Enc28j60 SPI not work on RPIB4

[Tobias Kilb]

Does the SPI works in general? Short circuit rx/tx echoes back data?

Robert Crowston via freebsd-arm <freebsd-arm at freebsd.org> schrieb am So.,
12. Apr. 2020, 16:24:

> Support for rpi4 is in an early stage. A driver for the ethernet
> controller is in the works -- I've seen an early version and it works for
> me -- and I'm working on a driver for the PCI-E interface that will enable
> USB (I'm figuring out the controller's quirky MSI at the moment).
>
> But you should not generally expect much of the Rpi4 to work at this point.
>
>
> ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> On Sunday, 12 April 2020 11:42, ykla <yklaxds at gmail.com> wrote:
>
> > I test it works well in raspbian. But not work in FreeBSD, it's looks
> like
> > SPI not work. And I already add enc28j60.dtbo in overlays.
> > No network for rpi4b now then I try to install enc28j60 to rpi4b, but
> also
> > no net.
> >
> _______________________________________________
> freebsd-arm at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
>