kern/81634: ICH5R SATA driver non-functional, install from CD fails w/ no HDDs found

Erik Power big.laser at gmail.com
Tue May 31 17:50:06 PDT 2005


The following reply was made to PR kern/81634; it has been noted by GNATS.

From: "Erik Power" <big.laser at gmail.com>
To: "'Erik Power'" <big.laser at gmail.com>,
	<bug-followup at FreeBSD.org>
Cc:  
Subject: RE: Re: kern/81634: ICH5R SATA driver non-functional, install from CD fails w/ no HDDs found
Date: Tue, 31 May 2005 20:46:57 -0400

 OK, after compiling a custom kernel, the timeout issues have vanished. =
 It
 appears that the generic kernel included with the 5.4-RELEASE amd64 =
 distro
 doesn't like the ICH5R controller, but there is a usable workaround in
 simply booting with safe mode until you get your kernel compiled. =
 Everything
 is purring like a lion... I'm happy as a clam, now...
 
 Erik Power
 University of Michigan
 Center for Ultrafast Optical Science
 2200 Bonisteel Blvd.
 2102 IST Building
 Ann Arbor, MI 48109
 Phone: (734) 936-0473
 Fax: (734) 763-4876
 
 > -----Original Message-----
 > From: Erik Power [mailto:big.laser at gmail.com]=20
 > Sent: Tuesday, May 31, 2005 6:11 PM
 > To: 'bug-followup at FreeBSD.org'
 > Subject: Re: kern/81634: ICH5R SATA driver non-functional,=20
 > install from CD fails w/ no HDDs found
 >=20
 >=20
 > An additional follow-up, choosing the safe-mode boot option=20
 > allowed me to see the HDD and complete the install of=20
 > 5.4-RELEASE amd64. To further help your debugging, when=20
 > attempting the normal boot sequence for installation, the=20
 > ATA_IDENTIFY and ATAPI_IDENTIFY commands were timing out on=20
 > the hard drive and CD drive, respectively. The hard drive is=20
 > SATA, the CD drive is on an old parallel ATA interface, and=20
 > both drives are masters on their respective channels. As long=20
 > as I choose a safe-mode boot, I have no problems getting the=20
 > system to run (although the drive performace is seriously=20
 > degraded). I'll try messing around with atacontrol to see if=20
 > I can fix the problem with a forced ata config.
 >=20
 > Erik Power
 > University of Michigan
 > Center for Ultrafast Optical Science
 > 2200 Bonisteel Blvd.
 > 2102 IST Building
 > Ann Arbor, MI 48109
 > Phone: (734) 936-0473
 > Fax: (734) 763-4876
 >=20
 


More information about the freebsd-bugs mailing list