Dell PERC5 (SAS 5) controller boot flr
Thomas Kindig
tkindig at wsfcu.org
Thu Dec 21 09:22:18 PST 2006
Yes, sorry for the limited information. I am still building my skill-set.
boot -s fails at the same point. Safe mode gets me to a frozen login
prompt. I see the DRAK 5 Virtual Media drives listed during the boot,
but I am not sure how to get a trace of the boot sequence to supply
here, given the fact that I never mount a file system.
Dell SAS 5 Host Bus Adaptor BIOS
MPTBIOS - 6.06.00.02 2006.04.05
LSI Logic Corp.
HBA ID LUN VENDOR PRODUCT REVISION CAPACITY
____ ___ ___ ___________ ___________ __________ ___________
0 0 0 ATA ST3160812AS J 152587 MB
0 0 0 DP BACKPLANE 1.00
0 LSILogic SAS1860-IT 8.06.48.00
Dell Corp. MPT boot ROM sucessfully installed!
[...]
mpt0: <LSILogic SAS/SATA Adaptor> port 0xec00-0xecff msm
0xfc000-0xfc4fffff,0xfc4effff irq 64 at device 0.0 on pc12
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.5.12.8
[...]
ums0: Dell DRAC5, rev 1.18/0,00 not supported
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
umass0: DELL INC. DRAC5 VIRTUAL MEDIA, rev 2.00/0.00, addr 4
umass1: DELL INC. DRAC5 VIRTUAL MEDIA, rev 2.00/0.00, addr 4
[...]
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
unknown: timeout waiting for read DRQ
bce0: link state changed to DOWN
bce1: link state changed to DOWN
acd0: CDRW <HL-DT-STCD-RW/DVD-ROM GCC-4244N/B101> at ata0-master UDMA33
(Sorry for the truncated details, but I shot a video and typed in the
parts that seem most relevant).
Dropping to boot prompt I list the loaded modules and see
[...] mpt_raid.1 mpt.1 mpt_cam.1 mpt_core.1 [...]
For grins, loaded mfi, boot -s, same result.
At 09:00 AM 12/21/2006, you wrote:
>No bug report known. This is a bit sparse. It's not even sure that
>this is mpt related. Does a boot -s succeed?
>
>
>On Thu, 21 Dec 2006, Thomas Kindig wrote:
>
>>FreeBSD 6.2rc1 installer is able to access controller/drive for
>>purposes of install, but cannot access installed system following reboot.
>>
>>The system is a DELL PowerEdge 1950 with a SAS 5 controller, single
>>180G ATA HD.
>>
>>Dell SAS 5 Host Bus Adaptor BIOS
>>MPTBIOS - 6.06.00.02 2006.04.05
>>LSI Logic
>>
>>Following a successful install and reboot the system fails to come
>>up. The boot process ends with the following (very slowly, so that
>>I could spell it all out):
>>
>>mpt0: mpt_cam_event: 0x16
>>mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
>>unknown: timeout waiting for read DRQ
>>bce0: link state changed to DOWN
>>bce1: link state changed to DOWN
>>acd0: CDRW <HL-DT-STCD-RW/DVD-ROM GCC-4244N/B101> at ata0-master UDMA33
>>
>>Is there a bug report on this? Any prognosis for a fix before 6.2-RELEASE?
>>
>>_______________________________________________
>>freebsd-bugs at freebsd.org mailing list
>>http://lists.freebsd.org/mailman/listinfo/freebsd-bugs
>>To unsubscribe, send any mail to "freebsd-bugs-unsubscribe at freebsd.org"
'Hope this helps,
Thomas
WSFCU Help Desk
505-647-4578
A friendly reminder to our members: you should not use regular email
for confidential information. The Credit Union will not use regular
email for sensitive information. Your privacy is very important to
us. Help us protect your privacy by using secure channels whenever
you need to exchange confidential information. See
<http://www.wsfcu.org/index.asp?p=h&a=124>Email and your
<http://www.wsfcu.org/index.asp?p=h&a=124>privacy for more information.
More information about the freebsd-bugs
mailing list