xl0: Ethernet address: 00:50:da:d2:74:cb
acpi_acadbattery0: battery initialization start
battery1: battery initialization start
0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization done, tried 1 times
acd0: DVDR <MATSHITADVD-RAM UJ-822S/1.00> at ata0-master UDMA33
ad1: 57231MB <Seagate ST960822A 3.02> at ata0-slave UDMA33
Trying to mount root from ufs:/dev/ad1s2a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
/usr: mount pending error: blocks 4 files 0
WARNING: /var was not properly dismounted
battery1: battery initialization failed, giving up
pccard0: Allocation failed for cfe 1
pccard0: Allocation failed for cfe 5
Interrupt storm detected on "irq9:"; throttling interrupt source
pccard0: No config entry could be allocated.

>How-To-Repeat:
Install FreeBSD 6.1-PRERELEASE on a notebook where pcmcia slot irq is shared with acpi and/or sound
Insert PCMCIA GPRS/GSM Wireless Modem

>Fix:
Not known yet
>Release-Note:
>Audit-Trail:
>Unformatted: