kern/106832: USB HP printer is not detected by kernel when ACPI enabled.

[fred]

The following reply was made to PR kern/106832; it has been noted by GNATS.

From: fred <fredantispam at free.fr>
To: bug-followup at FreeBSD.org
Cc:  
Subject: Re: kern/106832: USB HP printer is not detected by kernel when ACPI
 enabled.
Date: Sun, 17 Dec 2006 13:27:16 +0100

 Hi,
 
 Please consider the following output of dmesg, with USB_DEBUG enbled.
 
 Thx.
 
 Copyright (c) 1992-2006 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
          The Regents of the University of California. All rights reserved.
 FreeBSD 6.1-RELEASE #0: Sun Dec 17 12:50:00 CET 2006
      root at marsu:/usr/src/sys/i386/compile/FREEBSD_61
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: Intel(R) Pentium(R) D CPU 3.00GHz (3000.12-MHz 686-class CPU)
    Origin = "GenuineIntel"  Id = 0xf64  Stepping = 4
  
 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUS
 H,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
    Features2=0xe4bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,CNTX-ID,CX16,<b14>,<b15>>
    AMD Features=0x20100000<NX,LM>
    AMD Features2=0x1<LAHF>
    Cores per package: 2
 real memory  = 2952724480 (2815 MB)
 avail memory = 2883387392 (2749 MB)
 ACPI APIC Table: <Nvidia AWRDACPI>
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
   cpu0 (BSP): APIC ID:  0
   cpu1 (AP): APIC ID:  1
 ioapic0: Changing APIC ID to 4
 ioapic0 <Version 1.1> irqs 0-23 on motherboard
 acpi0: <Nvidia AWRDACPI> on motherboard
 acpi_bus_number: can't get _ADR
 acpi_bus_number: can't get _ADR
 acpi0: Power Button (fixed)
 acpi_bus_number: can't get _ADR
 acpi_bus_number: can't get _ADR
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
 cpu0: <ACPI CPU> on acpi0
 cpu1: <ACPI CPU> on acpi0
 acpi_button0: <Power Button> on acpi0
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pci0: <ACPI PCI bus> on pcib0
 pci0: <memory, RAM> at device 0.1 (no driver attached)
 pci0: <memory, RAM> at device 0.2 (no driver attached)
 pci0: <memory, RAM> at device 0.3 (no driver attached)
 pci0: <memory, RAM> at device 0.4 (no driver attached)
 pci0: <memory, RAM> at device 1.0 (no driver attached)
 pci0: <memory, RAM> at device 1.1 (no driver attached)
 pci0: <memory, RAM> at device 1.2 (no driver attached)
 pci0: <memory, RAM> at device 1.3 (no driver attached)
 pci0: <memory, RAM> at device 1.4 (no driver attached)
 pci0: <memory, RAM> at device 1.5 (no driver attached)
 pci0: <memory, RAM> at device 1.6 (no driver attached)
 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
 pci1: <ACPI PCI bus> on pcib1
 nvidia0: <GeForce 6800 Series GPU> mem 
 0xd3000000-0xd3ffffff,0xb0000000-0xbfffffff,0xd4000000-0xd4ff
 ffff irq 16 at device 0.0 on pci1
 nvidia0: [GIANT-LOCKED]
 pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
 pci2: <ACPI PCI bus> on pcib2
 nvidia1: <GeForce 6800 Series GPU> mem 
 0xd0000000-0xd0ffffff,0xc0000000-0xcfffffff,0xd1000000-0xd1ff
 ffff irq 16 at device 0.0 on pci2
 nvidia1: [GIANT-LOCKED]
 pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
 pci3: <ACPI PCI bus> on pcib3
 pci3: <mass storage> at device 0.0 (no driver attached)
 pci0: <memory, RAM> at device 9.0 (no driver attached)
 isab0: <PCI-ISA bridge> at device 10.0 on pci0
 isa0: <ISA bus> on isab0
 ichsmb0: <SMBus controller> port 
 0xe400-0xe41f,0x5000-0x503f,0x5100-0x513f irq 20 at device 10.1 on
 pci0
 ichsmb0: [GIANT-LOCKED]
 smbus0: <System Management Bus> on ichsmb0
 smb0: <SMBus generic I/O> on smbus0
 ohci0: <OHCI (generic) USB controller> mem 0xd9005000-0xd9005fff irq 21 
 at device 11.0 on pci0
 ohci0: [GIANT-LOCKED]
 usb0: OHCI version 1.0, legacy support
 usb0: SMM does not respond, resetting
 usb0: <OHCI (generic) USB controller> on ohci0
 usb0: USB revision 1.0
 usbd_get_string: getting lang failed, using 0
 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 5 ports with 5 removable, self powered
 ohci1: <OHCI (generic) USB controller> mem 0xd9000000-0xd9000fff irq 22 
 at device 11.1 on pci0
 ohci1: [GIANT-LOCKED]
 usb1: OHCI version 1.0, legacy support
 usb1: SMM does not respond, resetting
 usb1: <OHCI (generic) USB controller> on ohci1
 usb1: USB revision 1.0
 usbd_get_string: getting lang failed, using 0
 uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 5 ports with 5 removable, self powered
 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd9001000-0xd90010ff irq 
 23 at device 11.2 on pci0
 ehci0: [GIANT-LOCKED]
 usb2: EHCI version 1.0
 usb2: companion controllers, 4 ports each: usb0 usb1
 usb2: <EHCI (generic) USB 2.0 controller> on ehci0
 usb2: USB revision 2.0
 uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub2: 10 ports with 10 removable, self powered
 nve0: <NVIDIA nForce MCP11 Networking Adapter> port 0xb800-0xb807 mem 
 0xd9002000-0xd9002fff irq 21 a
 t device 14.0 on pci0
 nve0: Ethernet address 00:13:d4:e0:0b:ba
 miibus0: <MII bus> on nve0
 ukphy0: <Generic IEEE 802.3u media interface> on miibus0
 ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
 1000baseT-FDX, auto
 nve0: Ethernet address: 00:13:d4:e0:0b:ba
 atapci0: <nVidia nForce MCP UDMA133 controller> port 
 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf0
 0f at device 15.0 on pci0
 ata0: <ATA channel 0> on atapci0
 ata1: <ATA channel 1> on atapci0
 atapci1: <nVidia nForce MCP SATA150 controller> port 
 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73
 ,0xcc00-0xcc0f mem 0xd9003000-0xd9003fff irq 22 at device 16.0 on pci0
 ata2: <ATA channel 0> on atapci1
 ata3: <ATA channel 1> on atapci1
 atapci2: <nVidia nForce MCP SATA150 controller> port 
 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63
 ,0xe000-0xe00f mem 0xd9004000-0xd9004fff irq 23 at device 17.0 on pci0
 ata4: <ATA channel 0> on atapci2
 ata5: <ATA channel 1> on atapci2
 pcib4: <ACPI PCI-PCI bridge> at device 18.0 on pci0
 pci4: <ACPI PCI bus> on pcib4
 pci4: <serial bus, FireWire> at device 11.0 (no driver attached)
 em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 
 0xa000-0xa03f mem 0xd8000000-0xd80
 1ffff irq 19 at device 12.0 on pci4
 em0: Ethernet address: 00:13:d4:e0:01:23
 pcm0: <nVidia nForce 4 MCP> port 0xe800-0xe8ff,0xec00-0xecff mem 
 0xd9006000-0xd9006fff irq 20 at dev
 ice 19.0 on pci0
 pcm0: <Avance Logic ALC850 AC97 Codec>
 acpi_tz0: <Thermal Zone> on acpi0
 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 atkbd0: [GIANT-LOCKED]
 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 psm0: [GIANT-LOCKED]
 psm0: model MouseMan+, device ID 0
 orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 usb_new_device: set address 2 failed - trying a port reset
 usb_new_device: set address 2 failed - trying a port reset
 usb_new_device: set address 2 failed - trying a port reset
 usb_new_device: set address 2 failed
 uhub_explore: usb_new_device failed, error=SET_ADDR_FAILED
 uhub0: device problem (SET_ADDR_FAILED), disabling port 1
 usb_new_device: set address 2 failed - trying a port reset
 usb_new_device: set address 2 failed - trying a port reset
 usb_new_device: set address 2 failed - trying a port reset
 usb_new_device: set address 2 failed
 uhub_explore: usb_new_device failed, error=SET_ADDR_FAILED
 uhub0: device problem (SET_ADDR_FAILED), disabling port 2
 Timecounters tick every 1.000 msec
 acd0: CDRW <ASUS CRW-5232A4/1.00> at ata1-master UDMA33
 acd1: DVDR <ASUS DRW-1608P3S/1.19> at ata1-slave UDMA66
 ad4: 238475MB <Maxtor 6L250S0 BACE1G10> at ata2-master SATA150
 ad6: 239372MB <Maxtor 6V250F0 VA111900> at ata3-master SATA300
 ad8: 239372MB <Maxtor 6L250S0 BACE1G20> at ata4-master SATA150
 ad10: 239372MB <Maxtor 6L250S0 BANC1G10> at ata5-master SATA150
 SMP: AP CPU #1 Launched!
 
 -- 
 Fred.