kern/55097: BUSLink BusDrive Support (umass)

async at async at
Wed Jul 30 23:40:14 PDT 2003

>Number:         55097
>Category:       kern
>Synopsis:       BUSLink BusDrive Support (umass)
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          open
>Class:          change-request
>Submitter-Id:   current-users
>Arrival-Date:   Wed Jul 30 23:40:12 PDT 2003
>Originator:     Michael Hoisie <async at>
>Release:        FreeBSD 5.1-CURRENT-20030628-JPSNAP
System: FreeBSD 5.1-CURRENT-20030628-JPSNAP #8: Mon Jul 28 21:15:36 MDT 2003
    root at localhost:/usr/obj/usr/src/sys/TRACKSTAR

	The BUSlink BusDrive (pen usb drive) is unsupported in FreeBSD. 
	Plus in any model BusDrive into the USB port and you will be faced with an endless stream of CAM errors. 
Try and mount it with mount_msdos and you get more errors. 
add the following to /usr/src/sys/cam/scsi/scsi_da.c (in the quirks entry):
Note, this patch does NOT work in 4.8-stable. The BusDrive crashes 4.8-stable. This matter will be further investigated. 

	 * Buslink Dusdrive
	{T_DIRECT, SIP_MEDIA_REMOVABLE, "BusDrive", "*", "*"},

--- dmesg.txt begins here ---
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT-20030628-JPSNAP #8: Mon Jul 28 21:15:36 MDT 2003
    root at localhost:/usr/obj/usr/src/sys/TRACKSTAR
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0460000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc04601f4.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04602a0.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 696972514 Hz
CPU: Intel Pentium III (696.97-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
real memory  = 536805376 (511 MB)
avail memory = 516591616 (492 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL   I 5000 > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fdf50
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 7 INTD is routed to irq 5
pcib0: slot 8 INTA is routed to irq 5
pcib0: slot 16 INTA is routed to irq 5
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1225 PCI-CardBus Bridge> mem 0x88000000-0x88000fff at device 4.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: slot 4 INTA is routed to irq 11
cbb1: <TI1225 PCI-CardBus Bridge> mem 0x88001000-0x88001fff at device 4.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: slot 4 INTA is routed to irq 11
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1050-0x105f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 5 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: BUSlink Inc. USB Hub, class 9/0, rev 1.10/0.01, addr 2
uhub1: 2 ports with 0 removable, self powered
umass0: BUSlink Inc. USB Mass Storage, rev 1.10/0.01, addr 3
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 8.0 (no driver attached)
pci0: <simple comms> at device 16.0 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
orm0: <Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
    ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc4027060), AE_ERROR
ata1-slave: timeout waiting for interrupt
ata1-slave: ATA identify failed
ad0: 19077MB <IBM-DJSA-220> [38760/16/63] at ata0-master UDMA33
acd0: DVD-ROM <LG DVD-ROM DRN-8080B> at ata1-master PIO4
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <BusDrive  1.00> Removable Direct Access SCSI-0 device 
da0: 1.000MB/s transfers
da0: 62MB (128000 512 byte sectors: 64H 32S/T 62C)
Mounting root from ufs:/dev/ad0s2a
--- dmesg.txt ends here ---


More information about the freebsd-bugs mailing list