kern/71638: Radeon 9200 SE with Xorg 6.7 and DRI 5.0.2 crashes 5.3-BETA4

[Antoine Brodin]

The following reply was made to PR kern/71638; it has been noted by GNATS.

From: Antoine Brodin <antoine.brodin at laposte.net>
To: freebsd-gnats-submit at FreeBSD.org, A.J.Caines at halplant.com
Cc:  
Subject: Re: kern/71638: Radeon 9200 SE with Xorg 6.7 and DRI 5.0.2 crashes
 5.3-BETA4
Date: Thu, 23 Sep 2004 16:33:31 +0200

 Similar problem here with 6.0-CURRENT from today (never tested DRI
 before).
 Without DRI, everything is ok.
 With DRI enabled, Xorg starts, brings a garbled previous root window up
 and I can't switch back to the virtual terminals or kill Xorg with
 Ctrl-Alt-Backspace.
 I can still log in via ssh and kill Xorg.
 
 Xorg version :
 
 xorg-server-6.7.0_8
 dri-5.0.2,1 and dri-6.1.p20040507,1
 
 Hardware :
 
 Graphic card : ASUS Radeon 9200SE 128MB AGP
 Mobo : ASUS A7N8X-E DELUXE
 Chipset : NVIDIA nForce2
 
 From pciconf :
 
 agp0 at pci0:0:0:  class=0x060000 card=0x80ac1043 chip=0x01e010de rev=0xc1 hdr=0x00
     vendor   = 'NVIDIA Corporation'
     device   = 'nForce2 AGP Controller'
     class    = bridge
     subclass = HOST-PCI
 
 drm0 at pci3:0:0:  class=0x030000 card=0xc0061043 chip=0x59641002 rev=0x01 hdr=0x00
     vendor   = 'ATI Technologies Inc.'
     device   = 'Radeon 9200 SE Series (RV280)'
     class    = display
     subclass = VGA
 
 none8 at pci3:0:1: class=0x038000 card=0xc0071043 chip=0x5d441002 rev=0x01 hdr=0x00
     vendor   = 'ATI Technologies Inc.'
     device   = 'Radeon 9200 SE Series - Secondary (RV280)'
     class    = display
 
 From dmesg :
 
 ...
 agp0: <NVIDIA nForce2 AGP Controller> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
 agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xd0000000
 agp0: allocating GATT for aperture of size 128M
 ...
 drm0: <ATI Radeon RV280 9200 SE> port 0xc000-0xc0ff mem 0xea000000-0xea00ffff,0xd8000000-0xdfffffff irq 19 at device 0.0 on pci3
 info: [drm] AGP at 0xd0000000 128MB
 info: [drm] Initialized radeon 1.11.0 20020828 on minor 0
 pci3: <display> at device 0.1 (no driver attached)
 ...
 agp0: Setting AGP v3 mode 4
 info: [drm] Loading R200 Microcode
 ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
 drm0: [MPSAFE]
 
 My Xorg.0.log is quite big so I don't send it, I can provide it if you
 want.