kern/61841: 5.2 Boot freeze if memorybird (USB storage device) is plugged in

[Henri Hennebert]

The following reply was made to PR kern/61841; it has been noted by GNATS.

From: Henri Hennebert <hlh at cocoon.cercle.be>
To: freebsd-gnats-submit at FreeBSD.org, hlh at cocoon.cercle.be
Cc:  
Subject: Re: kern/61841: 5.2 Boot freeze if memorybird (USB storage device)
 is plugged in
Date: Sat, 24 Jan 2004 18:32:38 +0100

 Here is a complete dmesg.boot :
 
 Copyright (c) 1992-2004 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
 FreeBSD 5.2-RELEASE #0: Sun Jan 11 15:03:32 CET 2004
     hlh at norquay.cocoon.bel:/usr/obj/usr/src/sys/NORQUAY
 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0820000.
 Preloaded elf module "/boot/kernel/acpi.ko" at 0xc082026c.
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: Intel Pentium III (994.46-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
   
 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
 real memory  = 536870912 (512 MB)
 avail memory = 511766528 (488 MB)
 Pentium Pro MTRR support enabled
 npx0: [FAST]
 npx0: <math processor> on motherboard
 npx0: INT 16 interface
 acpi0: <PTLTD    RSDT  > on motherboard
 pcibios: BIOS version 2.10
 Using $PIR table, 10 entries at 0xc00fdf20
 acpi0: Power Button (fixed)
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf008-0xf00b on acpi0
 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
 acpi_button0: <Power Button> on acpi0
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pci0: <ACPI PCI bus> on pcib0
 pcib0: slot 31 INTD is routed to irq 9
 pcib0: slot 31 INTB is routed to irq 5
 pcib0: slot 31 INTC is routed to irq 11
 pcib0: slot 31 INTB is routed to irq 5
 agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 
 0xf4000000-0xf7ffffff at device 0.0 on pci0
 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
 pci1: <ACPI PCI bus> on pcib1
 pcib1: slot 0 INTA is routed to irq 10
 pci1: <display, VGA> at device 0.0 (no driver attached)
 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 pci2: <ACPI PCI bus> on pcib2
 pcib2: slot 8 INTA is routed to irq 9
 pcib2: slot 9 INTA is routed to irq 11
 fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0x4400-0x443f 
 mem 0xf0100000-0xf0100fff irq 9 at device 8.0 on pci2
 fxp0: Ethernet address 00:30:05:12:bb:bf
 miibus0: <MII bus> on fxp0
 inphy0: <i82562ET 10/100 media interface> on miibus0
 inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x4800-0x487f mem 
 0xf0101000-0xf010107f irq 11 at device 9.0 on pci2
 xl0: Ethernet address: 00:04:76:9f:33:24
 miibus1: <MII bus> on xl0
 ukphy0: <Generic IEEE 802.3u media interface> on miibus1
 ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 isab0: <PCI-ISA bridge> at device 31.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <Intel ICH2 UDMA100 controller> port 0x2400-0x240f at device 
 31.1 on pci0
 ata0: at 0x1f0 irq 14 on atapci0
 ata0: [MPSAFE]
 ata1: at 0x170 irq 15 on atapci0
 ata1: [MPSAFE]
 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 
 0x1400-0x141f irq 9 at device 31.2 on pci0
 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
 usb0: USB revision 1.0
 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 
 0x1c00-0x1c1f irq 11 at device 31.4 on pci0
 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
 usb1: USB revision 1.0
 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 pcm0: <Intel ICH2 (82801BA)> port 0x2000-0x203f,0x1000-0x10ff irq 5 at 
 device 31.5 on pci0
 pcm0: <Analog Devices AD1885 AC97 Codec>
 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
 kbd0 at atkbd0
 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 psm0: model IntelliMouse, device ID 3
 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 
 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
 fdc0: FIFO enabled, 8 bytes threshold
 fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 ppc0 port 0x378-0x37f irq 7 on acpi0
 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
 ppbus0: <Parallel port bus> on ppc0
 plip0: <PLIP network interface> on ppbus0
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 sio0 port 0x3f8-0x3ff irq 4 on acpi0
 sio0: type 16550A
 sio1 port 0x2f8-0x2ff irq 3 on acpi0
 sio1: type 16550A
 orm0: <Option ROMs> at iomem 0xc8000-0xc87ff,0xc0000-0xc7fff on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 Timecounter "TSC" frequency 994456222 Hz quality 800
 Timecounters tick every 10.000 msec
 ipfw2 initialized, divert enabled, rule-based forwarding enabled, 
 default to deny, logging disabled
 GEOM: create disk ad0 dp=0xc47f4b60
 ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master UDMA100
 acd0: DVDROM <MATSHITADVD-ROM SR-8587> at ata1-master PIO4
 Mounting root from ufs:/dev/ad0s1a