Recommended arm hardware (mostly for compilation)?

[Mark Millard]

On 2020-May-17, at 13:03, Mark Millard <marklmi at yahoo.com> wrote:



> On 2020-May-17, at 12:56, Philipp Klaus Krause <pkk at spth.de> wrote:
> 
>> Am 17.05.20 um 21:45 schrieb Mark Millard:
>>> 
>>> HoneyComb-LX2K-datasheet.pdf reports:
>>> 
>>> Safety Notice
>>> 
>>> 	• This device is to be used with Certified Power adaptor with output rated 12VDC, 1.5A.
>> 
>> AFAIK, the processor's TDP alone is already 30W
>> (https://www.nxp.com/docs/en/supporting-information/LX2160A-NXP-Biggest-Multicore.pdf),
>> so I don't believe 18W for the whole board.
> 
> And LPS limits things to under 8 amps for 12V, as I remember.
> (But look it up if you care.)
> 
> I took the two references (1.5A and LPS) as a minimum to maximum
> indication to accommodate a range of usage contexts.

Solid-run has a video showing a LX2160A system with a video
card and such:

https://youtu.be/lxdRSCQfhyw

It mentions that the configuration uses about 50W.
(Not that they give specifics of which video card
or the like.)

===
Mark Millard
marklmi at yahoo.com
( dsl-only.net went
away in early 2018-Mar)