Loading kernel...
/boot/kernel/kernel text=0x9373b4 data=0x191048+0x84ab1c syms=[0x8+0x138798+0x8+0x124a30]
Loading configured modules...
can't find '/boot/entropy'
Using DTB provided by EFI at 0x7f04000.
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
                   Type     Physical      Virtual   #Pages Attr
               Reserved 000000000000            0 00000001 WB
     ConventionalMemory 000000004000         4000 00007f00 WB
       BootServicesData 000007f04000      7f04000 00000009 WB
     ConventionalMemory 000007f0d000      7f0d000 00027de4 WB
             LoaderData 00002fcf1000     2fcf1000 00004001 WB
       BootServicesData 000033cf2000     33cf2000 00000002 WB
             LoaderData 000033cf4000     33cf4000 00004000 WB
             LoaderCode 000037cf4000     37cf4000 0000009c WB
               Reserved 000037d90000     37d90000 00000002 WB
             LoaderData 000037d92000     37d92000 000021a1 WB
             LoaderCode 000039f33000     39f33000 00000015 WB
               Reserved 000039f48000     39f48000 00000006 WB
    RuntimeServicesData 000039f4e000     39f4e000 00000001 WB RUNTIME
               Reserved 000039f4f000     39f4f000 00000005 WB
    RuntimeServicesData 000039f54000     39f54000 00000001 WB RUNTIME
               Reserved 000039f55000     39f55000 00000001 WB
             LoaderData 000039f56000     39f56000 000013fa WB
    RuntimeServicesCode 00003b350000     3b350000 00000010 WB RUNTIME
             LoaderData 00003b360000     3b360000 000000a0 WB
         MemoryMappedIO 0000fe100000     fe100000 00000001 RUNTIME
Physical memory chunk(s):
  0x00004000 - 0x37d8ffff,   893 MB ( 228748 pages)
  0x37d92000 - 0x39f47fff,    33 MB (   8630 pages)
  0x39f4e000 - 0x39f4efff,     0 MB (      1 pages)
  0x39f54000 - 0x39f54fff,     0 MB (      1 pages)
  0x39f56000 - 0x3b34ffff,    19 MB (   5114 pages)
  0x3b360000 - 0x3b3fffff,     0 MB (    160 pages)
Excluded memory regions:
  0x00000000 - 0x00000fff,     0 MB (      1 pages) NoAlloc
  0x2fe00000 - 0x315a3fff,    23 MB (   6052 pages) NoAlloc
  0x37d90000 - 0x37d91fff,     0 MB (      2 pages) NoAlloc
  0x39f48000 - 0x39f55fff,     0 MB (     14 pages) NoAlloc
  0x3b350000 - 0x3b35ffff,     0 MB (     16 pages) NoAlloc
  0xfe100000 - 0xfe100fff,     0 MB (      1 pages) NoAlloc
Found 4 CPUs in the device tree
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 2474a68216f(master)-dirty: Sat Jul 13 21:19:35 BST 2019
    root@crossbuild.tiberius:/skeleton/root/sandbox/work-rpi4.1/obj/skeleton/root/sandbox/src/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 8.0.1 (branches/release_80 363030) (based on LLVM 8.0.1)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffff000001579000.
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
VIMAGE (virtualized network stack) enabled
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
random: entropy device external interface
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
MAP 39f4e000 mode 2 pages 1
MAP 39f54000 mode 2 pages 1
MAP 3b350000 mode 2 pages 16
EFI Runtime entry 19 mapping attributes unsupported
MAP fe100000 mode 1 pages 1
nfslock: pseudo-device
crypto: <crypto core>
kbd0 at kbdmux0
mem: <memory>
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
simplebus1: <Flattened device tree simple bus> on ofwbus0
simplebus2: <Flattened device tree simple bus> on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version 0.2 compatible
gic0: <ARM Generic Interrupt Controller> mem 0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x40046000-0x40047fff on simplebus0
simplebus0: no default resources for rid = 0, type = 1
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 22,23,24,25 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
Processing 3 pin-config node(s) in pinctrl-0 for serial@7e201000
gpio0: set pin 30 to func 7, pull 2
gpio0: set pin 31 to func 7, pull 0
gpio0: set pin 32 to func 7, pull 0
gpio0: set pin 32 to func 7, pull 0                                                                                                                                        [133/9134]
gpio0: set pin 33 to func 7, pull 2
gpio0: set pin 43 to func 4, pull 0
Processing 1 pin-config node(s) in pinctrl-0 for i2c@7e205000
gpio0: set pin 0 to func 4
gpio0: set pin 1 to func 4
Processing 1 pin-config node(s) in pinctrl-0 for serial@7e215040
gpio0: set pin 14 to func 2
gpio0: set pin 15 to func 2
Processing 1 pin-config node(s) in pinctrl-0 for sdhci@7e300000
gpio0: set pin 34 to func 7, pull 0
gpio0: set pin 35 to func 7, pull 2
gpio0: set pin 36 to func 7, pull 2
gpio0: set pin 37 to func 7, pull 2
gpio0: set pin 38 to func 7, pull 2
gpio0: set pin 39 to func 7, pull 2
Processing 1 pin-config node(s) in pinctrl-0 for i2c@7e804000
gpio0: set pin 2 to func 4
gpio0: set pin 3 to func 4
Processing 2 pin-config node(s) in pinctrl-0 for pwm@7e20c800
gpio0: set pin 40 to func 4
gpio0: set pin 41 to func 4
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
generic_timer0: <ARMv7 Generic Timer> irq 4,5,6,7 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
efirtc0: cannot read EFI realtime clock, error 78
ofwbus0: <framebuffer> disabled compat simple-framebuffer (no driver attached)
simplebus0: <txp@7e004000> mem 0x7e004000-0x7e00401f irq 8 compat brcm,bcm2835-txp (no driver attached)
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007aff irq 9,10,11,12,13,14,15,16,17,18,19 on simplebus0
bcm_dma0: cannot setup interrupt handler
device_attach: bcm_dma0 attach returned 6
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on simplebus0
simplebus0: <cprman@7e101000> mem 0x7e101000-0x7e102fff compat brcm,bcm2838-cprman (no driver attached)
simplebus0: <rng@7e104000> mem 0x7e104000-0x7e10400f irq 20 compat brcm,bcm2838-rng200 (no driver attached)
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 21 on simplebus0
gpioc0: <GPIO controller> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 26 on simplebus0
uart0: fast interrupt
uart0: PPS capture mode: DCD
simplebus0: <mmc@7e202000> mem 0x7e202000-0x7e2020ff irq 27 disabled compat brcm,bcm2835-sdhost (no driver attached)
simplebus0: <i2s@7e203000> mem 0x7e203000-0x7e203023 disabled compat brcm,bcm2835-i2s (no driver attached)
simplebus0: <spi@7e204000> mem 0x7e204000-0x7e2041ff irq 28 disabled compat brcm,bcm2835-spi (no driver attached)
iichb0: <BCM2708/2835 BSC controller> mem 0x7e205000-0x7e2051ff irq 29 on simplebus0
simplebus0: <pixelvalve@7e206000> mem 0x7e206000-0x7e2060ff irq 30 compat brcm,bcm2835-pixelvalve0 (no driver attached)
simplebus0: <pixelvalve@7e207000> mem 0x7e207000-0x7e2070ff irq 31 compat brcm,bcm2835-pixelvalve1 (no driver attached)
simplebus0: <dpi@7e208000> mem 0x7e208000-0x7e20808b disabled compat brcm,bcm2835-dpi (no driver attached)
simplebus0: <dsi@7e209000> mem 0x7e209000-0x7e209077 irq 32 compat brcm,bcm2835-dsi0 (no driver attached)
simplebus0: <aux@7e215000> mem 0x7e215000-0x7e215007 compat brcm,bcm2835-aux (no driver attached)
uart1: <BCM2835 Mini-UART> mem 0x7e215040-0x7e21507f irq 33 on simpuart1: console (115200,n,8,1)
uart1: fast interrupt
uart1: PPS capture mode: DCD
simplebus0: <spi@7e215080> mem 0x7e215080-0x7e2150bf irq 34 disabled compat brcm,bcm2835-aux-spi (no driver attached)
simplebus0: <spi@7e2150c0> mem 0x7e2150c0-0x7e2150ff irq 35 disabled compat brcm,bcm2835-aux-spi (no driver attached)
simplebus0: <pwm@7e20c000> mem 0x7e20c000-0x7e20c027 disabled compat brcm,bcm2835-pwm (no driver attached)
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 36 on simplebus0
device_attach: sdhci_bcm0 attach returned 6
simplebus0: <hvs@7e400000> mem 0x7e400000-0x7e405fff irq 37 compat brcm,bcm2835-hvs (no driver attached)
simplebus0: <dsi@7e700000> mem 0x7e700000-0x7e70008b irq 38 disabled compat brcm,bcm2835-dsi1 (no driver attached)
simplebus0: <csi@7e800000> mem 0x7e800000-0x7e8007ff,0x7e802000-0x7e802003 irq 39 disabled compat brcm,bcm2835-unicam (no driver attached)
simplebus0: <csi@7e801000> mem 0x7e801000-0x7e8017ff,0x7e802004-0x7e802007 irq 40 disabled compat brcm,bcm2835-unicam (no driver attached)
iichb1: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 41 on simplebus0
iichb2: <BCM2708/2835 BSC controller> mem 0x7e805000-0x7e805fff irq 42 on simplebus0
simplebus0: <vec@7e806000> mem 0x7e806000-0x7e806fff irq 43 compat brcm,bcm2835-vec (no driver attached)
simplebus0: <pixelvalve@7e807000> mem 0x7e807000-0x7e8070ff irq 44 compat brcm,bcm2835-pixelvalve2 (no driver attached)
simplebus0: <hdmi@7e902000> mem 0x7e902000-0x7e9025ff,0x7e808000-0x7e8080ff irq 45,46 compat brcm,bcm2835-hdmi (no driver attached)
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff irq 47 on simplebus0
usbus0 on bcm283x_dwcotg0
bcm283x_dwcotg0: usbpf: Attached
simplebus0: <gpu> compat brcm,bcm2835-vc4 (no driver attached)
simplebus0: <thermal@7d5d2200> mem 0x7d5d2200-0x7d5d222b irq 48 compat brcm,avs-tmon-bcm2838 (no driver attached)
simplebus0: <serial@7e201400> mem 0x7e201400-0x7e2015ff irq 49 disabled compat brcm,bcm2835-pl011 (no driver attached)
simplebus0: <serial@7e201600> mem 0x7e201600-0x7e2017ff irq 50 disabled compat brcm,bcm2835-pl011 (no driver attached)
simplebus0: <serial@7e201800> mem 0x7e201800-0x7e2019ff irq 51 disabled compat brcm,bcm2835-pl011 (no driver attached)
simplebus0: <serial@7e201a00> mem 0x7e201a00-0x7e201bff irq 52 disabled compat brcm,bcm2835-pl011 (no driver attached)
simplebus0: <spi@7e204600> mem 0x7e204600-0x7e2047ff irq 53 disabled compat brcm,bcm2835-spi (no driver attached)
simplebus0: <spi@7e204800> mem 0x7e204800-0x7e2049ff irq 54 disabled compat brcm,bcm2835-spi (no driver attached)
simplebus0: <spi@7e204a00> mem 0x7e204a00-0x7e204bff irq 55 disabled compat brcm,bcm2835-spi (no driver attached)
simplebus0: <spi@7e204c00> mem 0x7e204c00-0x7e204dff irq 56 disabled compat brcm,bcm2835-spi (no driver attached)
simplebus0: <i2c@7e205600> mem 0x7e205600-0x7e2057ff irq 57 disabled compat brcm,bcm2835-i2c (no driver attached)
simplebus0: <i2c@7e205800> mem 0x7e205800-0x7e2059ff irq 58 disabled compat brcm,bcm2835-i2c (no driver attached)
simplebus0: <i2c@7e205a00> mem 0x7e205a00-0x7e205bff irq 59 disabled compat brcm,bcm2835-i2c (no driver attached)
simplebus0: <i2c@7e205c00> mem 0x7e205c00-0x7e205dff irq 60 disabled compat brcm,bcm2835-i2c (no driver attached)
simplebus0: <pwm@7e20c800> mem 0x7e20c800-0x7e20c827 compat brcm,bcm2835-pwm (no driver attached)
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e340000-0x7e3400ff irq 61 on simplebus0
device_attach: sdhci_bcm0 attach returned 6
simplebus0: <firmware> compat raspberrypi,bcm2835-firmware (no driver attached)
simplebus0: <power> compat raspberrypi,bcm2835-power (no driver attached)
ofwbus0: <arm-pmu> irq 0,1,2,3 compat arm,cortex-a72-pmu (no driver attached)
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu0: missing 'clock-frequency' property
cpu1: <Open Firmware CPU> on cpulist0
cpu1: missing 'clock-frequency' property
cpu2: <Open Firmware CPU> on cpulist0
cpu2: missing 'clock-frequency' property
cpu3: <Open Firmware CPU> on cpulist0
cpu3: missing 'clock-frequency' property
simplebus1: <v3d@7ec04000> mem 0x7ec00000-0x7ec03fff,0x7ec04000-0x7ec07fff irq 62 compat brcm,2711-v3d (no driver attached)
simplebus2: <pcie@7d500000> mem 0x7d500000-0x7d50930f,0x7e00f300-0x7e00f31f irq 63,64 compat brcm,bcm7211-pcie (no driver attached)
simplebus2: <genet@7d580000> mem 0x7d580000-0x7d58ffff irq 65,66 compat brcm,genet-v5 (no driver attached)
simplebus2: <dma@7e007b00> mem 0x7e007b00-0x7e007eff irq 67,68,69,70 compat brcm,bcm2838-dma (no driver attached)
simplebus2: <xhci@7e9c0000> mem 0x7e9c0000-0x7eabffff irq 71 disabled compat generic-xhci (no driver attached)
simplebus2: <hevc-decoder@7eb00000> mem 0x7eb00000-0x7eb0ffff compat raspberrypi,argon-hevc-decoder (no driver attached)
simplebus2: <argon-local-intc@7eb10000> mem 0x7eb10000-0x7eb10fff irq 72 compat raspberrypi,argon-local-intc (no driver attached)
simplebus2: <h264-decoder@7eb20000> mem 0x7eb20000-0x7eb2ffff compat raspberrypi,argon-h264-decoder (no driver attached)
simplebus2: <vp9-decoder@7eb30000> mem 0x7eb30000-0x7eb3ffff compat raspberrypi,argon-vp9-decoder (no driver attached)
simplebus2: <mailbox@7e00b840> mem 0x7e00b840-0x7e00b87b irq 73 compat brcm,bcm2838-vchiq (no driver attached)
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <PWR> failed to map pin
ofwbus0: <wifi-pwrseq> compat mmc-pwrseq-simple (no driver attached)
gpioregulator0: <GPIO controlled regulator> on ofwbus0
gpioregulator0: cannot get pin 0
gpioregulator0: cannot parse parameters
device_attach: gpioregulator0 attach returned 6
cryptosoft0: <software crypto>
crypto: assign cryptosoft0 driver id 0, flags 0x6000000
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 34 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 35 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 36 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 37 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 40 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 39 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 38 flags 0 maxoplen 0
Device configuration finished.
Found SMCCC version 1.0
procfs registered
Timecounters tick every 1.000 msec
lo0: bpf attached
vlan: initialized, using hash tables with chaining
IPsec: Initialized Security Association Processing.
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
iicbus2: <OFW I2C bus> on iichb2
iic2: <I2C generic I/O> on iicbus2
usbus0: 480Mbps High Speed USB v2.0