misc/60646: VIA C3 system hangs on reboot
David Xu
davidxu at freebsd.org
Thu Jan 1 22:00:40 PST 2004
The following reply was made to PR misc/60646; it has been noted by GNATS.
From: David Xu <davidxu at freebsd.org>
To: Chris Miller <admin at forkthepenguin.com>
Cc: freebsd-gnats-submit at freebsd.org
Subject: Re: misc/60646: VIA C3 system hangs on reboot
Date: Fri, 02 Jan 2004 14:07:40 +0800
I have a VIA EPIA-M II board in hand, its chipset is VIA CLE266, runs
just fine, no the reboot problem you reported, I think it is not CPU
related, but chipsets or motherboard related, I saw your motherboard is
using SIS's chipsets...
Chris Miller wrote:
>>Number: 60646
>>Category: misc
>>Synopsis: VIA C3 system hangs on reboot
>>Confidential: no
>>Severity: serious
>>Priority: medium
>>Responsible: freebsd-bugs
>>State: open
>>Quarter:
>>Keywords:
>>Date-Required:
>>Class: sw-bug
>>Submitter-Id: current-users
>>Arrival-Date: Sat Dec 27 23:30:20 PST 2003
>>Closed-Date:
>>Last-Modified:
>>Originator: Chris Miller
>>Release: 4.9 Release
>>Organization:
>>Environment:
>
> FreeBSD daemon.yahp.net 4.9-RELEASE-p1 FreeBSD 4.9-RELEASE-p1 #3: Sat Dec 27 22:57:22 GMT 2003 root at daemon.yahp.net:/usr/obj/usr/src/sys/YAHP i386
>
>>Description:
>
> This problem was previously reported in kern/41343 14 months ago, it was closed without resolution :-(. The system in question uses a VIA C3 Samuel processor running at 800Mhz. Reboot results in a system hang after fully halting and printing "Rebooting" to the console, just as reported in the original PR. I have two identical machines with the same problem. This occurs with both generic and customized kernel configurations.
>
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 4.9-RELEASE-p1 #3: Sat Dec 27 22:57:22 GMT 2003
> root at daemon.yahp.net:/usr/obj/usr/src/sys/YAHP
> Timecounter "i8254" frequency 1193182 Hz
> CPU: VIA C3 Samuel 2 (801.82-MHz 686-class CPU)
> Origin = "CentaurHauls" Id = 0x673 Stepping = 3
> Features=0x803035<FPU,DE,TSC,MSR,MTRR,PGE,MMX>
> real memory = 130023424 (126976K bytes)
> avail memory = 121139200 (118300K bytes)
> Preloaded elf kernel "kernel" at 0xc0543000.
> md0: Malloc disk
> Using $PIR table, 5 entries at 0xc00f7640
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> agp0: <SIS Generic host to PCI bridge> mem 0xf4000000-0xf7ffffff at device 0.0 on pci0
> atapci0: <SiS 5591 ATA66 controller> port 0xffa0-0xffaf,0x374-0x377,0x170-0x173,0x3f4-0x3f7,0x1f0-0x1f3 irq 0 at device 0.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0
> isa0: <ISA bus> on isab0
> sis0: <SiS 900 10/100BaseTX> port 0xdc00-0xdcff mem 0xf3ffc000-0xf3ffcfff irq 12 at device 1.1 on pci0
> sis0: Ethernet address: 00:0a:e6:ae:17:67
> miibus0: <MII bus> on sis0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> ohci0: <SiS 5571 USB controller> mem 0xf3ffd000-0xf3ffdfff irq 11 at device 1.2 on pci0
> usb0: OHCI version 1.0, legacy support
> usb0: <SiS 5571 USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 3 ports with 3 removable, self powered
> ohci1: <SiS 5571 USB controller> mem 0xf3ffe000-0xf3ffefff irq 11 at device 1.3 on pci0
> usb1: OHCI version 1.0, legacy support
> usb1: <SiS 5571 USB controller> on ohci1
> usb1: USB revision 1.0
> uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> pci0: <unknown card> (vendor=0x1039, dev=0x7018) at 1.4 irq 10
> pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 2.0 on pci0
> pci1: <PCI bus> on pcib2
> pci1: <SiS model 6300 VGA-compatible display device> at 0.0
> pcib1: <SiS 5591 host to AGP bridge> on motherboard
> pci2: <PCI bus> on pcib1
> orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xd3fff on isa0
> pmtimer0 on isa0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/16 bytes threshold
> ppi0: <Parallel I/O> on ppbus0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging unlimited
> ad0: 29325MB <Maxtor 6E030L0> [59582/16/63] at ata0-master UDMA66
> acd0: CDROM <ATAPI-CD ROM-DRIVE-52MAX> at ata1-slave PIO4
> Mounting root from ufs:/dev/ad0s1a
>
>
>
>>How-To-Repeat:
>
> Type reboot :-)
>
>>Fix:
>
>
>
>>Release-Note:
>>Audit-Trail:
>>Unformatted:
>
> _______________________________________________
> freebsd-bugs at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-bugs
> To unsubscribe, send any mail to "freebsd-bugs-unsubscribe at freebsd.org"
>
>
More information about the freebsd-bugs
mailing list