kern/57174: 4.9-PRERELEASE panic: ata_dmasetup: transfer active on
this device!
Eugene Grosbein
eugen at kuzbass.ru
Wed Sep 24 08:50:39 PDT 2003
>Number: 57174
>Category: kern
>Synopsis: 4.9-PRERELEASE panic: ata_dmasetup: transfer active on this device!
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Sep 24 08:50:17 PDT 2003
>Closed-Date:
>Last-Modified:
>Originator: Eugene Grosbein
>Release: FreeBSD
>Organization:
Svyaz Service JSC
>Environment:
System: FreeBSD grosbein.pp.ru 4.9-PRERELEASE FreeBSD 4.9-PRERELEASE #20: Wed Sep 24 21:03:53 KRAST 2003 eu at grosbein.pp.ru:/usr/local/obj/usr/local/src/sys/DADV i386
CPUTYPE=i686 and no other optimizations
>Description:
Today I've upgraded my early 4.9-PRERELEASE to RELENG_4,
after I've received 4.9-BETA announcement.
Full cycle was completed: make builworld, make kernel,
make installworld, mergemaster.
I decided to make index of my local copy of Maxim Moshkow
library (4.6Gb of texts) using following command:
glimpseindex -H /home/moshkow/.g -B -b -f -M 256 -n -t /home/moshkow
I use glimpse-4.12.6 that was built 17 Jun 2002 using ports.
It started to work making heavy load to my system,
both of CPU and hard drive. Meantime I went online
using pppd and started to surf the web using lynx.
Suddenly my previously rock-stable system crashed.
Here comes GDB backtrace.
GNU gdb 4.18 (FreeBSD)
Copyright 1998 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i386-unknown-freebsd"...Deprecated bfd_read called at /usr/local/src/gnu/usr.bin/binutils/gdb/../../../../contrib/gdb/gdb/dbxread.c line 2627 in elfstab_build_psymtabs
Deprecated bfd_read called at /usr/local/src/gnu/usr.bin/binutils/gdb/../../../../contrib/gdb/gdb/dbxread.c line 933 in fill_symbuf
IdlePTD at phsyical address 0x003c5000
initial pcb at physical address 0x0031baa0
panicstr: ata_dmasetup: transfer active on this device!
panic messages:
---
panic: ata_dmasetup: transfer active on this device!
syncing disks... ad2: WRITE command timeout tag=1 serv=0 - resetting
ad2: invalidating queued requests
ata1: resetting devices .. ad2: invalidating queued requests
done
ad2: no request for tag=2
ad2: invalidating queued requests
67 43 43 43 43 43 43 43 59 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43 43 ad2: READ command timeout tag=2 serv=0 - resetting
ad2: invalidating queued requests
ata1: resetting devices .. ad2: invalidating queued requests
done
43 ad2: no request for tag=2
ad2: invalidating queued requests
0xc7c562f8 1: dev:#ad/0x20017, flags:20000000, blkno:27213840, lblkno:27213840
0xc7c3d388 2: dev:#ad/0x20017, flags:20000000, blkno:27249392, lblkno:27249392
0xc7c3bc30 3: dev:#ad/0x20017, flags:20000000, blkno:26315504, lblkno:26315504
0xc7c2810c 4: dev:#ad/0x20017, flags:20000000, blkno:26402832, lblkno:26402832
0xc7c260a0 5: dev:#ad/0x20017, flags:20000000, blkno:27123728, lblkno:27123728
0xc7c1cb7c 6: dev:#ad/0x20017, flags:20000000, blkno:26697168, lblkno:26697168
0xc7c0ef04 7: dev:#ad/0x20017, flags:20000000, blkno:26729952, lblkno:26729952
0xc7c0d8f8 8: dev:#ad/0x20017, flags:20000000, blkno:26348288, lblkno:26348288
0xc7c09588 9: dev:#ad/0x20017, flags:20000000, blkno:16605456, lblkno:16605456
0xc7c00978 10: dev:#ad/0x20017, flags:20000000, blkno:26312720, lblkno:26312720
0xc7bfe674 11: dev:#ad/0x20017, flags:20000000, blkno:27310672, lblkno:27310672
0xc7bd2cbc 12: dev:#ad/0x20017, flags:21021024, blkno:16580688, lblkno:16580688
0xc7bd1be0 13: dev:#ad/0x20017, flags:20000000, blkno:27037472, lblkno:27037472
0xc7b98d78 14: dev:#ad/0x20017, flags:20000000, blkno:26763280, lblkno:26763280
giving up on 14 buffers
Uptime: 18m25s
/dev/vmmon: Module vmmon: unloaded
dumping to dev #ad/0x20011, offset 128
dump ata1: resetting devices .. ad2: invalidating queued requests
done
319 318 317 316 315 314 313 312 311 310 309 308 307 306 305 304 303 302 301 300 299 298 297 296 295 294 293 292 291 290 289 288 287 286 285 284 283 282 281 280 279 278 277 276 275 274 273 272 271 270 269 268 267 266 265 264 263 262 261 260 259 258 257 256 255 254 253 252 251 250 249 248 247 246 245 244 243 242 241 240 239 238 237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220 219 218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143 142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 6!
3 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
---
#0 dumpsys () at /usr/local/src/sys/kern/kern_shutdown.c:487
487 if (dumping++) {
(kgdb) bt
#0 dumpsys () at /usr/local/src/sys/kern/kern_shutdown.c:487
#1 0xc0161278 in boot (howto=256)
at /usr/local/src/sys/kern/kern_shutdown.c:316
#2 0xc01616c5 in panic (
fmt=0xc0291120 "ata_dmasetup: transfer active on this device!")
at /usr/local/src/sys/kern/kern_shutdown.c:595
#3 0xc01335fc in ata_dmastart (atadev=0xc13e5530,
data=0xcc5da000 <Address 0xcc5da000 out of bounds>, count=131072, dir=1)
at /usr/local/src/sys/dev/ata/ata-dma.c:1374
#4 0xc013556f in ad_service (adp=0xc1402400, change=1)
at /usr/local/src/sys/dev/ata/ata-disk.c:787
#5 0xc0134c6f in ad_transfer (request=0xc20b4f80)
at /usr/local/src/sys/dev/ata/ata-disk.c:499
#6 0xc012bda7 in ata_start (ch=0xc13e5500)
at /usr/local/src/sys/dev/ata/ata-all.c:681
#7 0xc01346c8 in adstrategy (bp=0xc7b91b58)
at /usr/local/src/sys/dev/ata/ata-disk.c:307
#8 0xc016b501 in diskstrategy (bp=0xc7b91b58)
at /usr/local/src/sys/kern/subr_disk.c:251
#9 0xc019ce4f in spec_strategy (ap=0xcf70acb4)
at /usr/local/src/sys/miscfs/specfs/spec_vnops.c:479
#10 0xc019c7f5 in spec_vnoperate (ap=0xcf70acb4)
at /usr/local/src/sys/miscfs/specfs/spec_vnops.c:119
#11 0xc0202e3d in ufs_vnoperatespec (ap=0xcf70acb4)
---Type <return> to continue, or q <return> to quit---
at /usr/local/src/sys/ufs/ufs/ufs_vnops.c:2394
#12 0xc020270d in ufs_strategy (ap=0xcf70acf8) at vnode_if.h:944
#13 0xc0202e05 in ufs_vnoperate (ap=0xcf70acf8)
at /usr/local/src/sys/ufs/ufs/ufs_vnops.c:2376
#14 0xc0188c07 in bwrite (bp=0xc7b91b58) at vnode_if.h:944
#15 0xc018e95b in vop_stdbwrite (ap=0xcf70ad34)
at /usr/local/src/sys/kern/vfs_default.c:344
#16 0xc018e771 in vop_defaultop (ap=0xcf70ad34)
at /usr/local/src/sys/kern/vfs_default.c:152
#17 0xc0202e05 in ufs_vnoperate (ap=0xcf70ad34)
at /usr/local/src/sys/ufs/ufs/ufs_vnops.c:2376
#18 0xc0188fa6 in bawrite (bp=0xc7b91b58) at vnode_if.h:1193
#19 0xc018df77 in cluster_wbuild (vp=0xcfa43cc0, size=8192, start_lbn=23452,
len=16) at /usr/local/src/sys/kern/vfs_cluster.c:945
#20 0xc018da92 in cluster_write (bp=0xc7c67c64, filesize=192118784,
seqcount=127) at /usr/local/src/sys/kern/vfs_cluster.c:576
#21 0xc01fc33f in ffs_write (ap=0xcf70ae74)
at /usr/local/src/sys/ufs/ufs/ufs_readwrite.c:570
#22 0xc0198c42 in vn_write (fp=0xc1f65c80, uio=0xcf70aee0, cred=0xc195b700,
flags=0, p=0xcf63f220) at vnode_if.h:363
#23 0xc0171096 in dofilewrite (p=0xcf63f220, fp=0xc1f65c80, fd=11,
buf=0x18570000, nbyte=8192, offset=-1, flags=0)
at /usr/local/src/sys/sys/file.h:163
#24 0xc0170f47 in write (p=0xcf63f220, uap=0xcf70af80)
---Type <return> to continue, or q <return> to quit---
at /usr/local/src/sys/kern/sys_generic.c:329
#25 0xc0272301 in syscall2 (frame={tf_fs = 408354863, tf_es = 672333871,
tf_ds = -1078001617, tf_edi = 408354816, tf_esi = 672345944,
tf_ebp = -1077958108, tf_isp = -814698540, tf_ebx = 672270316,
tf_edx = 672345944, tf_ecx = 0, tf_eax = 4, tf_trapno = 0, tf_err = 2,
tf_eip = 672229000, tf_cs = 31, tf_eflags = 659, tf_esp = -1077958152,
tf_ss = 47}) at /usr/local/src/sys/i386/i386/trap.c:1175
#26 0xc0265345 in Xint0x80_syscall ()
#27 0x2811432d in ?? ()
#28 0x28114295 in ?? ()
#29 0x281110a6 in ?? ()
#30 0x280fbcb5 in ?? ()
#31 0x8055146 in ?? ()
#32 0x8051b68 in ?? ()
#33 0x8052603 in ?? ()
#34 0x8050510 in ?? ()
#35 0x804ad64 in ?? ()
#36 0x8049361 in ?? ()
(kgdb) q
Here comes /var/run/dmesg.boot
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-PRERELEASE #20: Wed Sep 24 21:03:53 KRAST 2003
eu at grosbein.pp.ru:/usr/local/obj/usr/local/src/sys/DADV
Timecounter "i8254" frequency 1193165 Hz
CPU: Intel Celeron (902.03-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 335478784 (327616K bytes)
config> flags atkbd 0x0
config> quit
avail memory = 322236416 (314684K bytes)
Preloaded elf kernel "kernel" at 0xc03a6000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03a609c.
VESA: v2.0, 4096k memory, flags:0x1, mode table:0xc00c0e38 (c0000e38)
VESA: S3 Incorporated Trio3D.
Pentium Pro MTRR support enabled
Using $PIR table, 8 entries at 0xc00fdef0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 Trio3D graphics accelerator> at 0.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uscanner0: Hewlett-Packard HP ScanJet 2200C, rev 1.10/1.00, addr 2
uhid0: American Power Conversion Back-UPS 500 FW: 6.5.I USB FW: c1 , rev 1.10/1.00, addr 3, iclass 3/0
intpm0: <Intel 82371AB Power management controller> port 0x5000-0x500f irq 9 at device 7.3 on pci0
intpm0: I/O mapped 5000
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 4000
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xe400-0xe43f mem 0xe5000000-0xe50fffff,0xe5100000-0xe5100fff irq 10 at device 15.0 on pci0
fxp0: Ethernet address 00:90:27:a7:5c:72
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model NetMouse/NetScroll Optical, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <24 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 610C> MLC,PCL,PML
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pcm0: <Yamaha OPL-SAx> at port 0x220-0x22f,0x530-0x537,0x388-0x38f,0x330-0x331,0x370-0x371 irq 5 drq 0,1 on isa0
DUMMYNET initialized (011031)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
IPsec: Initialized Security Association Processing.
ad0: 6149MB <WDC AC26400B> [13328/15/63] at ata0-master UDMA33
ad2: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata1-master tagged UDMA33
acd0: CD-RW <SONY CD-RW CRX140E> at ata0-slave UDMA33
Mounting root from ufs:/dev/ad2s1a
WARNING: / was not properly dismounted
Now kernel config file:
#for strings -n 3 /kernel | grep ^___ | sed -e 's/^___//' > MYKERNEL
options INCLUDE_CONFIG_FILE
machine i386
#cpu I386_CPU
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
options CPU_ENABLE_SSE #enables SSE/MMX2 instructions support.
ident DADV
maxusers 128
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
#options MATH_EMULATE #Support for x87 emulation
options CLK_CALIBRATION_LOOP
options "CLK_USE_I8254_CALIBRATION"
options CLK_USE_TSC_CALIBRATION
options INET #InterNETworking
#options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
#options MFS #Memory Filesystem
#options MD_ROOT #MD is a potential root device
#options NFS #Network Filesystem
#options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
#options CD9660 #ISO 9660 Filesystem
#options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
#options EXT2FS #Linux ext2 filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options CPU_SUSP_HLT
#options "NO_F00F_HACK"
options USER_LDT
options PPP_BSDCOMP
options PPP_DEFLATE
options PPP_FILTER
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options SHMALL=4097
options SHMMAXPGS=4097
options SHMMAX=(SHMMAXPGS*PAGE_SIZE+1)
options SEMMAP=255
options SEMMNI=235
options SEMMNS=255
options SEMMNU=235
options SEMMSL=255
options SEMOPM=201
options SEMUME=201
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options _KPOSIX_VERSION=199309L
options ICMP_BANDLIM #Rate limit bad replies
#options FDESC
options NSWAPDEV=4
device isa
device eisa
device pci
options AUTO_EOI_1
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
#device fd1 at fdc0 drive 1
# ATA and ATAPI devices
#device ata0 at isa? port IO_WD1 irq 14 flags 0xb0ffb0ff
#device ata1 at isa? port IO_WD2 irq 15 flags 0xb0ffb0ff
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
# Options for atkbd:
options ATKBD_DFLT_KEYMAP # specify the built-in keymap
makeoptions ATKBD_DFLT_KEYMAP="ru.koi8-r.pdwn"
device psm0 at atkbdc? irq 12
device vga0 at isa?
options VESA
options VGA_WIDTH90
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa?
options SC_DFLT_FONT # compile font in
makeoptions SC_DFLT_FONT=cp866
options MAXCONS=24
options SC_HISTORY_SIZE=1000
options SC_MOUSE_CHAR=0x03
#options SC_TWOBUTTON_MOUSE
options SC_PIXEL_MODE
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
#device apm0 at nexus? flags 0x31 # Advanced Power Management
device apm0 at nexus? # Advanced Power Management
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device miibus
device fxp
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
#device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device joy0 at isa? port IO_GAME
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 2 # Kernel SLIP
pseudo-device ppp 2 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty 16 # Pseudo-ttys (telnet etc)
#pseudo-device md # Memory "disks"
pseudo-device gif 4 # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
pseudo-device snp
#pseudo-device vn
pseudo-device gzip # Exec gzipped a.out's
pseudo-device speaker
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
options MSGBUF_SIZE=40960
device pcm
#options QUOTA
options IPFIREWALL
options IPFIREWALL_VERBOSE
#options "IPFIREWALL_VERBOSE_LIMIT=100"
options IPDIVERT
options IPSTEALTH
options DUMMYNET
options SOFTUPDATES
#device smbus0
#device iicbus0
#device iicbb0
#device intpm0
#device smb0 at smbus?
device smbus
#device iicbus
#device iicbb
device intpm
#device alpm
#device ichsmb
device smb
#device ic
#device iic
#device iicsmb
options DDB
options DDB_UNATTENDED
#options LIBMCHAIN
#options LIBICONV
#options NETSMB
#options NETSMBCRYPTO
options RANDOM_IP_ID
#options SMBFS
options UFS_DIRHASH
options PQ_CACHESIZE=128 # color for 128k/16k cache
options SHOW_BUSYBUFS
device uhci
#device ohci
device usb
device uscanner
device ugen
device uhid
device ucom
device tap
#options SHUTDOWN_BEEP
options IPSEC #IP security
options IPSEC_ESP #IP security (crypto; define w/ IPSEC)
options INVARIANTS
options INVARIANT_SUPPORT
Here is /boot/loader.conf
hw.ata.wc=1
hw.ata.ata_dma=1
hw.ata.tags=1
hw.ata.atapi_dma=1
userconfig_script_load="YES"
#uscanner_load="YES"
autoboot_delay=2
rootdevname="/dev/ad0a" # why is it here? do not remember
#if_fxp_load="YES"
>How-To-Repeat:
I'll try to reproduce this after PR will be sent successfully.
>Fix:
Unknown for me.
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list