ia64/72128: 5.3-beta6 doesn't boot
Arun Sharma
arun.sharma at intel.com
Mon Oct 18 12:36:59 PDT 2004
On 10/18/2004 4:34 AM, Jens Axboe wrote:
> On Sat, Oct 09 2004, Jens Axboe wrote:
>> On Fri, Oct 08 2004, Arun Sharma wrote:
>> > On 10/8/2004 2:24 PM, Arun Sharma wrote:
>> > >On 10/7/2004 11:02 PM, Mark Linimon wrote:
>> > >
>> > >>This may be processor-specific.
>> > >>
>> > >>http://www.freebsd.org/cgi/query-pr.cgi?pr=72128
>> > >
>> > >
>> > >I just tested that the 5.3-beta7 works fine on a 4 way Tiger with 1GB
>> > >RAM. I don't think there have been critical bug fixes between beta6 and
>> > >beta7 that affect the tiger. Also, on a 4GB machine, FreeBSD ignores RAM
>> > >above 1GB.
>> >
>> > I meant to say FreeBSD ignores RAM above 4GB physical. So depending on your
>> > memory map, this may or may not be a problem.
>>
>> I can verify my memory map in Linux, I'll send it in on the next boot.
>
> Sorry about the delay, was away on business.
>
> These are the only comments that Linux gives about the memory layout:
>
I can't reproduce your problem on a tiger4 with 4GB RAM. Attached is the memory map obtained via memmap EFI command and the dmesg.
-Arun
-------------- next part --------------
fs1:\> memmap
Type Start End # Pages Attributes
BS_data 0000000000000000-0000000000000FFF 0000000000000001 0000000000000009
available 0000000000001000-0000000000006FFF 0000000000000006 0000000000000009
BS_data 0000000000007000-0000000000008FFF 0000000000000002 0000000000000009
available 0000000000009000-0000000000081FFF 0000000000000079 0000000000000009
RT_data 0000000000082000-0000000000083FFF 0000000000000002 8000000000000009
available 0000000000084000-0000000000084FFF 0000000000000001 0000000000000009
BS_data 0000000000085000-000000000009FFFF 000000000000001B 0000000000000009
RT_code 00000000000C0000-00000000000FFFFF 0000000000000040 8000000000000009
available 0000000000100000-000000000FF7FFFF 000000000000FE80 000000000000000B
BS_data 000000000FF80000-000000000FFFFFFF 0000000000000080 000000000000000B
available 0000000010000000-000000007D8FFFFF 000000000006D900 000000000000000B
BS_code 000000007D900000-000000007F97FFFF 0000000000002080 000000000000000B
available 000000007F980000-000000007F9FFFFF 0000000000000080 000000000000000B
RT_code 000000007FA00000-000000007FDFFFFF 0000000000000400 8000000000000009
PAL_code 000000007FE00000-000000007FE3FFFF 0000000000000040 8000000000000009
RT_code 000000007FE40000-000000007FE95FFF 0000000000000056 8000000000000009
available 000000007FE96000-000000007FF21FFF 000000000000008C 000000000000000B
BS_data 000000007FF22000-000000007FF2FFFF 000000000000000E 000000000000000B
RT_data 000000007FF30000-000000007FFFFFFF 00000000000000D0 8000000000000009
MemMapIO 00000000FE000000-00000000FEFFFFFF 0000000000001000 0000000000000001
RT_data 00000000FF000000-00000000FFFFFFFF 0000000000001000 8000000000000001
available 0000000180000000-00000001FEFAFFFF 000000000007EFB0 000000000000000B
LoaderData 00000001FEFB0000-00000001FEFB7FFF 0000000000000008 000000000000000B
LoaderCode 00000001FEFB8000-00000001FEFFDFFF 0000000000000046 000000000000000B
available 00000001FEFFE000-00000001FF453FFF 0000000000000456 000000000000000B
BS_data 00000001FF454000-00000001FF800FFF 00000000000003AD 000000000000000B
available 00000001FF801000-00000001FF883FFF 0000000000000083 000000000000000B
BS_data 00000001FF884000-00000001FF885FFF 0000000000000002 000000000000000B
available 00000001FF886000-00000001FF887FFF 0000000000000002 000000000000000B
BS_data 00000001FF888000-00000001FF9F9FFF 0000000000000172 000000000000000B
available 00000001FF9FA000-00000001FF9FAFFF 0000000000000001 000000000000000B
BS_data 00000001FF9FB000-00000001FF9FDFFF 0000000000000003 000000000000000B
available 00000001FF9FE000-00000001FFD83FFF 0000000000000386 000000000000000B
BS_code 00000001FFD84000-00000001FFDFDFFF 000000000000007A 000000000000000B
available 00000001FFDFE000-00000001FFE11FFF 0000000000000014 000000000000000B
RT_code 00000001FFE12000-00000001FFE7DFFF 000000000000006C 8000000000000009
available 00000001FFE7E000-00000001FFFB9FFF 000000000000013C 000000000000000B
RT_data 00000001FFFBA000-00000001FFFFFFFF 0000000000000046 8000000000000009
MemMapIO 00000FFFF8000000-00000FFFFBFFFFFF 0000000000004000 8000000000000001
MemPortIO 00000FFFFC000000-00000FFFFFFFFFFF 0000000000004000 8000000000000001
LoaderCode: 70 Pages (286,720)
LoaderData: 8 Pages (32,768)
BS_code : 8,442 Pages (34,578,432)
BS_data : 1,488 Pages (6,094,848)
RT_code : 1,282 Pages (5,251,072)
RT_data : 4,376 Pages (17,924,096)
available : 1,036,910 Pages (4,247,183,360)
MemMapIO : 20,480 Pages (83,886,080)
MemPortIO : 16,384 Pages (67,108,864)
PAL_code : 64 Pages (262,144)
Total Memory: 4,111 MB (4,311,613,440) Bytes
fs1:\>
OK boot -h -v
Entering /boot/kernel/kernel at 0xe000000004058000...
Skipping memory chunk start 0x180000000
Skipping memory chunk start 0x1feffe000
Skipping memory chunk start 0x1ff801000
Skipping memory chunk start 0x1ff886000
Skipping memory chunk start 0x1ff9fe000
Skipping memory chunk start 0x1ffdfe000
Skipping memory chunk start 0x1ffe7e000
ptc.e base=0x0, count1=1, count2=1, stride1=0x0, stride2=0x0
Processor supports 24 Region ID bits
Trying VHPT size 0x800000
Putting VHPT at 0x800000
Splitting [0x100000-0x4000000]
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA7 #0: Sun Oct 3 07:16:23 UTC 2004
root at pluto2.freebsd.org:/usr/obj/usr/src/sys/GENERIC
UNWIND: table added: base=e000000004000000, start=e0000000048aafa8, end=e0000000048d4ab0
Preloaded elf kernel "/boot/kernel/kernel" at 0xe000000005260000.
Preloaded mfs_root "/boot/mfsroot" at 0xe0000000052600e0.
CPU: Madison (1196.75-Mhz Itanium 2)
Origin = "GenuineIntel" Revision = 4
Features = 0x1<LB>
real memory = 2106621952 (2009 MB)
Physical memory chunk(s):
0x00064000 - 0x00081fff, 122880 bytes (15 pages)
0x00100000 - 0x007fffff, 7340032 bytes (896 pages)
0x01000000 - 0x03ffffff, 50331648 bytes (6144 pages)
0x05262000 - 0x0ff7ffff, 181526528 bytes (22159 pages)
0x10000000 - 0x7bab3fff, 1806385152 bytes (220506 pages)
0x7f980000 - 0x7f9fffff, 524288 bytes (64 pages)
0x7fe96000 - 0x7ff21fff, 573440 bytes (70 pages)
avail memory = 2033197056 (1939 MB)
FPSWA Revision = 0x10012, Entry = 0xe0000001ffe60050
Using ACPI2.0 table at 0x7ff83000
Table 'FACP' at 0xe00000007ff83138
Table 'APIC' at 0xe00000007ff83230
Local APIC address=0xfee00000
Local SAPIC entry
ProcessorId=0x0, Id=0xc0, Eid=0x18
Local SAPIC entry
ProcessorId=0x1, Id=0xc6, Eid=0x18
Local SAPIC entry
ProcessorId=0x2, Id=0xc2, Eid=0x18
Local SAPIC entry
ProcessorId=0x3, Id=0xc4, Eid=0x18
I/O SAPIC entry
Id=0x0, InterruptBase=0x0, Address=0xfec00000
I/O SAPIC entry
Id=0x1, InterruptBase=0x18, Address=0xfec10000
I/O SAPIC entry
Id=0x2, InterruptBase=0x30, Address=0xfec20000
I/O SAPIC entry
Id=0x3, InterruptBase=0x48, Address=0xfec30000
I/O SAPIC entry
Id=0x4, InterruptBase=0x60, Address=0xfec40000
I/O SAPIC entry
Id=0x5, InterruptBase=0x78, Address=0xfec50000
I/O SAPIC entry
Id=0x6, InterruptBase=0x90, Address=0xfec60000
Interrupt source override entry
Bus=0, Source=9, Irq=0x9
Platform interrupt entry
Polarity=3, TriggerMode=3, Id=0xc0, Eid=0x18, Vector=0x1e, Irq=22
MCA: allocated 16384 bytes for state info.
mem: <memory>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
acpi0: <INTEL SR870BN4> on motherboard
acpi0: [MPSAFE]
AcpiOsDerivePciId: bus 255 dev 28 func 1
AcpiOsDerivePciId: bus 255 dev 28 func 5
AcpiOsDerivePciId: bus 3 dev 31 func 0
AcpiOsDerivePciId: bus 255 dev 28 func 2
AcpiOsDerivePciId: bus 255 dev 28 func 3
AcpiOsDerivePciId: bus 12 dev 31 func 0
AcpiOsDerivePciId: bus 255 dev 28 func 4
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xc08-0xc0b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[20]: type 4, range 32, base 00004cc0, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24c2, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
map[20]: type 4, range 32, base 00004ce0, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x24c4, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=19
map[10]: type 1, range 32, base f9ff0000, size 10, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 23
found-> vendor=0x8086, dev=0x24cd, revid=0x02
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=23
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x244e, revid=0x82
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0f (3750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24c0, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x014f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001000, size 4, enabled
pcib0: no PRT entry for 0.31.INTA
found-> vendor=0x8086, dev=0x24cb, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=0
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x4cc0-0x4cdf irq 16 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4cc0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x4ce0-0x4cff irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4ce0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
uhub2: 4 ports with 4 removable, self powered
ukbd0: ATEN 4 Port USB KVM B V1.60, rev 1.10/1.00, addr 3, iclass 3/1
kbd0: ukbd0, generic (0), config:0x0, flags:0x1d0000
ums0: ATEN 4 Port USB KVM B V1.60, rev 1.10/1.00, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf9ff0000-0xf9ff03ff irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf9ff0000
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 4 ports with 4 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x5000-0x5fff
pcib1: memory decode 0xfa000000-0xfbffffff
pcib1: prefetched decode 0xfff00000-0xfffff
pcib1: Subtractively decoded bridge.
ACPI PCI link initial configuration:
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base fbfe0000, size 17, enabled
pcib1: device (null) requested decoded memory range 0xfbfe0000-0xfbffffff
map[18]: type 4, range 32, base 00005cc0, size 6, enabled
pcib1: device (null) requested decoded I/O range 0x5cc0-0x5cff
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 18
found-> vendor=0x8086, dev=0x100e, revid=0x02
bus=1, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0230, cachelnsz=32 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=18
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base fa000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0xfa000000-0xfaffffff
map[14]: type 4, range 32, base 00005800, size 8, enabled
pcib1: device (null) requested decoded I/O range 0x5800-0x58ff
map[18]: type 1, range 32, base fbfd0000, size 12, enabled
pcib1: device (null) requested decoded memory range 0xfbfd0000-0xfbfd0fff
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=1, slot=1, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=32 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0x5cc0-0x5cff mem 0xfbfe0000-0xfbffffff irq 18 at device 0.0 on pci1
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbfe0000
em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0x5cc0
em0: [MPSAFE]
em0: bpf attached
em0: Ethernet address: 00:07:e9:d8:14:91
em0: Speed:N/A Duplex:N/A
pci1: <display, VGA> at device 1.0 (no driver attached)
pci0: <bridge, PCI-ISA> at device 31.0 (no driver attached)
atapci0: <Intel ICH4 UDMA100 controller> port 0x1000-0x100f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 0 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1000
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata1-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata1: reset tp2 stat0=01 stat1=01 devices=0x0
ata1: [MPSAFE]
pcib2: <ACPI Host-PCI bridge> on acpi0
pcib2: could not get PCI interrupt routing table for \_SB_.PCI1 - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 32, base f1ff0000, size 12, enabled
found-> vendor=0x8086, dev=0x1461, revid=0x04
bus=2, slot=28, func=0
class=08-00-20, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0030, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1460, revid=0x04
bus=2, slot=29, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0030, cachelnsz=32 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base f1fe0000, size 12, enabled
found-> vendor=0x8086, dev=0x1461, revid=0x04
bus=2, slot=30, func=0
class=08-00-20, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0030, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1460, revid=0x04
bus=2, slot=31, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0030, cachelnsz=32 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
pci2: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci2
pcib3: secondary bus 3
pcib3: subordinate bus 5
pcib3: I/O decode 0x6000-0x7fff
pcib3: memory decode 0xf2000000-0xf5ffffff
pcib3: prefetched decode 0xe3f00000-0xebffffff
ACPI PCI link initial configuration:
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
map[10]: type 3, range 64, base e3ff0000, size 8, enabled
pcib3: device (null) requested decoded memory range 0xe3ff0000-0xe3ff00ff
pcib3: matched entry for 3.31.INTA
pcib3: slot 31 INTA hardwired to IRQ 71
found-> vendor=0x8086, dev=0x1462, revid=0x04
bus=3, slot=31, func=0
class=08-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=71
pci3: <base peripheral> at device 31.0 (no driver attached)
pci2: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 31.0 on pci2
pcib4: secondary bus 6
pcib4: subordinate bus 7
pcib4: I/O decode 0x8000-0x9fff
pcib4: memory decode 0xf6000000-0xf8ffffff
pcib4: prefetched decode 0xec000000-0xf0ffffff
ACPI PCI link initial configuration:
pci6: <ACPI PCI bus> on pcib4
pci6: physical bus=6
map[10]: type 4, range 32, base 00008800, size 8, enabled
pcib4: device (null) requested decoded I/O range 0x8800-0x88ff
map[14]: type 1, range 64, base f8fd0000, size 16, enabled
pcib4: device (null) requested decoded memory range 0xf8fd0000-0xf8fdffff
map[1c]: type 1, range 64, base f8fc0000, size 16, enabled
pcib4: device (null) requested decoded memory range 0xf8fc0000-0xf8fcffff
pcib4: matched entry for 6.2.INTA
pcib4: slot 2 INTA hardwired to IRQ 28
found-> vendor=0x1000, dev=0x0030, revid=0x07
bus=6, slot=2, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0230, cachelnsz=32 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns)
intpin=a, irq=28
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 4, range 32, base 00008c00, size 8, enabled
pcib4: device (null) requested decoded I/O range 0x8c00-0x8cff
map[14]: type 1, range 64, base f8ff0000, size 16, enabled
pcib4: device (null) requested decoded memory range 0xf8ff0000-0xf8ffffff
map[1c]: type 1, range 64, base f8fe0000, size 16, enabled
pcib4: device (null) requested decoded memory range 0xf8fe0000-0xf8feffff
pcib4: matched entry for 6.2.INTB
pcib4: slot 2 INTB hardwired to IRQ 29
found-> vendor=0x1000, dev=0x0030, revid=0x07
bus=6, slot=2, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0230, cachelnsz=32 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns)
intpin=b, irq=29
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 3, range 64, base f0ff0000, size 8, enabled
pcib4: device (null) requested decoded memory range 0xf0ff0000-0xf0ff00ff
pcib4: matched entry for 6.31.INTA
pcib4: slot 31 INTA hardwired to IRQ 47
found-> vendor=0x8086, dev=0x1462, revid=0x04
bus=6, slot=31, func=0
class=08-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=47
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x8800-0x88ff mem 0xf8fc0000-0xf8fcffff,0xf8fd0000-0xf8fdffff irq 28 at device 2.0 on pci6
mpt0: Reserved 0x10000 bytes for rid 0x14 type 3 at 0xf8fd0000
mpt0: [GIANT-LOCKED]
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x8c00-0x8cff mem 0xf8fe0000-0xf8feffff,0xf8ff0000-0xf8ffffff irq 29 at device 2.1 on pci6
mpt1: linking with peer (mpt0)
mpt1: Reserved 0x10000 bytes for rid 0x14 type 3 at 0xf8ff0000
mpt1: [GIANT-LOCKED]
pci6: <base peripheral> at device 31.0 (no driver attached)
unknown: not probed (disabled)
pcib5: <ACPI Host-PCI bridge> on acpi0
pcib5: could not get PCI interrupt routing table for \_SB_.PCI3 - AE_NOT_FOUND
pci9: <ACPI PCI bus> on pcib5
pci9: physical bus=9
map[10]: type 1, range 32, base dbff0000, size 12, enabled
found-> vendor=0x8086, dev=0x1461, revid=0x04
bus=9, slot=28, func=0
class=08-00-20, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0030, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1460, revid=0x04
bus=9, slot=29, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0030, cachelnsz=32 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base dbfe0000, size 12, enabled
found-> vendor=0x8086, dev=0x1461, revid=0x04
bus=9, slot=30, func=0
class=08-00-20, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0030, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1460, revid=0x04
bus=9, slot=31, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0030, cachelnsz=32 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
pci9: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 29.0 on pci9
pcib6: secondary bus 10
pcib6: subordinate bus 11
pcib6: I/O decode 0xa000-0xafff
pcib6: memory decode 0xdc000000-0xddffffff
pcib6: prefetched decode 0xcbf00000-0xcfffffff
ACPI PCI link initial configuration:
pci10: <ACPI PCI bus> on pcib6
pci10: physical bus=10
map[10]: type 3, range 64, base cbff0000, size 8, enabled
pcib6: device (null) requested decoded memory range 0xcbff0000-0xcbff00ff
pcib6: matched entry for 10.31.INTA
pcib6: slot 31 INTA hardwired to IRQ 119
found-> vendor=0x8086, dev=0x1462, revid=0x04
bus=10, slot=31, func=0
class=08-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=119
pci10: <base peripheral> at device 31.0 (no driver attached)
pci9: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib7: <ACPI PCI-PCI bridge> at device 31.0 on pci9
pcib7: secondary bus 12
pcib7: subordinate bus 14
pcib7: I/O decode 0xb000-0xcfff
pcib7: memory decode 0xde000000-0xe2ffffff
pcib7: prefetched decode 0xd0000000-0xdaffffff
ACPI PCI link initial configuration:
pci12: <ACPI PCI bus> on pcib7
pci12: physical bus=12
map[10]: type 3, range 64, base daff0000, size 8, enabled
pcib7: device (null) requested decoded memory range 0xdaff0000-0xdaff00ff
pcib7: matched entry for 12.31.INTA
pcib7: slot 31 INTA hardwired to IRQ 95
found-> vendor=0x8086, dev=0x1462, revid=0x04
bus=12, slot=31, func=0
class=08-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=95
pci12: <base peripheral> at device 31.0 (no driver attached)
pcib8: <ACPI Host-PCI bridge> on acpi0
pcib8: could not get PCI interrupt routing table for \_SB_.PCI4 - AE_NOT_FOUND
pci15: <ACPI PCI bus> on pcib8
pci15: physical bus=15
map[10]: type 1, range 32, base c5ff0000, size 12, enabled
found-> vendor=0x8086, dev=0x1461, revid=0x04
bus=15, slot=28, func=0
class=08-00-20, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0030, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1460, revid=0x04
bus=15, slot=29, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0030, cachelnsz=32 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base c5fe0000, size 12, enabled
found-> vendor=0x8086, dev=0x1461, revid=0x04
bus=15, slot=30, func=0
class=08-00-20, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0030, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1460, revid=0x04
bus=15, slot=31, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0030, cachelnsz=32 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
pci15: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 29.0 on pci15
pcib9: secondary bus 16
pcib9: subordinate bus 17
pcib9: I/O decode 0xd000-0xdfff
pcib9: memory decode 0xc6000000-0xc7ffffff
pcib9: prefetched decode 0xbbf00000-0xbfffffff
ACPI PCI link initial configuration:
pci16: <ACPI PCI bus> on pcib9
pci16: physical bus=16
map[10]: type 3, range 64, base bbff0000, size 8, enabled
pcib9: device (null) requested decoded memory range 0xbbff0000-0xbbff00ff
pcib9: matched entry for 16.31.INTA
pcib9: slot 31 INTA hardwired to IRQ 167
found-> vendor=0x8086, dev=0x1462, revid=0x04
bus=16, slot=31, func=0
class=08-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=167
pci16: <base peripheral> at device 31.0 (no driver attached)
pci15: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib10: <ACPI PCI-PCI bridge> at device 31.0 on pci15
pcib10: secondary bus 18
pcib10: subordinate bus 19
pcib10: I/O decode 0xe000-0xefff
pcib10: memory decode 0xc8000000-0xcaffffff
pcib10: prefetched decode 0xc0000000-0xc4ffffff
ACPI PCI link initial configuration:
pci18: <ACPI PCI bus> on pcib10
pci18: physical bus=18
map[10]: type 3, range 64, base c4ff0000, size 8, enabled
pcib10: device (null) requested decoded memory range 0xc4ff0000-0xc4ff00ff
pcib10: matched entry for 18.31.INTA
pcib10: slot 31 INTA hardwired to IRQ 143
found-> vendor=0x8086, dev=0x1462, revid=0x04
bus=18, slot=31, func=0
class=08-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=143
pci18: <base peripheral> at device 31.0 (no driver attached)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0
uart0: fast interrupt
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: fast interrupt
uart1: console (57600,n,8,1)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
procfs registered
Timecounter "ITC" frequency 1196754000 Hz quality 0
Timecounters tick every 10.000 msec
lo0: bpf attached
md0: Preloaded image </boot/mfsroot> 8388608 bytes at 0xe000000004a5cf30
ata0-slave: pio=0x0c wdma=0x22 udma=0xffffffff cable=80pin
GEOM: Configure md0a, start 8192 length 8380416 end 8388607
GEOM: Configure md0c, start 0 length 8388608 end 8388607
ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata0-master: setting PIO4 on Intel ICH4 chip
ata0-master: setting UDMA33 on Intel ICH4 chip
ata0-slave: setting PIO4 on Intel ICH4 chip
acd0: <MATSHITADVD-ROM SR-8176/MZ31> DVDROM drive at ata0 as master
acd0: read 4125KB/s (4125KB/s), 256KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
afd0: <LS-120/240 00 UHD Floppy/H045MA40> removable drive at ata0 as slave
afd0: 229MB (469504 sectors), 262 cyls, 32 heads, 56 S/T, 512 B/S
afd0: 2995KB/s, PIO4
Waiting 5 seconds for SCSI devices to settle
GEOM: new disk afd0
uhub2: at uhub1 port 1 (addr 2) disconnected
ukbd0: at uhub2 port 1 (addr 3) disconnected
ukbd0: detached
ums0: at uhub2 port 1 (addr 3) disconnected
ums0: detached
uhub2: detached
uhub2: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
uhub2: 4 ports with 4 removable, self powered
ukbd0: ATEN 4 Port USB KVM B V1.60, rev 1.10/1.00, addr 3, iclass 3/1
kbd0: ukbd0, generic (0), config:0x0, flags:0x1d0000
ums0: ATEN 4 Port USB KVM B V1.60, rev 1.10/1.00, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
(probe15:mpt1:0:0:0): error 22
(probe15:mpt1:0:0:0): Unretryable Error
(probe1:mpt0:0:1:0): error 22
(probe1:mpt0:0:1:0): Unretryable Error
(probe16:mpt1:0:1:0): error 22
(probe16:mpt1:0:1:0): Unretryable Error
(probe2:mpt0:0:2:0): error 22
(probe2:mpt0:0:2:0): Unretryable Error
(probe17:mpt1:0:2:0): error 22
(probe17:mpt1:0:2:0): Unretryable Error
(probe3:mpt0:0:3:0): error 22
(probe3:mpt0:0:3:0): Unretryable Error
(probe18:mpt1:0:3:0): error 22
(probe18:mpt1:0:3:0): Unretryable Error
(probe4:mpt0:0:4:0): error 22
(probe4:mpt0:0:4:0): Unretryable Error
(probe19:mpt1:0:4:0): error 22
(probe19:mpt1:0:4:0): Unretryable Error
(probe5:mpt0:0:5:0): error 22
(probe5:mpt0:0:5:0): Unretryable Error
(probe20:mpt1:0:5:0): error 22
(probe20:mpt1:0:5:0): Unretryable Error
(probe7:mpt0:0:8:0): error 22
(probe7:mpt0:0:8:0): Unretryable Error
(probe21:mpt1:0:6:0): error 22
(probe21:mpt1:0:6:0): Unretryable Error
(probe8:mpt0:0:9:0): error 22
(probe8:mpt0:0:9:0): Unretryable Error
(probe22:mpt1:0:8:0): error 22
(probe22:mpt1:0:8:0): Unretryable Error
(probe9:mpt0:0:10:0): error 22
(probe9:mpt0:0:10:0): Unretryable Error
(probe23:mpt1:0:9:0): error 22
(probe23:mpt1:0:9:0): Unretryable Error
(probe10:mpt0:0:11:0): error 22
(probe10:mpt0:0:11:0): Unretryable Error
(probe24:mpt1:0:10:0): error 22
(probe24:mpt1:0:10:0): Unretryable Error
(probe11:mpt0:0:12:0): error 22
(probe11:mpt0:0:12:0): Unretryable Error
(probe25:mpt1:0:11:0): error 22
(probe25:mpt1:0:11:0): Unretryable Error
(probe12:mpt0:0:13:0): error 22
(probe12:mpt0:0:13:0): Unretryable Error
(probe26:mpt1:0:12:0): error 22
(probe26:mpt1:0:12:0): Unretryable Error
(probe13:mpt0:0:14:0): error 22
(probe13:mpt0:0:14:0): Unretryable Error
(probe27:mpt1:0:13:0): error 22
(probe27:mpt1:0:13:0): Unretryable Error
(probe14:mpt0:0:15:0): error 22
(probe14:mpt0:0:15:0): Unretryable Error
(probe0:mpt0:0:0:0): Retrying Command
(probe28:mpt1:0:14:0): error 22
(probe28:mpt1:0:14:0): Unretryable Error
(probe29:mpt1:0:15:0): error 22
(probe29:mpt1:0:15:0): Unretryable Error
pass0 at mpt0 bus 0 target 0 lun 0
pass0: <QUANTUM QM39100TD-SCA N1K0> Fixed Direct Access SCSI-2 device
pass0: Serial Number PCB=20-116002-05; HDA=329905851953
pass0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
pass1 at mpt0 bus 0 target 6 lun 0
pass1: <ESG-SHV SCA HSBP M17 1.03> Fixed Processor SCSI-2 device
pass1: Serial Number 1
pass1: 3.300MB/s transfers
ses0 at mpt0 bus 0 target 6 lun 0
ses0: <ESG-SHV SCA HSBP M17 1.03> Fixed Processor SCSI-2 device
ses0: Serial Number 1
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
GEOM: new disk da0
da0 at mpt0 bus 0 target 0 lun 0
da0: <QUANTUM QM39100TD-SCA N1K0> Fixed Direct Access SCSI-2 device
da0: Serial Number PCB=20-116002-05; HDA=329905851953
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 8683MB (17783249 512 byte sectors: 255H 63S/T 1106C)
[0] f:00 typ:11 s(CHS):0/1/1 e(CHS):12/254/63 s:63 l:208782
[1] f:80 typ:3 s(CHS):13/0/1 e(CHS):38/254/63 s:208845 l:417690
[2] f:00 typ:130 s(CHS):852/0/1 e(CHS):1023/254/63 s:13687380 l:4080510
[3] f:00 typ:131 s(CHS):39/0/1 e(CHS):851/254/63 s:626535 l:13060845
GEOM: Configure da0s1, start 32256 length 106896384 end 106928639
GEOM: Configure da0s2, start 106928640 length 213857280 end 320785919
GEOM: Configure da0s3, start 7007938560 length 2089221120 end 9097159679
GEOM: Configure da0s4, start 320785920 length 6687152640 end 7007938559
Mounting root from ufs:/dev/md0
WARNING: clock gained 15 days -- CHECK AND RESET THE DATE!
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /stand/sysinstall
/stand/sysinstall running as init on serial console
These are the predefined terminal types available to
sysinstall when running stand-alone. Please choose the
closest match for your particular terminal.
1 ...................... Standard ANSI terminal.
2 ...................... VT100 or compatible terminal.
3 ...................... FreeBSD system console (color).
4 ...................... FreeBSD system console (monochrome).
5 ...................... xterm terminal emulator.
Your choice: (1-5)
More information about the freebsd-bugs
mailing list