kern/102210: [ata] reboot system makes rebuilding array ready (ICH7)

Yoichi NAKAYAMA yoichi at
Fri Aug 18 02:20:16 UTC 2006

>Number:         102210
>Category:       kern
>Synopsis:       [ata] reboot system makes rebuilding array ready (ICH7)
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    freebsd-bugs
>State:          open
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Fri Aug 18 02:20:15 GMT 2006
>Originator:     Yoichi NAKAYAMA
>Release:        7-current
FreeBSD suigei.local-net 7.0-CURRENT FreeBSD 7.0-CURRENT #11: Thu Aug 17 23:51:38 JST 2006     yoichi at suigei.local-net:/usr/obj/usr/src/sys/GENERIC_DEBUG  i386

I have raid array with ICH7.
Reboot system when RAID1 volume is under rebuilding,
then the volume, althogh it is out of sync, is shown as READY:
 # atacontrol status ar0
 ar0: ATA RAID1 subdisks: ad10 ad14 status: READY
while "Intel(R) Matrix Strage Manager option ROM v5.7.0.1005 ICH7MR"
shows that the status of the volume is "Rebuild".
# When I boot Windows XP, it does continue rebuilding process.

related part of dmesg:
 atapci2: <Intel ICH7M SATA300 controller> port 0xe080-0xe087,0xe000-0xe003,0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd80f mem 0xffa37800-0xffa37bff irq 19 at device 31.2 on pci0
 ad10: 239372MB <Maxtor 7V250F0 VA111630> at ata5-master SATA150
 ad14: 239372MB <Maxtor 7V250F0 VA111630> at ata7-master SATA150
 ar0: disk0 READY (master) using ad10 at ata5-master
 ar0: disk1 READY (mirror) using ad14 at ata7-master

atacontrol detach ata7
atacontrol attach ata7
atacontrol addspare ar0 ad14
atacontrol rebuild ar0



More information about the freebsd-bugs mailing list