kern/59792: 5.2-BETAA softupdates enabled on / kills
installation
Simon L. Nielsen
simon at FreeBSD.org
Sat Nov 29 13:40:20 PST 2003
The following reply was made to PR kern/59792; it has been noted by GNATS.
From: "Simon L. Nielsen" <simon at FreeBSD.org>
To: freebsd-gnats-submit at FreeBSD.org
Cc: dsf at globalcrossing.net
Subject: Re: kern/59792: 5.2-BETAA softupdates enabled on / kills installation
Date: Sat, 29 Nov 2003 22:31:33 +0100
--APlYHCtpeOhspHkB
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Just a little followup...
This still happens for me with 5.2-BETA-20031129-JPSNAP. I attached a
serial console to get a non-transcribed traceback and complete dmesg.
Both should be attached.
BTW I install to ad4, though I don't think that matters.
--
Simon L. Nielsen
FreeBSD Documentation Team
Whithout GPG so GNATS doesn't mess up files
--APlYHCtpeOhspHkB
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="5.2-install-trace.cap"
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x1c
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc06651be
stack pointer = 0x10:0xcdecaad8
frame pointer = 0x10:0xcdecaaf4
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 44 (bufdaemon)
kernel: type 12 trap, code=0
Stopped at _mtx_assert+0x4e: movl 0x1c(%ebx),%eax
db> trace
_mtx_assert(0,1,c08b0993,63e,1000) at _mtx_assert+0x4e
vm_page_set_invalid(c1796c78,0,1000,554,0) at vm_page_set_invalid+0x35
brelse(c800ec98,0,cdecab90,c3218900,c1ab1b40) at brelse+0x52b
softdep_disk_io_initiation(c800e928,c1ab1b40,cdecabc4,246,c089efd9) at softdep_disk_io_initiation+0xc4
spec_xstrategy(c332da28,c800e928,d5b,c089efd9,c800e928) at spec_xstrategy+0x117
spec_specstrategy(cdecabf8,f4,c17527d0,4,c800e928) at spec_specstrategy+0x72
ufs_strategy(cdecac3c,cdecac6c,c06b76fd,cdecac3c,1) at ufs_strategy+0x13c
ufs_vnoperate(cdecac3c,1,c089efd9,360,c0981060) at ufs_vnoperate+0x18
bwrite(c800e928,0,c089efd9,69b,bad20) at bwrite+0x44d
vfs_bio_awrite(c800e928,0,c089efd9,88e,c1ab1b40) at vfs_bio_awrite+0x252
flushbufqueues(0,0,c089efd9,111,64) at flushbufqueues+0x247
buf_daemon(0,cdecad48,c08969b9,311,696c2074) at buf_daemon+0xdc
fork_exit(c06b9d30,0,cdecad48) at fork_exit+0xb4
fork_trampoline() at fork_trampoline+0x8
--- trap 0x1, eip = 0, esp = 0xcdecad7c, ebp = 0 ---
db>
--APlYHCtpeOhspHkB
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="5.2-install-dmesg.cap"
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=01 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000ffff0000 len=0000000000010000
SMAP type=01 base=0000000000100000 len=000000000fef0000
SMAP type=03 base=000000000fff3000 len=000000000000d000
SMAP type=04 base=000000000fff0000 len=0000000000003000
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-BETA-20031129-JPSNAP #0: Sat Nov 29 02:47:57 GMT 2003
root at ushi.jp.freebsd.org:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0eb0000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0eb0200.
Calibrating clock(s) ... i8254 clock: 1193252 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 567959271 Hz
CPU: Intel Celeron (567.96-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268369920 (255 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001029000 - 0x000000000fb49fff, 246550528 bytes (60193 pages)
avail memory = 246972416 (235 MB)
bios32: Found BIOS32 Service Directory header at 0xc00faed0
bios32: Entry = 0xfb340 (c00fb340) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb370
pnpbios: Found PnP BIOS data at 0xc00fbd60
pnpbios: Entry = f0000:bd90 Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
acpi0: <VIA692 AWRDACPI> on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106)
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fdbf0
PCI-Only Interrupts: 5 10 11 12
Location Bus Device Pin Link IRQs
slot 1 0 15 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 1 0 15 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 1 0 15 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 1 0 15 D 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 13 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 2 0 13 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 2 0 13 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 13 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 B 0x05 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 9 A 0x05 3 4 5 7 9 10 11 12 14 15
slot 4 0 9 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 4 0 9 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 9 D 0x03 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 A 0x05 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 D 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15
embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\_SB_.PCI0.LNKA irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.15.0
\_SB_.PCI0.LNKB irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.15.1
\_SB_.PCI0.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.15.2
\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.15.3
\_SB_.PCI0.LNKB irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.0
\_SB_.PCI0.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.1
\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.2
\_SB_.PCI0.LNKA irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.3
\_SB_.PCI0.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.0
\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.1
\_SB_.PCI0.LNKA irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.2
\_SB_.PCI0.LNKB irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.3
\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.0
\_SB_.PCI0.LNKA irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.1
\_SB_.PCI0.LNKB irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.2
\_SB_.PCI0.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.3
\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.0
\_SB_.PCI0.LNKA irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.1
\_SB_.PCI0.LNKB irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.2
\_SB_.PCI0.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.3
\_SB_.PCI0.LNKA irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.0
\_SB_.PCI0.LNKB irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.1
\_SB_.PCI0.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.2
\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.3
\_SB_.PCI0.LNKA irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.0
\_SB_.PCI0.LNKB irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.1
\_SB_.PCI0.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.2
\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.3
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\_SB_.PCI0.LNKA irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.15.0
\_SB_.PCI0.LNKB irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.15.1
\_SB_.PCI0.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.15.2
\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.15.3
\_SB_.PCI0.LNKB irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.0
\_SB_.PCI0.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.1
\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.2
\_SB_.PCI0.LNKA irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.3
\_SB_.PCI0.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.0
\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.1
\_SB_.PCI0.LNKA irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.2
\_SB_.PCI0.LNKB irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.3
\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.0
\_SB_.PCI0.LNKA irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.1
\_SB_.PCI0.LNKB irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.2
\_SB_.PCI0.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.3
\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.0
\_SB_.PCI0.LNKA irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.1
\_SB_.PCI0.LNKB irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.2
\_SB_.PCI0.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.3
\_SB_.PCI0.LNKA irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.0
\_SB_.PCI0.LNKB irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.1
\_SB_.PCI0.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.2
\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.3
\_SB_.PCI0.LNKA irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.0
\_SB_.PCI0.LNKB irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.1
\_SB_.PCI0.LNKC irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.2
\_SB_.PCI0.LNKD irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base d0000000, size 26, enabled
found-> vendor=0x1106, dev=0x0691, revid=0x44
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x8598, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x0686, revid=0x22
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000b000, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x10
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000b400, size 5, enabled
pcib0: matched entry for 0.7.INTD (source \_SB_.PCI0.LNKD)
pcib0: slot 7 INTD is routed to irq 11
found-> vendor=0x1106, dev=0x3038, revid=0x10
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000b800, size 5, enabled
pcib0: matched entry for 0.7.INTD (source \_SB_.PCI0.LNKD)
pcib0: slot 7 INTD is routed to irq 11
found-> vendor=0x1106, dev=0x3038, revid=0x10
bus=0, slot=7, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3057, revid=0x30
bus=0, slot=7, func=4
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000bc00, size 8, enabled
map[14]: type 4, range 32, base 0000c000, size 2, enabled
map[18]: type 4, range 32, base 0000c400, size 2, enabled
pcib0: matched entry for 0.7.INTC (source \_SB_.PCI0.LNKC)
pcib0: slot 7 INTC is routed to irq 5
found-> vendor=0x1106, dev=0x3058, revid=0x20
bus=0, slot=7, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000cc00, size 6, enabled
pcib0: matched entry for 0.11.INTA (source \_SB_.PCI0.LNKC)
pcib0: slot 11 INTA is routed to irq 5
found-> vendor=0x1274, dev=0x5880, revid=0x02
bus=0, slot=11, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
intpin=a, irq=5
powerspec 1 supports D0 D2 D3 current D3
map[10]: type 4, range 32, base 0000d000, size 7, enabled
map[14]: type 1, range 32, base db004000, size 7, enabled
pcib0: matched entry for 0.13.INTA (source \_SB_.PCI0.LNKB)
pcib0: slot 13 INTA is routed to irq 10
found-> vendor=0x10b7, dev=0x9055, revid=0x30
bus=0, slot=13, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=10
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000d400, size 3, enabled
map[14]: type 4, range 32, base 0000d800, size 2, enabled
map[18]: type 4, range 32, base 0000dc00, size 3, enabled
map[1c]: type 4, range 32, base 0000e000, size 2, enabled
map[20]: type 4, range 32, base 0000e400, size 4, enabled
map[24]: type 1, range 32, base db000000, size 14, enabled
pcib0: matched entry for 0.17.INTA (source \_SB_.PCI0.LNKD)
pcib0: slot 17 INTA is routed to irq 11
found-> vendor=0x105a, dev=0x4d68, revid=0x02
bus=0, slot=17, func=0
class=01-80-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0430, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D3 current D0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xa000-0xafff
pcib1: memory decode 0xd8000000-0xd9ffffff
pcib1: prefetched decode 0xd4000000-0xd7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base d4000000, size 26, enabled
map[14]: type 4, range 32, base 0000a000, size 8, enabled
map[18]: type 1, range 32, base d9000000, size 14, enabled
pcib0: matched entry for 0.1.INTA (source \_SB_.PCI0.LNKA)
pcib0: slot 1 INTA is routed to irq 12
pcib1: slot 0 INTA is routed to irq 12
found-> vendor=0x1002, dev=0x5046, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
powerspec 2 supports D0 D1 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port 0xb000-0xb00f at device 7.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x7f msb=0x7f
ata1: reset tp2 mask=03 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 11 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
ums0: Logitech USB Receiver, rev 1.10/9.10, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 11 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
pci0: <multimedia, audio> at device 7.5 (no driver attached)
pci0: <multimedia, audio> at device 11.0 (no driver attached)
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xdb004000-0xdb00407f irq 10 at device 13.0 on pci0
xl0: using memory mapped I/O
xl0: Ethernet address: 00:50:04:6e:b9:01
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
atapci1: <Promise PDC20268 UDMA100 controller> port 0xe400-0xe40f,0xe000-0xe003,0xdc00-0xdc07,0xd800-0xd803,0xd400-0xd407 mem 0xdb000000-0xdb003fff irq 11 at device 17.0 on pci0
atapci1: [MPSAFE]
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: at 0xd400 on atapci1
ata2: [MPSAFE]
ata3: reset tp1 mask=03 ostat0=20 ostat1=30
ata3-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20
ata3-slave: stat=0x30 err=0x30 lsb=0x30 msb=0x30
ata3: reset tp2 mask=03 stat0=20 stat1=30 devices=0x0
ata3: at 0xdc00 on atapci1
ata3: [MPSAFE]
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: unable to allocate IRQ
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xcc000-0xce7ff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 567959271 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata1: spurious interrupt - status=0x00 error=0x01
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0a768c0
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on VIA 82C686A chip
ata0-master: setting UDMA66 on VIA 82C686A chip
GEOM: Configure md0a, start 0 length 4423680 end 4423679
GEOM: Configure md0c, start 0 length 4423680 end 4423679
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: create disk ad0 dp=0xc31eb560
ad0: <IBM-DTLA-307030/TX4OA60A> ATA-5 disk at ata0-master
ad0: 29314MB (60036480 sectors), 59560 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
ar: FreeBSD check1 failed
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on VIA 82C686A chip
GEOM: new disk ad0
acd0: <LITEON DVD-ROM LTD163/GH5K> DVDROM drive at ata1 as master
acd0: read 3437KB/s (8250KB/s), 512KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
[0] f:00 typ:5 s(CHS):15/0/1 e(CHS):1023/15/63 s:15120 l:10447920
[1] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/4/63 s:10474380 l:12578895
[2] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:23053275 l:12582549
[3] f:00 typ:7 s(CHS):1023/255/63 e(CHS):1023/7/63 s:35635824 l:24383016
GEOM: Configure ad0s1, start 7741440 length 5349335040 end 5357076479
GEOM: Configure ad0s2, start 5362882560 length 6440394240 end 11803276799
GEOM: Configure ad0s3, start 11803276800 length 6442265088 end 18245541887
GEOM: Configure ad0s4, start 18245541888 length 12484104192 end 30729646079
ata2-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata2-master: setting PIO4 on Promise PDC20268 chip
ata2-master: setting UDMA33 on Promise PDC20268 chip
GEOM: create disk ad4 dp=0xc31ead60
ad4: <FUJITSU MPC3064AT/6021> ATA-3 disk at ata2-master
ad4: 6187MB (12672450 sectors), 13410 C, 15 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA33
MBREXT Slice 5 on ad0s1:
[0] f:00 typ:7 s(CHS):1/1/1 e(CHS):691/239/63 s:63 l:10447857
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s5, start 32256 length 5349302784 end 5349335039
ar: Promise check1 failed
GEOM: Configure ad0s2a, start 536870912 length 5903523328 end 6440394239
GEOM: Configure ad0s2b, start 0 length 536870912 end 536870911
GEOM: Configure ad0s2c, start 0 length 6440394240 end 6440394239
GEOM: Configure ad0s3a, start 1073741824 length 5368523264 end 6442265087
GEOM: Configure ad0s3b, start 0 length 1073741824 end 1073741823
GEOM: Configure ad0s3c, start 0 length 6442265088 end 6442265087
GEOM: new disk ad4
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:12672387
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s1, start 32256 length 6488262144 end 6488294399
GEOM: Configure ad4s1a, start 536870912 length 5951391232 end 6488262143
GEOM: Configure ad4s1b, start 0 length 536870912 end 536870911
GEOM: Configure ad4s1c, start 0 length 6488262144 end 6488262143
Mounting root from ufs:/dev/md0
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /stand/sysinstall
/stand/sysinstall running as init on serial console
--APlYHCtpeOhspHkB--
More information about the freebsd-bugs
mailing list