problems with pcmcia under 5.2.1

Ralf.Luettgen at scs-luettgen.de Ralf.Luettgen at scs-luettgen.de
Sat Feb 28 14:09:48 PST 2004


Hi folk's,

Today, I've installed a fresh 5.2.1 release on my DELL INSPIRON 7500 NOTEBOOK,
but my Adaptec SlimSCSI 1460D and my D-Link DE-660 won't work.

When I insert the cards I got the following error:
For Adaptec:
CIS is too long -- truncating
pccard0: Card has no functions!
cbb0: PC Card card activation failed
For D-Link:
cbb0: PC Card card activation failed
ed0: <D-Link DE-660> at port 0x140-0x15f irq 11 function 0 config 32 on pccard0
device_probe_and_attach: ed0 attach returned 6

I've also tested a YAKUMO Modem PCMCIA card, and I've got the same error
message as by Adaptec..


My kernel configuration:
FreeBSD 5.2.1-RELEASE #0: Sat Feb 28 17:40:31 CET 2004
    root at notebook1.my-home.de:/usr/obj/usr/src/sys/NOTEBOOK
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08f4000.
Preloaded elf module "/boot/kernel/ipfw.ko" at 0xc08f41f4.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08f42a0.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (751.71-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
 
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,MMX,FXSR,SSE>
real memory  = 268369920 (255 MB)
avail memory = 251039744 (239 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: Other PM system enabled.
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fdf50
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:7 INTD BIOS irq 5
pci_cfgintr: 0:8 INTA BIOS irq 5
pci_cfgintr: 0:16 INTA BIOS irq 5
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at
device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci_cfgintr: 1:0 INTA BIOS irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1225 PCI-CardBus Bridge> mem 0x88000000-0x88000fff at device 4.0 on
pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci_cfgintr: 0:4 INTA routed to irq 11
cbb0: [MPSAFE]
cbb1: <TI1225 PCI-CardBus Bridge> mem 0x88001000-0x88001fff at device 4.1 on
pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci_cfgintr: 0:4 INTA routed to irq 11
cbb1: [MPSAFE]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1050-0x105f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 5 at
device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcm0: <ESS Technology Maestro-2E> port 0x1400-0x14ff irq 5 at device 8.0 on pci0
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
pci0: <simple comms> at device 16.0 (no driver attached)
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio2: configured irq 5 not in bitmap of probed irqs 0
sio2: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
psmcpnp0: irq resource info is missing; assuming irq 12
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to
deny, logging disabled
IPsec: Initialized Security Association Processing.
wi0: <NETGEAR MA401RA Wireless PC Card> at port 0x100-0x13f irq 11 function 0
config 1 on pccard1
wi0: 802.11 address: 00:09:5b:54:ec:31
wi0: using RF:PRISM2.5 MAC:ISL3873
wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
GEOM: create disk ad0 dp=0xc2e24a60
ad0: 19077MB <IBM-DJSA-220> [38760/16/63] at ata0-master UDMA33
acd0: CDRW <MATSHITA CD-RW UJDA310> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s3a
WARNING: pseudo-random number generator used for IPsec processing
ltmdm0: <Lucent Winmodem> port 0x1800-0x18ff,0x1080-0x1087 mem
0xfc000000-0xfc0000ff irq 5 at device 16.0 on pci0
ltmdm0: type Virtual 16550A

Is there anyone who could help me?

Regards
Ralf





----------------------------------
E-Mail: Ralf.Luettgen at scs-luettgen.de
Date: 28-Feb-2004
Time: 23:00:32

This message was sent by XFMail
----------------------------------


More information about the freebsd-bugs mailing list