kern/73313: Maxtor Onetouch drivers hang when used with firewire.

[Heikki Suonsivu]

Hidetoshi Shimokawa writes:
 > At Sat, 30 Oct 2004 16:28:26 +0300 (EEST),
 > Heikki Suonsivu wrote:
 > > Oct 30 15:30:45 hsu /kernel: Unknown service addr 0x0000:0x04f14800 WREQB(1) src=0xffc2 data=8
 > > Oct 30 15:32:39 hsu /kernel: Unknown service addr 0x0000:0x03b83800 WREQB(1) src=0xffc2 data=8
 > > Oct 30 15:32:54 hsu /kernel: Unknown service addr 0x0000:0x1761b800 WREQB(1) src=0xffc2 data=8
 > > Oct 30 15:32:54 hsu /kernel: Unknown service addr 0x0000:0x16242800 WREQB(1) src=0xffc2 data=8
 > > Oct 30 15:32:59 hsu /kernel: Unknown service addr 0x0000:0x0dddb000 WREQB(1) src=0xffc2 data=8
 > 
 > These address ranges should be handled as physical access and 
 > the kernel shouldn't be notified of it.
 > It seems that your fwohci chip stop handling of physical access
 > for unknown reason and this leads to timeout error.
 > 
 > Can you swap your fwohci card with other cards with a different chip?

I do not have any other cards, so not easily.  The above errors do not seem
necessarily hang or crash the computer.  I currently have messages full of
those messages, but the computer is still ok and firewire works (copying
large amount of data from firewire to ata disk - two crashes during this
300G copy).  I think there is an improvement though, as I now get a crash
instead of the computer hanging up.  I enabled crash dumps.

 > /\ Hidetoshi Shimokawa
 > \/  simokawa at FreeBSD.org