RPi4B 2711ZPKFSB06C0T parts seen in the wild, 13.0-RELEASE fails to boot on them

[Denis Ovsienko]

On Sun, 18 Apr 2021 16:12:35 -0700
Mark Millard <marklmi at yahoo.com> wrote:

> So I propose another test under RaspiOS or RaspiOS64:
> 
> # vcgencmd bootloader_config
> and/or:
> # rpi-eeprom-config

This is RPI b03114 that can boot and run FreeBSD 13.0 (and OpenBSD 6.8),
booted into the latest 32-bit Raspbian:

root at raspberrypi:~# grep -E '^[^#]' /boot/config.txt 
dtparam=i2c_arm=on
dtparam=audio=on
[pi4]
dtoverlay=vc4-fkms-v3d
max_framebuffers=2
[all]
gpu_mem=16

root at raspberrypi:~# vcgencmd bootloader_config
[all]
BOOT_UART=0
WAKE_ON_GPIO=1
POWER_OFF_ON_HALT=0
DHCP_TIMEOUT=45000
DHCP_REQ_TIMEOUT=4000
TFTP_FILE_TIMEOUT=30000
ENABLE_SELF_UPDATE=1
DISABLE_HDMI=0
BOOT_ORDER=0xf41

root at raspberrypi:~# rpi-eeprom-config 
[all]
BOOT_UART=0
WAKE_ON_GPIO=1
POWER_OFF_ON_HALT=0
DHCP_TIMEOUT=45000
DHCP_REQ_TIMEOUT=4000
TFTP_FILE_TIMEOUT=30000
ENABLE_SELF_UPDATE=1
DISABLE_HDMI=0
BOOT_ORDER=0xf41

root at raspberrypi:~# rpi-eeprom-update 
BOOTLOADER: up-to-date
   CURRENT: Thu  3 Sep 12:11:43 UTC 2020 (1599135103)
    LATEST: Thu  3 Sep 12:11:43 UTC 2020 (1599135103)
   RELEASE: default (/lib/firmware/raspberrypi/bootloader/default)
            Use raspi-config to change the release.

  VL805_FW: Using bootloader EEPROM
     VL805: up-to-date
   CURRENT: 000138a1
    LATEST: 000138a1

root at raspberrypi:~# lspci 
00:00.0 PCI bridge: Broadcom Limited Device 2711 (rev 10)
01:00.0 USB controller: VIA Technologies, Inc. VL805 USB 3.0 Host
  Controller (rev 01)

root at raspberrypi:~# lsusb 
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

-- 
    Denis Ovsienko