kern/92439: AD1: detached [g_vfs_done]

Ricardo A. Reis ricardo.areis at gmail.com
Fri Jan 27 16:30:06 PST 2006


>Number:         92439
>Category:       kern
>Synopsis:       AD1: detached [g_vfs_done]
>Confidential:   no
>Severity:       critical
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Sat Jan 28 00:30:04 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator:     Ricardo A. Reis
>Release:        7-CURRENT
>Organization:
UNIFESP
>Environment:
FreeBSD myfreebsd.homeunix.org 7.0-CURRENT FreeBSD 7.0-CURRENT #4: Fri Jan 27 10:27:01 BRST 2006     root at myfreebsd.homeunix.org:/usr/src/sys/i386/compile/CURRENT  i386

>Description:
              After upgrade my workstation (K6-2 500 + EPOX MPV3G) with last cvsup 01/26/2006, the ad1 is marked detached this station use generic kernel with ULE  

ad1: detached
acd0: TIMEOUT - READ_CD retrying (1 retry left)
acd0: timeout waiting for ATAPI ready
acd0: error issuing ATA PACKET command
acd0: timeout waiting for ATAPI ready
acd0: error issuing ATA PACKET command
acd0: TIMEOUT - READ_CD retrying (1 retry left)
g_vfs_done():ad1s3e[READ(offset=6160384, length=2048)]error = 6
g_vfs_done():ad1s3e[READ(offset=6160384, length=2048)]error = 6
g_vfs_done():ad1s3e[READ(offset=6160384, length=2048)]error = 6
g_vfs_done():ad1s3e[READ(offset=6160384, length=2048)]error = 6
g_vfs_done():ad1s3e[READ(offset=6160384, length=2048)]error = 6
g_vfs_done():ad1s3e[READ(offset=6160384, length=2048)]error = 6
g_vfs_done():ad1s1[READ(offset=17408, length=4096)]error = 6
deget(): pcbmap returned 6


ls -la /dev/ad[TAB] 
ad2%     ad2s1%   ad2s1a%  ad2s1b%  ad2s1c%  ad2s1d%

full dmesg

----------
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #4: Fri Jan 27 10:27:01 BRST 2006
    root at myfreebsd.homeunix.org:/usr/src/sys/i386/compile/CURRENT
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD-K6(tm) 3D processor (501.14-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x58c  Stepping = 12
  Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
  AMD Features=0x80000800<SYSCALL,3DNow>
real memory  = 201261056 (191 MB)
avail memory = 187400192 (178 MB)
K6-family MTRR support enabled (2 registers)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 8 Entries> on motherboard
$PIR: BIOS IRQ 10 for 0.7.INTD does not match link 0x5 irq 9
pci0: <PCI bus> on pcib0
agp0: <VIA 82C597 (Apollo VP3) host to PCI bridge> on hostb0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
$PIR: ROUTE_INTERRUPT failed.
vgapci0: <VGA-compatible display> mem 0xe0000000-0xe3ffffff irq 11 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596B UDMA66 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, HOST-PCI> at device 7.3 (no driver attached)
pcm0: <AudioPCI ES1370> port 0xd800-0xd83f irq 5 at device 9.0 on pci0
pcm0: es1370_wrcodec: timed out
pcm0: es1370_wrcodec: timed out
pcm0: es1370_wrcodec: timed out
pcm0: es1370_wrcodec: timed out
pcm0: <Playback: DAC1,DAC2 / Record: ADC>
rl0: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem 0xec000000-0xec0000ff irq 9 at device 10.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:08:54:2f:f1:a3
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xe000-0xe0ff mem 0xec001000-0xec0010ff irq 9 at device 11.0 on pci0
miibus1: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:40:f4:5f:1c:1b
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc9fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 501138824 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDRW <HL-DT-ST GCE-8523B/1.01> at ata0-master UDMA33
ad1: 39205MB <Maxtor 2F040J0 VAM51JJ0> at ata0-slave UDMA66
ad2: 14324MB <QUANTUM FIREBALLlct10 15 A03.0900> at ata1-master UDMA66
Trying to mount root from ufs:/dev/ad2s1a
WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
----------------

FSTAB

grep ad1 /etc/fstab 

/dev/ad1s3e             /mnt/backup             ufs     rw              2       2
/dev/ad1s1              /mnt/win                msdosfs ro              0       0

mount

/dev/ad2s1a on / (ufs, local)
devfs on /dev (devfs, local)
/dev/ad1s3e on /mnt/backup (ufs, local, soft-updates)
/dev/ad1s1 on /mnt/win (msdosfs, local, read-only)
/dev/ad2s1d on /usr (ufs, local, soft-updates)



>How-To-Repeat:
              
>Fix:
              
>Release-Note:
>Audit-Trail:
>Unformatted:


More information about the freebsd-bugs mailing list