misc/81597: My POS-460 system based on a Western Digital LPM/LPX layout hangs after reboot

Aron Cristian criller2 at yahoo.com
Sat May 28 12:40:02 PDT 2005


>Number:         81597
>Category:       misc
>Synopsis:       My POS-460 system based on a Western Digital LPM/LPX layout hangs after reboot
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Sat May 28 19:40:01 GMT 2005
>Closed-Date:
>Last-Modified:
>Originator:     Aron Cristian
>Release:        5.3 - Stable
>Organization:
student
>Environment:
FreeBSD dio 5.3-RELEASE FreeBSD 5.3-RELEASE #0: Fri Nov  5 04:19:18 UTC 2004     root at harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386

>Description:
The system works fine until i try to reboot it.After that it gets to displaying "isa0: <ISA bus> on motherboard" and hangs.
dmesg displays the following:

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Fri Nov  5 04:19:18 UTC 2004
    root at harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: i486  (486-class CPU)
  Origin = "GenuineIntel"  Id = 0x490  Stepping = 0
  Features=0xb<FPU,VME,PSE>
real memory  = 33554432 (32 MB)
avail memory = 23392256 (22 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <display, VGA> at device 3.0 (no driver attached)
cpu0 on motherboard
isa0: <ISA bus> on motherboard
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata1 at port 0x376,0x170-0x177 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ed0 at port 0x340-0x35f iomem 0xd8000-0xdbfff irq 10 on isa0
ed0: [GIANT-LOCKED]
ed0: Ethernet address: 00:40:95:96:39:f6
ed0: if_start running deferred for Giant
type WD8013EBT (16 bit) 
ed1 at port 0x300-0x31f iomem 0xdc000-0xdffff irq 5 on isa0
ed1: [GIANT-LOCKED]
ed1: Ethernet address: 00:d0:c9:03:70:13
ed1: if_start running deferred for Giant
type NE2000 (16 bit) 
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0600> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
Timecounters tick every 10.000 msec
ad0: 1221MB <Seagate Technology 1275MB - ST31276A/1.36> [2482/16/63] at ata0-master PIO4
Mounting root from ufs:/dev/ad0s1a
IP Filter: v3.4.35 initialized.  Default = pass all, Logging = enabled

>How-To-Repeat:
Install FreeBSD 5.3 on a POS460 system      
>Fix:
      
>Release-Note:
>Audit-Trail:
>Unformatted:


More information about the freebsd-bugs mailing list