Add Support for Radxa RockPi E

[Furkan Salman]

Hello Team,

With the help of Sergey (S199pWa1k9r), I was able to boot into RockPi E and have both lan card detected, but one of the lan cannot detect a cable connected to it which means it is always down and doesn't come up.



Here is the Boot log https://hastebin.com/olehocidib.makefile

When I connect the lan on RTL8211E (GMAC) then it can get ip address from the dhcp server but when I connect lan to PHY (10/100) then it is not coming up.

ifconfig can be found here https://hastebin.com/ecazezikih.xml  


I think gonzo will be looking into this on the weekend, but if there is anyone else who is aware of this issue then kindly guide us.

Thanks.

---- On Thu, 25 Jun 2020 17:49:51 +0300 Aleksandr Rybalko <mailto:ray at freebsd.org> wrote ----


Hmmm, I see only GMAC (10/100/1000) and PHY(10/100) that can be configured as connected to GMAC in Datasheet.




чт, 25 черв. 2020 о 02:17 Sleep Walker <mailto:s199p.wa1k9r at gmail.com> пише:





>From TRM
 ———
 
 There are two independent GMAC controllers named GMAC2IO and GMAC2PHY:
  GMAC2IO Supports 10/100/1000-Mbps data transfer rates with the RGMII interfaces and Supports 10/100-Mbps data transfer rates with the RMII interfaces
  GMAC2PHY Supports 10/100-Mbps data transfer rates with the RMII interfaces
 ———-
 
 
 Отправлено с iPad
 
 > 24 июня 2020 г., в 19:29, Ganbold Tsagaankhuu <mailto:ganbold at gmail.com> написал(а):
 > 
 > On Wed, Jun 24, 2020 at 10:12 PM Furkan Salman <mailto:furkan at fkardame.com> wrote:
 > 
 >> Hello,
 >> 
 >> I was able to boot FreeBSD on Radxa RockPi E over emmc with the help of
 >> Sergey (sl199pwa1k9r).
 >> Details of the device can be found here
 >> https://wiki.radxa.com/RockpiE/getting_started. It have removable emmc.
 >> 
 >> 
 >> 
 >> 
 >> 
 >> Boot Logs: https://hastebin.com/eyokuqoyif.coffeescript
 >> 
 >> 
 >> 
 >> Things not working yet:
 >> 
 >> RK3328 onboard Lan.
 >> 
 >> Micro-Hdmi connector (Only used for debugging and not MP)
 >> 
 >> Boot from SD Card, Pin detection fails, Was able to boot into it manually.
 >> 
 >> As per Sergey, we might need some help understanding how the Lan is
 >> working on rock64 board using onboard Lan driver.
 >> 
 >> 
 >> 
 >> Can anyone advice us on how can we add onboard lan driver.
 >> 
 >> 
 > Their wiki page doesn't say anything about 100M LAN in detail. Maybe it is
 > better either to ask them or boot linux and see what Ethernet
 > chipset/controller it says in log/dmesg.
 > 
 > Ganbold
 > 
 > 
 > 
 >> 
 >> 
 >> Thanks.
 >> Furkan K.
 >> _______________________________________________
 >> mailto:freebsd-arm at freebsd.org mailing list
 >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
 >> To unsubscribe, send any mail to "mailto:freebsd-arm-unsubscribe at freebsd.org"
 >> 
 > _______________________________________________
 > mailto:freebsd-arm at freebsd.org mailing list
 > https://lists.freebsd.org/mailman/listinfo/freebsd-arm
 > To unsubscribe, send any mail to "mailto:freebsd-arm-unsubscribe at freebsd.org"
 _______________________________________________
 mailto:freebsd-arm at freebsd.org mailing list
 https://lists.freebsd.org/mailman/listinfo/freebsd-arm
 To unsubscribe, send any mail to "mailto:freebsd-arm-unsubscribe at freebsd.org"