kern/70608: ethernet-error

Andreas.Hovin at Andreas.Hovin at
Tue Aug 17 22:10:23 PDT 2004

>Number:         70608
>Category:       kern
>Synopsis:       ethernet-error
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          open
>Class:          update
>Submitter-Id:   current-users
>Arrival-Date:   Wed Aug 18 05:10:22 GMT 2004
>Originator:     Andreas Hovin
>Release:        FreeBSD 4.10-STABLE i386
System: FreeBSD 4.10-STABLE FreeBSD 4.10-STABLE #1: Tue Aug 17 20:31:08 CEST 2004 root at i386

Aug 18 07:02:39 bumblebee /kernel: rue0: REALTEK USB 10/100 LAN, rev 1.10/1.00, addr 2
Aug 18 07:02:40 bumblebee /kernel: rue0: Ethernet address: 00:10:a7:23:15:59
Aug 18 07:02:40 bumblebee /kernel: miibus0: <MII bus> on rue0
Aug 18 07:02:40 bumblebee /kernel: ruephy0: <RealTek RTL8150 internal media interface> on miibus0
Aug 18 07:02:40 bumblebee /kernel: ruephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1000-0x101f irq 11 at device 7.2 on pci0
pcic0: <TI PCI-1220 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at device 17.0 on pci0
pcic1: <TI PCI-1220 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at device 17.1 on pci0

I have a problem while i load my USB-ethernet. In 5.x it work fine, but in 4.x i get this error:

rue0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        tunnel inet  --> 
        ether 00:10:a7:23:15:59
        media: Ethernet autoselect (none)
        status: no carrier
        vlan: 0 parent interface: <none>
        ssid ""
        stationname ""
        channel 0 authmode NONE powersavemode OFF
        wepmode OFF weptxkey 1

In the dmesg, you see that the pci-cardbus got same irq as usb controller. Could that be a problem? In bios i dont have any option to change irq's.
When i set IP on the ethernet the system crash, looks like kernel panic.




More information about the freebsd-bugs mailing list