kern/57348: Inserting PC-CARD hangs laptop
Michael Neumann
mneumann at ntecs.de
Mon Sep 29 05:20:25 PDT 2003
>Number: 57348
>Category: kern
>Synopsis: Inserting PC-CARD hangs laptop
>Confidential: no
>Severity: serious
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon Sep 29 05:20:12 PDT 2003
>Closed-Date:
>Last-Modified:
>Originator: Michael Neumann
>Release: FreeBSD 5.1-CURRENT i386
>Organization:
>Environment:
System: FreeBSD lap.neumann.all 5.1-CURRENT FreeBSD 5.1-CURRENT #0: Sat Sep 27 12:18:58 CEST 2003 mneumann at lap.neumann.all:/usr/src/sys/i386/compile/LAPTOP i386
>Description:
Inserting the Compaq Netelligent 10/100 PC Card hangs my laptop. This happens
with FreeBSD 5.1-STABLE as well as with -CURRENT, with OLDCARD or NEWCARD (I
tried both).
When I boot with the card inserted, the laptop hangs at "start_init: trying
/sbin/init" (it does *not* panic!). Hanging means, that typing on the keyboard
does not have any effect, nor can I log in via telnet remotely nor can I reboot
(I have to remove batteries), in short I can't do anything. But when I put the
laptop into sleep mode (by closing the display (lid)) and awake it again (by
pressing the power button), then the following messages are shown (but after
that, it still hangs):
acpi_lid0: Lid closed
fwohci0: fwohci_pci_suspend
pcib0: matched entry for 0.29.INTA (source \\_SB_.PCI0.LPCB.LNKA)
pcib0: slot 29 INTA is routed to irq 10
pcib0: matched entry for 0.29.INTB (source \\_SB_.PCI0.LPCB.LNKD)
pcib0: slot 29 INTB is routed to irq 11
pcib0: matched entry for 0.29.INTC (source \\_SB_.PCI0.LPCB.LNKC)
pcib0: slot 29 INTC is routed to irq 11
pcib0: matched entry for 0.31.INTB (source \\_SB_.PCI0.LPCB.LNKB)
pcib0: slot 31 INTB is routed to irq 11
pcib0: matched entry for 0.31.INTB (source \\_SB_.PCI0.LPCB.LNKB)
pcib0: slot 31 INTB is routed to irq 11
pci_cfgintr_valid: BIOS irq 10 is valid
pci_cfgintr: 1:0 INTA BIOS irq 10
pcib2: matched entry for 2.0.INTA (source \\_SB_.PCI0.LPCB.LNKB)
pcib2: slot 0 INTA is routed to irq 11
pcib2: matched entry for 2.1.INTA (source \\_SB_.PCI0.LPCB.LNKD)
pcib2: slot 1 INTA is routed to irq 11
pcib2: matched entry for 2.2.INTA (source \\_SB_.PCI0.LPCB.LNKC)
pcib2: slot 2 INTA is routed to irq 11
pcib2: matched entry for 2.3.INTA (source \\_SB_.PCI0.LPCB.LNKC)
pcib2: slot 3 INTA is routed to irq 11
fwohci0: fwohci_pci_resume: power_state = 0x00000000
fwohci0: latency timer 128 -> 128.
fwohci0: cache size 8 -> 8.
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x3 loop=1, retry=0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xf064a032 -> 0xf864a032
sbp_post_busreset
fwohci0: fwohci_set_intr: 1
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
wakeup from sleeping state (slept 01:10:24)
ata0: resetting devices ..
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ad0: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
fwohci0: BUS reset
sbp_post_busreset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: start AT DMA status=0
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
00742080 OUTM ST0 NEV NEV 0 00000000 00000000 0000:0000 Nostat
00742080 OUTM ST0 NEV NEV 0 00000000 00000000 0000:0000 Nostat
00742080 OUTM ST0 NEV NEV 0 00000000 00000000 0000:0000 Nostat
00742080 OUTM ST0 NEV NEV 0 00000000 00000000 0000:0000 Nostat
00742080 OUTM ST0 NEV NEV 0 00000000 00000000 0000:0000 Nostat
00742080 OUTM ST0 NEV NEV 0 00000000 00000000 0000:0000 Nostat
00742080 OUTM ST0 NEV NEV 0 00000000 00000000 0000:0000 Nostat
00742080 OUTM ST0 NEV NEV 0 00000000 00000000 0000:0000 Nostat
00742080 OUTM ST0 NEV NEV 0 00000000 00000000 0000:0000 Nostat
fwohci0: unrecoverable error
acpi_lid0: Lid opened
ad0: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
done
ata1: resetting devices ..
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
acd0: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
acd0: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
done
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
bus_explore done
sbp_post_explore (sbp_cold=0)
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
/dev/vmmon: Vmx86_DestroyVM: unlocked pages: 455031, unlocked dirty pages: 306812
-------------------------------------------------------------
Linux (on the same Laptop) accepts the card without problems, NetBSD on a
different laptop has no problems with the card, too.
I tried to use a different IRQ in pccard.conf (config auto "xe" 5), as IRQ 3
is already used, but the same happens.
Here the kernel config section of interest:
# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
device cbb # cardbus (yenta) bridge
#device pcic # ExCA ISA and PCI bridges
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# OLDCARD
nodevice cbb # cardbus (yenta) bridge
#nodevice pcic # ExCA ISA and PCI bridges
nodevice pccard # PC Card (16-bit) bus
nodevice cardbus # CardBus (32-bit) bus
device card 1 # pccard bus
device pcic # PCMCIA bridge
I removed all below "OLDCARD" when I tried NEWCARD.
With NEWCARD, I get at boot without card inserted:
Sep 24 10:01:40 lap kernel: cbb0: <ENE CB1410 PCI-CardBus Bridge> at device 3.0 on pci2
Sep 24 10:01:40 lap kernel: pcib2: device cbb0 requested decoded memory range 0xd0000000-0xdfffffff
Sep 24 10:01:40 lap kernel: cardbus0: <CardBus bus> on cbb0
Sep 24 10:01:40 lap kernel: pccard0: <16-bit PCCard bus> on cbb0
Sep 24 10:01:40 lap kernel: pcib2: matched entry for 2.3.INTA (source \_SB_.PCI0.LPCB.LNKC)
Sep 24 10:01:40 lap kernel: pcib2: slot 3 INTA is routed to irq 11
Sep 24 10:01:40 lap kernel: cbb0: [MPSAFE]
Sep 24 10:01:40 lap kernel: cbb0: PCI Configuration space:
Sep 24 10:01:40 lap kernel: 0x00: 0x14101524 0x02100007 0x06070000 0x00024000
Sep 24 10:01:40 lap kernel: 0x10: 0xd0000000 0x020000a0 0x40000002 0xfffff000
Sep 24 10:01:40 lap kernel: 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
Sep 24 10:01:40 lap kernel: 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
Sep 24 10:01:40 lap kernel: 0x40: 0x001214c0 0x00000001 0x00000000 0x00000000
Sep 24 10:01:40 lap kernel: 0x50: 0x00000000 0x00000000 0x00000000 0x00000000
Sep 24 10:01:40 lap kernel: 0x60: 0x00000000 0x00000000 0x00000000 0x00000000
Sep 24 10:01:40 lap kernel: 0x70: 0x00000000 0x00000000 0x00000000 0x00000000
Sep 24 10:01:40 lap kernel: 0x80: 0x0044d0b0 0x00000000 0x00000000 0x00111c12
Sep 24 10:01:40 lap kernel: 0x90: 0x604406c0 0x00000000 0x00000000 0x00000000
Sep 24 10:01:40 lap kernel: 0xa0: 0xfe010001 0x00c00000 0x0000000a 0x00000001
Sep 24 10:01:40 lap kernel: 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
Sep 24 10:01:40 lap kernel: 0xc0: 0x00001000 0x00800080 0x00080004 0x00000000
Sep 24 10:01:40 lap kernel: 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
Sep 24 10:01:40 lap kernel: 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
Sep 24 10:01:40 lap kernel: 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
[ ... ]
Sep 24 10:01:40 lap kernel: cbb0: Unsupported card type detected
[ ... ]
And booting with NEWCARD (card inserted) it stops at "start_init: trying /sbin/init",
then if I close and open the lid, the following is shown:
Sep 26 16:20:02 lap kernel: acpi_lid0: Lid closed
Sep 26 16:20:02 lap kernel: fwohci0: fwohci_pci_suspend
Sep 26 16:23:36 lap kernel: pcib0: matched entry for 0.29.INTA (source \_SB_.PCI0.LPCB.LNKA)
Sep 26 16:23:36 lap kernel: pcib0: slot 29 INTA is routed to irq 10
Sep 26 16:23:36 lap kernel: pcib0: matched entry for 0.29.INTB (source \_SB_.PCI0.LPCB.LNKD)
Sep 26 16:23:36 lap kernel: pcib0: slot 29 INTB is routed to irq 11
Sep 26 16:23:36 lap kernel: pcib0: matched entry for 0.29.INTC (source \_SB_.PCI0.LPCB.LNKC)
Sep 26 16:23:36 lap kernel: pcib0: slot 29 INTC is routed to irq 11
Sep 26 16:23:36 lap kernel: pcib0: matched entry for 0.31.INTB (source \_SB_.PCI0.LPCB.LNKB)
Sep 26 16:23:36 lap kernel: pcib0: slot 31 INTB is routed to irq 11
Sep 26 16:23:36 lap kernel: pcib0: matched entry for 0.31.INTB (source \_SB_.PCI0.LPCB.LNKB)
Sep 26 16:23:36 lap kernel: pcib0: slot 31 INTB is routed to irq 11
Sep 26 16:23:36 lap kernel: pci_cfgintr_valid: BIOS irq 10 is valid
Sep 26 16:23:36 lap kernel: pci_cfgintr: 1:0 INTA BIOS irq 10
Sep 26 16:23:36 lap kernel: pcib2: matched entry for 2.0.INTA (source \_SB_.PCI0.LPCB.LNKB)
Sep 26 16:23:36 lap kernel: pcib2: slot 0 INTA is routed to irq 11
Sep 26 16:23:36 lap kernel: pcib2: matched entry for 2.1.INTA (source \_SB_.PCI0.LPCB.LNKD)
Sep 26 16:23:36 lap kernel: pcib2: slot 1 INTA is routed to irq 11
Sep 26 16:23:36 lap kernel: pcib2: matched entry for 2.2.INTA (source \_SB_.PCI0.LPCB.LNKC)
Sep 26 16:23:36 lap kernel: pcib2: slot 2 INTA is routed to irq 11
Sep 26 16:23:36 lap kernel: pcib2: matched entry for 2.3.INTA (source \_SB_.PCI0.LPCB.LNKC)
Sep 26 16:23:36 lap kernel: pcib2: slot 3 INTA is routed to irq 11
Sep 26 16:23:36 lap kernel: fwohci0: fwohci_pci_resume: power_state = 0x00000000
Sep 26 16:23:36 lap kernel: fwohci0: latency timer 128 -> 128.
Sep 26 16:23:36 lap kernel: fwohci0: cache size 8 -> 8.
Sep 26 16:23:36 lap kernel: fwohci0: resetting OHCI...done (loop=0)
Sep 26 16:23:36 lap kernel: fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
Sep 26 16:23:36 lap kernel: fwohci0: fwphy_rddata: 0x3 loop=1, retry=0
Sep 26 16:23:36 lap kernel: fwohci0: Phy 1394a available S400, 2 ports.
Sep 26 16:23:36 lap kernel: fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
Sep 26 16:23:36 lap kernel: fwohci0: Enable 1394a Enhancements
Sep 26 16:23:36 lap kernel: fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
Sep 26 16:23:36 lap kernel: fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
Sep 26 16:23:36 lap kernel: fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
Sep 26 16:23:36 lap last message repeated 2 times
Sep 26 16:23:36 lap kernel: fwohci0: Link S400, max_rec 2048 bytes.
Sep 26 16:23:36 lap kernel: fwohci0: BUS_OPT 0xf064a032 -> 0xf864a032
Sep 26 16:23:36 lap kernel: sbp_post_busreset
Sep 26 16:23:36 lap kernel: fwohci0: fwohci_set_intr: 1
Sep 26 16:23:36 lap kernel: fwohci0: Initiate bus reset
Sep 26 16:23:36 lap kernel: fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
Sep 26 16:23:36 lap kernel: fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
Sep 26 16:23:36 lap kernel: wakeup from sleeping state (slept 00:03:33)
Sep 26 16:23:36 lap kernel: ata0: resetting devices ..
Sep 26 16:23:36 lap kernel: ata0: reset tp1 mask=03 ostat0=50 ostat1=00
Sep 26 16:23:36 lap kernel: ad0: stat=0x50 err=0x01 lsb=0x00 msb=0x00
Sep 26 16:23:36 lap kernel: ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
Sep 26 16:23:36 lap kernel: ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
Sep 26 16:23:36 lap kernel: fwohci0: BUS reset
Sep 26 16:23:36 lap kernel: sbp_post_busreset
Sep 26 16:23:36 lap kernel: fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
Sep 26 16:23:36 lap kernel: firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
Sep 26 16:23:36 lap kernel: fwohci0: fw_set_bus_manager: 0->0 (loop=0)
Sep 26 16:23:36 lap kernel: firewire0: bus manager 0 (me)
Sep 26 16:23:36 lap kernel: send phy_config root_node=-1 gap_count=5
Sep 26 16:23:36 lap kernel: fwohci0: start AT DMA status=0
Sep 26 16:23:36 lap kernel: Current DB 0
Sep 26 16:23:36 lap kernel: ch = 0
Sep 26 16:23:36 lap kernel: Current OP KEY INT BR len Addr Depend Stat: Cnt
Sep 26 16:23:36 lap kernel: 00765080 OUTM ST0 NEV NEV 0 00000000 00000000 0000:0000 Nostat
Sep 26 16:23:36 lap last message repeated 8 times
Sep 26 16:23:36 lap kernel: fwohci0: unrecoverable error
Sep 26 16:23:36 lap kernel: acpi_lid0: Lid opened
Sep 26 16:23:36 lap kernel: ad0: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
Sep 26 16:23:36 lap kernel: done
Sep 26 16:23:36 lap kernel: ata1: resetting devices ..
Sep 26 16:23:36 lap kernel: ata1: reset tp1 mask=03 ostat0=50 ostat1=00
Sep 26 16:23:36 lap kernel: acd0: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
Sep 26 16:23:36 lap kernel: ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
Sep 26 16:23:36 lap kernel: ata1: reset tp2 mask=03 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
Sep 26 16:23:36 lap kernel: acd0: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
Sep 26 16:23:36 lap kernel: done
Sep 26 16:23:36 lap kernel: atkbd: the current kbd controller command byte 0047
Sep 26 16:23:36 lap kernel: atkbd: keyboard ID 0x41ab (2)
Sep 26 16:23:36 lap kernel: kbdc: RESET_KBD return code:00fa
Sep 26 16:23:36 lap kernel: kbdc: RESET_KBD status:00aa
Sep 26 16:23:36 lap kernel: bus_explore done
Sep 26 16:23:36 lap kernel: sbp_post_explore (sbp_cold=0)
Sep 26 16:23:36 lap kernel: acpi_cmbat0: battery initialization start
Sep 26 16:23:36 lap kernel: cbb0: Unsupported card type detected
Sep 26 16:23:36 lap kernel: acpi_cmbat0: battery initialization done, tried 1 times
Again I have to remove batteries to reboot.
Following the contents of my dmesg.boot (OLDCARD, no card inserted):
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #0: Sat Sep 27 12:18:58 CEST 2003
mneumann at lap.neumann.all:/usr/src/sys/i386/compile/LAPTOP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0534000.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc053421c.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc05342c8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0534374.
Calibrating clock(s) ... i8254 clock: 1193212 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 598063372 Hz
CPU: Intel(R) Pentium(R) M processor 1300MHz (598.06-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x695 Stepping = 5
Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x000000000055b000 - 0x000000001f6c9fff, 521596928 bytes (127343 pages)
avail memory = 515690496 (491 MB)
bios32: Found BIOS32 Service Directory header at 0xc00e7050
bios32: Entry = 0xe9c10 (c00e9c10) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xe7000+0x2c24
pnpbios: Found PnP BIOS data at 0xc00ff020
pnpbios: Entry = eb000:3cd8 Rev = 1.0
pnpbios: Event flag at eb01e
pnpbios: OEM ID 8224744e
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INSYDE RSDT_000> on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=33408086)
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fe890
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 29 A 0x60 3 7 10 11
embedded 0 29 B 0x63 3 7 10 11
embedded 0 29 C 0x62 3 7 10 11
embedded 0 29 D 0x6b 3 7 10 11
embedded 0 31 A 0x62 3 7 10 11
embedded 0 31 B 0x61 3 7 10 11
embedded 1 0 A 0x60 3 7 10 11
embedded 1 0 B 0x61 3 7 10 11
embedded 2 0 A 0x61 3 7 10 11
embedded 2 1 A 0x63 3 7 10 11
embedded 2 2 A 0x62 3 7 10 11
embedded 2 2 B 0x63 3 7 10 11
embedded 2 3 A 0x62 3 7 10 11
embedded 2 6 A 0x63 3 7 10 11
embedded 2 6 B 0x62 3 7 10 11
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 0xfff80000-0xffffffff,0xffb80000-0xffbfffff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.LPCB.LNKA irq 10: [ 5 7 9 10 11] low,level,sharable 0.1.0
\\_SB_.PCI0.LPCB.LNKB irq 11: [ 5 7 9 10 11] low,level,sharable 0.1.1
\\_SB_.PCI0.LPCB.LNKC irq 11: [ 5 7 9 10 11] low,level,sharable 0.31.0
\\_SB_.PCI0.LPCB.LNKB irq 11: [ 5 7 9 10 11] low,level,sharable 0.31.1
\\_SB_.PCI0.LPCB.LNKA irq 10: [ 5 7 9 10 11] low,level,sharable 0.29.0
\\_SB_.PCI0.LPCB.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.29.1
\\_SB_.PCI0.LPCB.LNKC irq 11: [ 5 7 9 10 11] low,level,sharable 0.29.2
\\_SB_.PCI0.LPCB.LNKH irq 11: [ 5 7 9 10 11] low,level,sharable 0.29.3
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LPCB.LNKA irq 10: [ 5 7 9 10 11] low,level,sharable 0.1.0
\\_SB_.PCI0.LPCB.LNKB irq 11: [ 5 7 9 10 11] low,level,sharable 0.1.1
\\_SB_.PCI0.LPCB.LNKC irq 11: [ 5 7 9 10 11] low,level,sharable 0.31.0
\\_SB_.PCI0.LPCB.LNKB irq 11: [ 5 7 9 10 11] low,level,sharable 0.31.1
\\_SB_.PCI0.LPCB.LNKA irq 10: [ 5 7 9 10 11] low,level,sharable 0.29.0
\\_SB_.PCI0.LPCB.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.29.1
\\_SB_.PCI0.LPCB.LNKC irq 11: [ 5 7 9 10 11] low,level,sharable 0.29.2
\\_SB_.PCI0.LPCB.LNKH irq 11: [ 5 7 9 10 11] low,level,sharable 0.29.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base b0000000, size 26, enabled
found-> vendor=0x8086, dev=0x3340, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3341, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001200, size 5, enabled
pcib0: matched entry for 0.29.INTA (source \\_SB_.PCI0.LPCB.LNKA)
pcib0: slot 29 INTA is routed to irq 10
found-> vendor=0x8086, dev=0x24c2, revid=0x03
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type 4, range 32, base 00001600, size 5, enabled
pcib0: matched entry for 0.29.INTB (source \\_SB_.PCI0.LPCB.LNKD)
pcib0: slot 29 INTB is routed to irq 11
found-> vendor=0x8086, dev=0x24c4, revid=0x03
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type 4, range 32, base 00001700, size 5, enabled
pcib0: matched entry for 0.29.INTC (source \\_SB_.PCI0.LPCB.LNKC)
pcib0: slot 29 INTC is routed to irq 11
found-> vendor=0x8086, dev=0x24c7, revid=0x03
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
found-> vendor=0x8086, dev=0x2448, revid=0x83
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24cc, revid=0x03
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00000000, size 3, enabled
map[14]: type 4, range 32, base 00000000, size 2, enabled
map[18]: type 4, range 32, base 00000000, size 3, enabled
map[1c]: type 4, range 32, base 00000000, size 2, enabled
map[20]: type 4, range 32, base 00001100, size 4, enabled
found-> vendor=0x8086, dev=0x24ca, revid=0x03
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00001400, size 5, enabled
found-> vendor=0x8086, dev=0x24c3, revid=0x03
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
map[10]: type 4, range 32, base 0000e000, size 8, enabled
map[14]: type 4, range 32, base 0000e100, size 6, enabled
map[18]: type 1, range 32, base f0000400, size 9, enabled
map[1c]: type 1, range 32, base f0000600, size 8, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.PCI0.LPCB.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found-> vendor=0x8086, dev=0x24c5, revid=0x03
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000e200, size 8, enabled
map[14]: type 4, range 32, base 0000e300, size 7, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.PCI0.LPCB.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found-> vendor=0x8086, dev=0x24c6, revid=0x03
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
agp0: <Intel 82855 host to AGP bridge> mem 0xb0000000-0xb3ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xdfff
pcib1: memory decode 0xe0000000-0xefffffff
pcib1: prefetched decode 0xa0000000-0xafffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base a8000000, size 27, enabled
map[14]: type 4, range 32, base 0000c100, size 8, enabled
map[18]: type 1, range 32, base e0010000, size 16, enabled
pci_cfgintr_valid: BIOS irq 10 is valid
pci_cfgintr: 1:0 INTA BIOS irq 10
found-> vendor=0x1002, dev=0x4c66, revid=0x01
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x02b0, cachelnsz=4 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
drm0: <ATI Radeon Lf R250 Mobility 9000 M9> port 0xc100-0xc1ff mem 0xe0010000-0xe001ffff,0xa8000000-0xafffffff irq 10 at device 0.0 on pci1
info: [drm] AGP at 0xb0000000 64MB
info: [drm] Initialized radeon 1.9.0 20020828 on minor 0
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1200-0x121f irq 10 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1600-0x161f irq 11 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: Cypress Sem PS2/USB Browser Combo Mouse, rev 1.00/0.00, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1700-0x171f irq 11 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xa000-0xbfff
pcib2: memory decode 0xd0000000-0xdfffffff
pcib2: prefetched decode 0x90000000-0x9fffffff
---- initial configuration ------------------------
\\_SB_.PCI0.LPCB.LNKB irq 11: [ 5 7 9 10 11] low,level,sharable 2.0.0
\\_SB_.PCI0.LPCB.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.0
\\_SB_.PCI0.LPCB.LNKC irq 11: [ 5 7 9 10 11] low,level,sharable 2.2.0
\\_SB_.PCI0.LPCB.LNKC irq 11: [ 5 7 9 10 11] low,level,sharable 2.3.0
\\_SB_.PCI0.LPCB.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.6.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LPCB.LNKB irq 11: [ 5 7 9 10 11] low,level,sharable 2.0.0
\\_SB_.PCI0.LPCB.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.0
\\_SB_.PCI0.LPCB.LNKC irq 11: [ 5 7 9 10 11] low,level,sharable 2.2.0
\\_SB_.PCI0.LPCB.LNKC irq 11: [ 5 7 9 10 11] low,level,sharable 2.3.0
\\_SB_.PCI0.LPCB.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.6.0
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 32, base d0001800, size 11, enabled
map[14]: type 4, range 32, base 0000a100, size 7, enabled
pcib2: matched entry for 2.0.INTA (source \\_SB_.PCI0.LPCB.LNKB)
pcib2: slot 0 INTA is routed to irq 11
found-> vendor=0x1106, dev=0x3044, revid=0x80
bus=2, slot=0, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0210, cachelnsz=4 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 4, range 32, base 0000a000, size 8, enabled
map[14]: type 1, range 32, base d0001000, size 8, enabled
pcib2: matched entry for 2.1.INTA (source \\_SB_.PCI0.LPCB.LNKD)
pcib2: slot 1 INTA is routed to irq 11
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=2, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base d0000000, size 12, enabled
pcib2: matched entry for 2.2.INTA (source \\_SB_.PCI0.LPCB.LNKC)
pcib2: slot 2 INTA is routed to irq 11
found-> vendor=0x8086, dev=0x1043, revid=0x04
bus=2, slot=2, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x02 (500 ns), maxlat=0x22 (8500 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1524, dev=0x1410, revid=0x00
bus=2, slot=3, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
fwohci0: <VIA VT6306> port 0xa100-0xa17f mem 0xd0001800-0xd0001fff irq 11 at device 0.0 on pci2
fwohci0: latency timer 128 -> 128.
fwohci0: cache size 4 -> 8.
pcib2: device fwohci0 requested decoded memory range 0xd0001800-0xd0001fff
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:02:3f:34:32:00:0c:39
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x3 loop=1, retry=0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xf800a202 -> 0xf800a202
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3f:00:0c:39
fwe0: bpf attached
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach (cold=1)
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
fwohci0: BUS reset
sbp_post_busreset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
pcib2: device rl0 requested decoded I/O range 0xa000-0xa0ff
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xd0001000-0xd00010ff irq 11 at device 1.0 on pci2
pcib2: device rl0 requested decoded I/O range 0xa000-0xa0ff
rl0: Ethernet address: 00:02:3f:b7:1e:d3
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
pci2: <network> at device 2.0 (no driver attached)
Found unknown YENTA PCI-CardBus Bridge devid 0x14101524
pcib2: matched entry for 2.3.INTA (source \\_SB_.PCI0.LPCB.LNKC)
pcib2: slot 3 INTA is routed to irq 11
pcic0: <YENTA PCI-CardBus Bridge> irq 11 at device 3.0 on pci2
pcib2: device pcic0 requested decoded memory range 0xd0000000-0xdfffffff
pcic0: PCI Memory allocated: 0xd0000000
pcic0: PCI Configuration space:
0x00: 0x14101524 0x02100007 0x06070000 0x00024000
0x10: 0xd0000000 0x020000a0 0x40000002 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x0760010b
0x40: 0x001214c0 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0044d0b0 0x00000000 0x00000000 0x00111c12
0x90: 0x604406c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe010001 0x00c00000 0x00000008 0x00000001
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00001000 0x00800080 0x00080004 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pccard0: <PC Card 16-bit bus (classic)> on pcic0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1100-0x110f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0xe100-0xe13f,0xe000-0xe0ff mem 0xf0000600-0xf00006ff,0xf0000400-0xf00005ff irq 11 at device 31.5 on pci0
pcm0: <Avance Logic ALC202 AC97 Codec (id = 0x414c4740)>
pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Realtek 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, AMAP, reserved 4
pcm0: sndbuf_setmap 7c9000, 4000; 0xdc3bb000 -> 7c9000
pcm0: sndbuf_setmap 7d4000, 4000; 0xdc3bf000 -> 7d4000
pci0: <simple comms> at device 31.6 (no driver attached)
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0067
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00001000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
acpi_ec0: <embedded controller: GPE 0x1c> port 0x66,0x62 on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
sio0: irq maps: 0x801 0x809 0x801 0x801
sio0 port 0x230-0x237,0x2f8-0x2ff irq 3 drq 3 on acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
pcic: pcic0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe6000-0xe6fff,0xe0000-0xe17ff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83
97 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f
98 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83
97 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f
98 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 598063372 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata1: spurious interrupt - status=0x00 error=0x01
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
00742000 OUTL ST2 ALL ALL 12 00000000 00742080 8411:000a RUN,ACTIVE, ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_acad0: acline initialization start
acpi_ec0: info: new max delay is 115 us
acpi_ec0: info: new max delay is 600 us
system power profile changed to 'economy'
acpi_cpu0: set speed to 50.0%
acpi_acad0: Off Line
acpi_cmbat0: battery initialization start
acpi_ec0: info: new max delay is 700 us
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
acpi_cmbat0: battery initialization done, tried 1 times
ad0: setting UDMA100 on Intel ICH4 chip
GEOM: create disk ad0 dp=0xc4204270
ad0: <HITACHI_DK23EA-30/00K4A0C1> ATA-5 disk at ata0-master
ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
acd0: setting PIO4 on Intel ICH4 chip
acd0: <QSI CD-RW/DVD-ROM SBW-242/UX08> CDRW drive at ata1 as master
acd0: read 689KB/s (4126KB/s) write 4126KB/s (4126KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: measured ac97 link rate at 47998 Hz, will use 48000 Hz
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:52428033
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 26843152896 end 26843185151
GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s1b, start 268435456 length 1052033024 end 1320468479
GEOM: Configure ad0s1c, start 0 length 26843152896 end 26843152895
GEOM: Configure ad0s1d, start 1320468480 length 5368709120 end 6689177599
GEOM: Configure ad0s1e, start 6689177600 length 8589934592 end 15279112191
GEOM: Configure ad0s1f, start 15279112192 length 11564040704 end 26843152895
bus_explore done
sbp_post_explore (sbp_cold=2)
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
start_init: trying /sbin/init
acpi_ec0: info: new max delay is 11000 us
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
Linux ELF exec handler installed
linprocfs registered
pcib2: device pccard0 requested decoded memory range 0xd0000-0xd0000
>How-To-Repeat:
Insert Compaq Netelligent 10/100 PC Card.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list