kern/57085: umass0 problems, with Sony Vio/USB memory stick

Melvyn Sopacua melvyn at webteckies.org
Mon Sep 22 03:40:14 PDT 2003


>Number:         57085
>Category:       kern
>Synopsis:       umass0 problems, with Sony Vio/USB memory stick
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Mon Sep 22 03:40:11 PDT 2003
>Closed-Date:
>Last-Modified:
>Originator:     Melvyn Sopacua
>Release:        FreeBSD 4.8-STABLE i386
>Organization:
>Environment:
System: FreeBSD dreetje.thuisnetwerk.lan 4.8-STABLE FreeBSD 4.8-STABLE #5: Wed Aug 27 13:53:18 CEST 2003 root at dreetje.thuisnetwerk.lan:/usr/obj/usr/src/sys/DREETJE i386

Controller /dev/usb0:
addr 1: self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 powered

	
>Description:
	Timeouts on startup and no da0 device.
	dmesg.boot:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.8-STABLE #5: Wed Aug 27 13:53:18 CEST 2003
    root at dreetje.thuisnetwerk.lan:/usr/obj/usr/src/sys/DREETJE
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU       866MHz (861.69-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 267911168 (261632K bytes)
avail memory = 256331776 (250324K bytes)
Preloaded elf kernel "kernel" at 0xc0434000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fdf30
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82830 host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=3576)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c59 graphics accelerator> at 0.0 irq 9
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f at device 29.2 on pci0
pci_cfgintr_search: linked (0) to configured irq 9 at 0:29:1
pci_cfgintr: 0:29 INTC routed to irq 9
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
umass0: Sony USB Memory Stick Slot, rev 1.10/1.80, addr 2
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
fwohci0: <Texas Instruments TSB43AA22> mem 0xd0200000-0xd0203fff,0xd0205000-0xd02057ff at device 2.0 on pci2
fwohci0: Invalid irq 255
fwohci0: Please switch PNP-OS to 'No' in BIOS
pci_cfgintr_search: linked (0) to configured irq 3 at 2:5:0
pci_cfgintr: 2:2 INTA routed to irq 3
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 08:00:46:03:00:d6:36:f2
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 0a:00:46:d6:36:f2
sbp0: <SBP2/SCSI over firewire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.0 on pci2
pcic0: PCI Memory allocated: 0x88000000
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pci_cfgintr_search: linked (0) to configured irq 3 at 2:2:0
pci_cfgintr: 2:5 INTB routed to irq 3
pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.1 on pci2
pcic1: PCI Memory allocated: 0x88001000
pccard1: <PC Card 16-bit bus (classic)> on pcic1
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x4000-0x403f mem 0xd0204000-0xd0204fff irq 9 at device 8.0 on pci2
fxp0: Ethernet address 08:00:46:26:54:b4
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xd0000000-0xd00003ff at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3
pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 9 at device 31.5 on pci0
pcm0: <Analog Devices AD1881A ac97 codec>
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6
eisa0: <EISA bus> on motherboard
eisa0: unknown card @H at 0000 (0x01000000) at slot 1
orm0: <Option ROMs> at iomem 0xc0000-0xcefff,0xd8000-0xdbfff,0xdc000-0xdffff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ata1-slave: ATAPI identify retries exceeded
ad0: 14403MB <HITACHI_DK23CA-15> [29264/16/63] at ata0-master UDMA100
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2502> at ata1-master PIO4
umass0: CBI reset failed, TIMEOUT
umass0: CBI bulk-in stall clear failed, TIMEOUT
umass0: CBI bulk-out stall clear failed, TIMEOUT
umass0: CBI reset failed, TIMEOUT
umass0: CBI bulk-in stall clear failed, TIMEOUT
umass0: CBI bulk-out stall clear failed, TIMEOUT
umass0: CBI reset failed, TIMEOUT
umass0: CBI bulk-in stall clear failed, TIMEOUT
umass0: CBI bulk-out stall clear failed, TIMEOUT
umass0: CBI reset failed, TIMEOUT
umass0: CBI bulk-in stall clear failed, TIMEOUT
umass0: CBI bulk-out stall clear failed, TIMEOUT
umass0: CBI reset failed, TIMEOUT
umass0: CBI bulk-in stall clear failed, TIMEOUT
umass0: CBI bulk-out stall clear failed, TIMEOUT
Mounting root from ufs:/dev/ad0s2a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TOSHIBA DVD-ROM SD-C2502 1513> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: cd present [56239 x 2048 byte records]

usbdevs -v is above.
camcontrol reports a non-existent da0 device.
>How-To-Repeat:
	boot the machine.
>Fix:

	unknown.
	option DA_OLD_QUIRCKS has no influence

>Release-Note:
>Audit-Trail:
>Unformatted:


More information about the freebsd-bugs mailing list