Espressobin anyone ?
Søren Schmidt
soren.schmidt at gmail.com
Thu Aug 15 19:56:27 UTC 2019
Well, I don’t care where you are from and what color you have :)
Now, if I update my stable12 sources to r350595 the bananapi breaks, if revert sys/gnu/dts it works again, go figure..
The r351099 fix is already like that in -stable, and not part of the problem.
-Søren
> On 15 Aug 2019, at 21.03, Emmanuel Vadot <manu at bidouilliste.com> wrote:
>
> On Thu, 15 Aug 2019 19:48:54 +0200
> Søren Schmidt <soren.schmidt at gmail.com> wrote:
>
>> Hi Mit!
>>
>> Right, I suspected that, 12-stable broke many embedded systems between r350592 and r350595 where all the latest and greatest DTS files was pulled in, I guess the same holds for -current.
>>
>> -Søren
>
> Mhm it's fun that you think that DTS import is the source of all your
> problems, I get it, it's easy to blame the French guy that bulk import
> the DTS, he surely don't know what he is doing.
> Anyway, two problems were raised in this thread :
>
> 1) BananaPi (A20) doesn't boot
> 2) Espressobin sd support is broken
>
> I've just looked at the BananaPi problem today, I've fixed a first
> problem in r351099.
> The main problem is that when we disable the unused regulators we hang
> when trying to disabling ldo3. It's weird because the board doesn't use
> LDO3 (which is why we are disabling it, it's unused). The problem is in
> twsi I think as only leaving the part in axp209 that read the
> voltage register value make FreeBSD hang.
> I'll have a proper look later, in the meantime you can set
> hw.regulator.disable_unused=0
> in /boot/loader.conf
> This isn't a DTS problem.
>
> For Espressobin I haven't found any thing related to SD in the DTS
> updates since the import, the only things slighly related are mmc and
> sdio.
> So if someone could find which DTS import broke this I can have a look.
>
>>
>>> On 15 Aug 2019, at 19.37, Mit Matelske <mit at pt.net> wrote:
>>>
>>> Yeah, that was the problem. I went back to r348882 and everything worked out of the box.
>>>
>>> Thanks again for the hand holding!
>>>
>>> Mit
>>>
>>> From: "Søren Schmidt" <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>>
>>> To: "Mit Matelske" <mit at pt.net <mailto:mit at pt.net>>
>>> Cc: "Marcin Wojtas" <mw at semihalf.com <mailto:mw at semihalf.com>>, "freebsd-arm" <freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org>>
>>> Sent: Wednesday, August 14, 2019 1:33:04 PM
>>> Subject: Re: Espressobin anyone ?
>>>
>>>
>>> It might simply be broken in -current (again).
>>>
>>> I just updated my stable12 tree and I pulled in new .dts files for just about anything?
>>>
>>> Needless to say, it broke the Espressobin?s SD support, it now fails just like yours..
>>>
>>> It also broke allwinner builds and what not, so I?m just going back in time again :)
>>>
>>> I wonder why there is this overwhelming need to import stuff that breaks things right, left and center in a -stable branch ?
>>> That would have earned you the pointy hat back when?.
>>>
>>> -Søren
>>>
>>>
>>> On 14 Aug 2019, at 18.01, Mit Matelske <mit at pt.net <mailto:mit at pt.net>> wrote:
>>>
>>> Marcin-
>>>
>>> Sorry I didn't reply yesterday. I didn't have any luck with that either. I tried a lot of permutations.
>>>
>>> Not saying for 100% it doesn't work, but I couldn't get it to work!
>>>
>>> Mit
>>>
>>> From: "Marcin Wojtas" <mw at semihalf.com <mailto:mw at semihalf.com>>
>>> To: "Mit Matelske" <mit at pt.net <mailto:mit at pt.net>>
>>> Cc: "Søren Schmidt" <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>>, "freebsd-arm" <freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org>>
>>> Sent: Wednesday, August 14, 2019 10:41:04 AM
>>> Subject: Re: Espressobin anyone ?
>>>
>>> Hi Mit,
>>> Since you are using the latest 13-current, could you please try if passing rootdev via u-boot bootargs (please see my previous email) works for you without the loader modification?
>>>
>>> Best regards,
>>> Marcin
>>>
>>> ?r., 14 sie 2019 o 16:29 Mit Matelske <mit at pt.net <mailto:mit at pt.net>> napisa?(a):
>>> Soren-
>>>
>>> Thanks for the info. I'll grab a couple more SD cards at lunch. This one is a new Samsung 32GB. I'll also try putting the changes into 12 and see if that helps. I'm using the latest 13-current.
>>>
>>> Again, appreciate the hand holding!
>>>
>>> Mit
>>>
>>> From: "Søren Schmidt" <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>>
>>> To: "Mit Matelske" <mit at pt.net <mailto:mit at pt.net>>
>>> Cc: "Marcin Wojtas" <mw at semihalf.com <mailto:mw at semihalf.com>>, "freebsd-arm" <freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org>>
>>> Sent: Wednesday, August 14, 2019 2:30:31 AM
>>> Subject: Re: Espressobin anyone ?
>>>
>>> Hi Mit
>>> Hmm, from your earlier posted dmesgs it looks like the SD card is not getting detected properly..
>>>
>>> I get this output:
>>>
>>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
>>> mmc0: <MMC/SD bus> on sdhci_xenon0
>>> ?snip?
>>> mmcsd0: 16GB <SDHC SD16G 3.0 SN 01E28E67 MFG 07/2017 by 39 PH> at mmc0 50.0MHz/4bit/65535-block
>>>
>>> The problem you see was fixed for me by r348882, maybe it got broken later, I havn?t backported the later changes..
>>>
>>> Have you tried another SD card ? I have found 2 of mine that the espressobin doesn?t like, but works fine with bananapi and friends...
>>>
>>> -Søren
>>>
>>> On 13 Aug 2019, at 23.30, Mit Matelske <mit at pt.net <mailto:mit at pt.net>> wrote:
>>>
>>> Soren-
>>>
>>> Thanks for the code snippet! That will fix one of the problems.
>>>
>>> I still can't mount my filesystem, though. I think I'm doing something really simple, wrong. I believe I'm running the latest code and added some printfs to show the kernel setting the regulator:
>>>
>>>
>>> usbus1 on ehci0
>>> syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1
>>> sdhci_xenon0: regulator_get_by_ofw_property(vqmmc-supply) = 19
>>> sdhci_xenon0: vqmmc-supply regulator found
>>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
>>> ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on simplebus1
>>>
>>>
>>> Could there be a problem with how I am setting up my filesystem? I've tried both freebsd-ufs and freebsd as the type, with no luck. A gpart listing of my SD card:
>>>
>>> root at fbl:~ # gpart list da3
>>> Geom name: da3
>>> modified: false
>>> state: OK
>>> fwheads: 255
>>> fwsectors: 63
>>> last: 62521335
>>> first: 3
>>> entries: 4
>>> scheme: GPT
>>> Providers:
>>> 1. Name: da3p1
>>> Mediasize: 41943040 (40M)
>>> Sectorsize: 512
>>> Stripesize: 0
>>> Stripeoffset: 1536
>>> Mode: r0w0e0
>>> efimedia: HD(1,GPT,19894dc5-b8b2-11e9-871f-08008a0010e0,0x3,0x14000)
>>> rawuuid: 19894dc5-b8b2-11e9-871f-08008a0010e0
>>> rawtype: c12a7328-f81f-11d2-ba4b-00a0c93ec93b
>>> label: (null)
>>> length: 41943040
>>> offset: 1536
>>> type: efi
>>> index: 1
>>> end: 81922
>>> start: 3
>>> 2. Name: da3p2
>>> Mediasize: 31968979456 (30G)
>>> Sectorsize: 512
>>> Stripesize: 0
>>> Stripeoffset: 41944576
>>> Mode: r0w0e0
>>> efimedia: HD(2,GPT,98786462-be30-11e9-ae6e-08008a0010e0,0x14003,0x3b8bff5)
>>> rawuuid: 98786462-be30-11e9-ae6e-08008a0010e0
>>> rawtype: 516e7cb6-6ecf-11d6-8ff8-00022d09712b
>>> label: (null)
>>> length: 31968979456
>>> offset: 41944576
>>> type: freebsd-ufs
>>> index: 2
>>> end: 62521335
>>> start: 81923
>>> Consumers:
>>> 1. Name: da3
>>> Mediasize: 32010928128 (30G)
>>> Sectorsize: 512
>>> Mode: r0w0e0
>>>
>>> Thanks!!
>>>
>>> Mit
>>>
>>> From: "Søren Schmidt" <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>>
>>> To: "Marcin Wojtas" <mw at semihalf.com <mailto:mw at semihalf.com>>
>>> Cc: "Mit Matelske" <mit at pt.net <mailto:mit at pt.net>>, "freebsd-arm" <freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org>>
>>> Sent: Tuesday, August 13, 2019 12:55:09 PM
>>> Subject: Re: Espressobin anyone ?
>>>
>>> Hi
>>> That doesn?t seen to work on the espressobin, or least I can?t get it to pick it up.
>>>
>>> I use this patch as a workaround:
>>>
>>> Index: main.c
>>> ===================================================================
>>> --- main.c (revision 350496)
>>> +++ main.c (working copy)
>>> @@ -463,6 +462,13 @@
>>> int rv;
>>> char *rootdev;
>>>
>>> +#if defined(__aarch64__)
>>> + /* SOS HACK in rootdev, at least Espressobin gets this wrong */
>>> + printf("Setting currdev hack\n");
>>> + set_currdev("disk0p2");
>>> + return (0);
>>> +#endif
>>> +
>>> /*
>>> * First choice: if rootdev is already set, use that, even if
>>> * it's wrong.
>>>
>>> Its not pretty but it does the job until I get time to look into why bootargs aren?t passed / won?t stick, probably something I havn?t backported to my -stable12 sources yet...
>>>
>>> -Søren
>>>
>>> On 13 Aug 2019, at 01.38, Marcin Wojtas <mw at semihalf.com <mailto:mw at semihalf.com>> wrote:
>>>
>>> Hi,
>>>
>>> Not sure if it's what you are looking for, but in order to autoboot, I
>>> simply pass 'rootdev=diskXpY' in the bootargs variable. Here's example from
>>> A3720-DB (same should work on EspressoBin):
>>>
>>> Marvell>> set bootargs "rootdev=disk1p1";usb reset; fatload usb 0:1
>>> ${fdt_addr} armada-3720-db.dtb; fatload usb 0:1 ${kernel_addr}
>>> boot/loader.efi; bootefi ${kernel_addr} ${fdt_addr}
>>> resetting USB...
>>> USB0: Register 2000104 NbrPorts 2
>>> Starting the controller
>>> USB XHCI 1.00
>>> USB1: USB EHCI 1.00
>>> - ______ ____ _____ _____
>>> | ____| | _ \ / ____| __ \
>>> | |___ _ __ ___ ___ | |_) | (___ | | | |
>>> | ___| '__/ _ \/ _ \| _ < \___ \| | | |
>>> | | | | | __/ __/| |_) |____) | |__| |
>>> | | | | | | || | | |
>>> |_| |_| \___|\___||____/|_____/|_____/
>>> ```
>>> `
>>> ????????????Welcome to FreeBSD????????????? s` `.....---.......--.```
>>> -/
>>> ? ? +o .--` /y:`
>>> +.
>>> ? 1. Boot Multi user [Enter] ? yo`:. :o
>>> `+-
>>> ? 2. Boot Single user ? y/ -/` -o/
>>> ? 3. Escape to loader prompt ? .-
>>> ::/sy+:.
>>> ? 4. Reboot ? / `--
>>> /
>>> ? ? `:
>>> :`
>>> ? Options: ? `:
>>> :`
>>> ? 5. Kernel: default/kernel (1 of 1) ? /
>>> /
>>> ? 6. Boot Options ? .-
>>> -.
>>> ? ? -- -.
>>> ? ? `:` `:`
>>> ? ? .-- `--.
>>> ??????????????????????????????????????????? .---.....----.
>>> Autoboot in 9 seconds, hit [Enter] to boot or any other key to stop
>>>
>>> Loading kernel...
>>> /boot/kernel/kernel text=0x95047c data=0x1919d0+0x84aa94
>>> syms=[0x8+0x13aaa8+0x8+0x12610d]
>>> Loading configured modules...
>>> can't find '/boot/entropy'
>>> Using DTB provided by EFI at 0x8000000.
>>> ---<<BOOT>>---
>>> KDB: debugger backends: ddb
>>> KDB: current backend: ddb
>>> Copyright (c) 1992-2019 The FreeBSD Project.
>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>>> The Regents of the University of California. All rights reserved.
>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>> FreeBSD 13.0-CURRENT 17a1fc80d57-c261519(upstream_master) GENERIC arm64
>>> FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM
>>> 8.0.0)
>>> WARNING: WITNESS option enabled, expect reduced performance.
>>> VT: init without driver.
>>> Starting CPU 1 (1)
>>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>>> [...]
>>>
>>> Best regards,
>>> Marcin
>>>
>>> pon., 12 sie 2019 o 23:14 Mit Matelske <mit at pt.net <mailto:mit at pt.net>> napisa?(a):
>>>
>>>
>>> Soren-
>>>
>>> Thanks for the quick response. I built this kernel with revision 350924.
>>> I'll dig into whats going on in the morning.
>>>
>>> Mind posting your diff for your loader.efi?
>>>
>>> Thanks again!
>>>
>>> Mit
>>>
>>>
>>> ----- Original Message -----
>>> From: "Søren Schmidt" <soren.schmidt at gmail.com <mailto:soren.schmidt at gmail.com>>
>>> To: "Mit Matelske" <mit at pt.net <mailto:mit at pt.net>>
>>> Cc: "tscho" <johannes at t-beutel.com <mailto:johannes at t-beutel.com>>, "freebsd-arm" <
>>> freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org>>
>>> Sent: Monday, August 12, 2019 3:49:48 PM
>>> Subject: Re: Espressobin anyone ?
>>>
>>> Hi
>>>
>>> Looks like your sources may be too old, you need to be at least at r348882
>>> to get the fix for the SD card VCC regulator.
>>>
>>> That change fixed it for me backported to 12-stable...
>>>
>>> The currdev problem still exists, I have it hardwired in my loader for
>>> aarch64 :)
>>>
>>> -Søren
>>>
>>>
>>> On 12 Aug 2019, at 21.06, Mit Matelske <mit at pt.net <mailto:mit at pt.net>> wrote:
>>>
>>> I'm having a couple little hiccups booting this board also. One has
>>> been commented on already, that I can't get the loader to automatically
>>> start loading the kernel on "disk0p2"...
>>>
>>> The second, is that the kernel can't find the SD card after booting so
>>> it can't mount the root filesystem. I'm using the dts/dtb and kernel from
>>> the 13-current branch.
>>>
>>> Thanks for any and all help. I haven't used u-boot in about decade.
>>> Spoiled by the x86 platform.
>>>
>>> Mit Matelske
>>>
>>>
>>> ***U-boot environment:***
>>>
>>>
>>> Marvell>> printenv
>>> baudrate=115200
>>> bootargs=console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000
>>> root=/dev/mmcblk0p1 rw rootwait net.ifnames=0 biosdevname=0
>>> bootcmd=mmc dev 0; fatload mmc 0:1 $kernel_addr $image_name;fatload mmc
>>> 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr
>>> bootdelay=2
>>> bootmmc=mmc dev 0; fatload mmc 0:1 $kernel_addr $image_name;fatload mmc
>>> 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr
>>> console=console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000
>>> eth1addr=00:51:82:11:22:01
>>> eth2addr=00:51:82:11:22:02
>>> eth3addr=00:51:82:11:22:03
>>> ethact=neta at 30000
>>> ethaddr=F0:AD:4E:09:6B:8F
>>> ethprime=eth0
>>> fdt_addr=0x4f00000
>>> fdt_high=0xffffffffffffffff
>>> fdt_name=efi/boot/armada-3720-espressobin.dtb
>>> fdtcontroladdr=3f7161b8
>>> gatewayip=10.4.50.254
>>> get_images=tftpboot $kernel_addr $image_name; tftpboot $fdt_addr
>>> $fdt_name; run get_ramfs
>>> get_ramfs=if test "${ramfs_name}" != "-"; then setenv ramfs_addr
>>> 0x8000000; tftpboot $ramfs_addr $ramfs_name; else setenv ramfs_addr -;fi
>>> hostname=marvell
>>> image_name=efi/freebsd/loader.efi
>>> initrd_addr=0xa00000
>>> initrd_size=0x2000000
>>> ipaddr=0.0.0.0
>>> kernel_addr=0x5000000
>>> loadaddr=0x5000000
>>> netdev=eth0
>>> netmask=255.255.255.0
>>> ramfs_addr=0x8000000
>>> ramfs_name=-
>>> root=root=/dev/nfs rw
>>> rootpath=/srv/nfs/
>>> serverip=0.0.0.0
>>> set_bootargs=setenv bootargs $console $root
>>> ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:none
>>> nfsroot=$serverip:$rootpath $extra_params
>>> stderr=serial at 12000
>>> stdin=serial at 12000
>>> stdout=serial at 12000
>>>
>>>
>>> ***Full boot logs:***
>>>
>>>
>>> U-Boot 2017.03-armada-17.10.2-g14aeedc (Jun 01 2018 - 15:39:10 +0800)
>>>
>>> Model: Marvell Armada 3720 Community Board ESPRESSOBin
>>> CPU @ 1000 [MHz]
>>> L2 @ 800 [MHz]
>>> TClock @ 200 [MHz]
>>> DDR @ 800 [MHz]
>>> DRAM: 1 GiB
>>> U-Boot DT blob at : 000000003f7161b8
>>> Comphy-0: USB3 5 Gbps
>>> Comphy-1: PEX0 2.5 Gbps
>>> Comphy-2: SATA0 6 Gbps
>>> SATA link 0 timeout.
>>> AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
>>> flags: ncq led only pmp fbss pio slum part sxs
>>> PCIE-0: Link down
>>> MMC: sdhci at d0000: 0, sdhci at d8000: 1
>>> SF: Detected mx25u3235f with page size 256 Bytes, erase size 64 KiB,
>>> total 4 MiB
>>> Net: eth0: neta at 30000 [PRIME]
>>> Hit any key to stop autoboot: 0
>>> switch to partitions #0, OK
>>> mmc0 is current device
>>> reading efi/freebsd/loader.efi
>>> 603872 bytes read in 49 ms (11.8 MiB/s)
>>> reading efi/boot/armada-3720-espressobin.dtb
>>> 15946 bytes read in 17 ms (916 KiB/s)
>>> ## Starting EFI application at 05000000 ...
>>> Scanning disk sdhci at d0000.blk <mailto:sdhci at d0000.blk>...
>>> Card did not respond to voltage select!
>>> mmc_init: -95, time 50
>>> Found 1 disks
>>> Consoles: EFI console
>>> FreeBSD/arm64 EFI loader, Revision 1.1
>>>
>>> Command line arguments: loader.efi
>>> EFI version: 2.05
>>> EFI Firmware: Das U-boot (rev 0.00)
>>> Console: efi (0)
>>> Failed to find bootable partition
>>> Startup error in /boot/lua/loader.lua: seconds
>>> LUA ERROR: cannot open /boot/lua/loader.lua: invalid argument.
>>>
>>> can't load 'kernel'
>>>
>>> Type '?' for a list of commands, 'help' for more detailed help.
>>> OK
>>> OK set currdev=disk0p2
>>> OK boot
>>>
>>> /boot/kernel/kernel text=0x97d6a0 data=0x191b50+0x84ae94
>>> syms=[0x8+0x137dd8+0x8+0x126260]
>>> Using DTB provided by EFI at 0x8000000.
>>> ---<<BOOT>>---
>>> KDB: debugger backends: ddb
>>> KDB: current backend: ddb
>>> Copyright (c) 1992-2019 The FreeBSD Project.
>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>>> The Regents of the University of California. All rights reserved.
>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>> FreeBSD 13.0-CURRENT GENERIC arm64
>>> FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on
>>> LLVM 6.0.1)
>>> WARNING: WITNESS option enabled, expect reduced performance.
>>> VT: init without driver.
>>> Starting CPU 1 (1)
>>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>>> arc4random: WARNING: initial seeding bypassed the cryptographic random
>>> device because it was not yet seeded and the knob 'bypass_before_seeding'
>>> was enabled.
>>> random: entropy device external interface
>>> MAP 3e681000 mode 2 pages 1
>>> MAP 3ffa6000 mode 2 pages 1
>>> kbd0 at kbdmux0
>>> ofwbus0: <Open Firmware Device Tree>
>>> simplebus0: <Flattened device tree simple bus> on ofwbus0
>>> simplebus1: <Flattened device tree simple bus> on simplebus0
>>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem
>>> 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1
>>> simple_mfd1: <Simple MFD (Multi-Functions Device)> mem
>>> 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1
>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
>>> gic0: <ARM Generic Interrupt Controller v3.0> mem
>>> 0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1d91fff,0x1da0000-0x1dbffff
>>> irq 27 on simplebus1
>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
>>> simple_mfd0
>>> gpio0: cannot allocate memory window
>>> device_attach: gpio0 attach returned 6
>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
>>> gpio0: cannot allocate memory window
>>> device_attach: gpio0 attach returned 6
>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
>>> gpioregulator0: cannot get pin 0
>>> gpioregulator0: cannot parse parameters
>>> device_attach: gpioregulator0 attach returned 6
>>> generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
>>> Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality 1000
>>> Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000
>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
>>> simple_mfd0
>>> gpio0: cannot allocate memory window
>>> device_attach: gpio0 attach returned 6
>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
>>> gpio0: cannot allocate memory window
>>> device_attach: gpio0 attach returned 6
>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
>>> gpioregulator0: cannot get pin 0
>>> gpioregulator0: cannot parse parameters
>>> device_attach: gpioregulator0 attach returned 6
>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
>>> simple_mfd0
>>> gpio0: cannot allocate memory window
>>> device_attach: gpio0 attach returned 6
>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
>>> gpio0: cannot allocate memory window
>>> device_attach: gpio0 attach returned 6
>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
>>> gpioregulator0: cannot get pin 0
>>> gpioregulator0: cannot parse parameters
>>> device_attach: gpioregulator0 attach returned 6
>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
>>> simple_mfd0
>>> gpio0: cannot allocate memory window
>>> device_attach: gpio0 attach returned 6
>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
>>> gpio0: cannot allocate memory window
>>> device_attach: gpio0 attach returned 6
>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
>>> gpioregulator0: cannot get pin 0
>>> gpioregulator0: cannot parse parameters
>>> device_attach: gpioregulator0 attach returned 6
>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
>>> simple_mfd0
>>> gpio0: cannot allocate memory window
>>> device_attach: gpio0 attach returned 6
>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
>>> gpio0: cannot allocate memory window
>>> device_attach: gpio0 attach returned 6
>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
>>> gpioregulator0: cannot get pin 0
>>> gpioregulator0: cannot parse parameters
>>> device_attach: gpioregulator0 attach returned 6
>>> cpulist0: <Open Firmware CPU Group> on ofwbus0
>>> cpu0: <Open Firmware CPU> on cpulist0
>>> cpu1: <Open Firmware CPU> on cpulist0
>>> pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0
>>> syscon_generic0: <syscon> mem 0xd000-0xdfff on simplebus1
>>> syscon_generic1: <syscon> mem 0x11500-0x1153f on simplebus1
>>> uart0: <Marvell Armada 3700 UART> mem 0x12000-0x121ff irq 9,10,11 on
>>> simplebus1
>>> uart0: console (115200,n,8,1)
>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on
>>> simple_mfd0
>>> gpio0: cannot allocate memory window
>>> device_attach: gpio0 attach returned 6
>>> syscon_generic2: <syscon> mem 0x14000-0x1405f on simplebus1
>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
>>> gpio0: cannot allocate memory window
>>> device_attach: gpio0 attach returned 6
>>> mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on simplebus1
>>> mvneta0: version is 10
>>> mvneta0: Ethernet address: 00:a6:39:ca:e8:00
>>> mdio0: <MDIO> on mvneta0
>>> mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
>>> e6000sw0: <Marvell 88E6341> on mdio0
>>> e6000sw0: multi-chip addressing mode (0x1)
>>> e6000sw0: CPU port at 0
>>> e6000sw0: fixed port at 0
>>> e6000sw0: PHY at port 1
>>> miibus0: <MII bus> on e6000sw0
>>> e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0
>>> e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
>>> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
>>> e6000sw0: PHY at port 2
>>> miibus1: <MII bus> on e6000sw0
>>> e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1
>>> e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
>>> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
>>> e6000sw0: PHY at port 3
>>> miibus2: <MII bus> on e6000sw0
>>> e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2
>>> e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
>>> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
>>> e6000sw0: switch is ready.
>>> etherswitch0: <Switch controller> on e6000sw0
>>> xhci0: <Generic USB 3.0 controller> mem 0x58000-0x5bfff irq 16 on
>>> simplebus1
>>> xhci0: 32 bytes context size, 32-bit DMA
>>> usbus0 on xhci0
>>> syscon_generic3: <syscon> mem 0x5d800-0x5dfff on simplebus1
>>> ehci0: <Marvell Integrated USB 2.0 controller> mem 0x5e000-0x5efff irq
>>> 17 on simplebus1
>>> usbus1: EHCI version 1.0
>>> usbus1 on ehci0
>>> syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1
>>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem
>>> 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
>>> ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on simplebus1
>>> ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS
>>> ahcich0: <AHCI channel> at channel 0 on ahci0
>>> device_attach: ahcich0 attach returned 6
>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
>>> gpioregulator0: cannot get pin 0
>>> gpioregulator0: cannot parse parameters
>>> device_attach: gpioregulator0 attach returned 6
>>> cryptosoft0: <software crypto>
>>> Timecounters tick every 1.000 msec
>>> mvneta0: link state changed to UP
>>> e6000sw0port1: link state changed to DOWN
>>> e6000sw0port2: link state changed to DOWN
>>> e6000sw0port3: link state changed to DOWN
>>> usbus0: 5.0Gbps Super Speed USB v3.0
>>> usbus1: 480Mbps High Speed USB v2.0
>>> Release APs...done
>>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0
>>> Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
>>> Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
>>> Instruction Set Attributes 1 = <>
>>> Root mount waiting for: Processor Features 0 =
>>> <GIC,AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
>>> usbus1 Processor Features 1 = <0>
>>> usbus0 Memory Model Features 0 = <4k Granule,64k Granule,S/NS
>>> Mem,MixedEndian,16bit ASID,1TB PA>
>>>
>>> Memory Model Features 1 = <>
>>> Memory Model Features 2 = <32b CCIDX,48b VA>
>>> Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6
>>> Breakpoints,PMUv3,Debug v8>
>>> Debug Features 1 = <0>
>>> Auxiliary Features 0 = <0>
>>> Auxiliary Features 1 = <0>
>>> CPU 1: ARM Cortex-A53 r0p4 affinity: 1
>>> WARNING: WITNESS option enabled, expect reduced performance.
>>> ugen0.1: <Generic XHCI root HUB> at usbus0
>>> ugen1.1: <Marvell EHCI root HUB> at usbus1
>>> uhub0 on usbus0
>>> uhub1 on usbus1
>>> uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on
>>> usbus0
>>> uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
>>> usbus1
>>> uhub0: 2 ports with 2 removable, self powered
>>> uhub1: 1 port with 1 removable, self powered
>>> mountroot: waiting for device /dev/ufs/FreeBSD_Install...
>>> Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19.
>>>
>>> Loader variables:
>>> vfs.root.mountfrom=ufs:/dev/ufs/FreeBSD_Install
>>> vfs.root.mountfrom.options=ro,noatime
>>>
>>> Manual root filesystem specification:
>>> <fstype>:<device> [options]
>>> Mount <device> using filesystem <fstype>
>>> and with the specified (optional) option list.
>>>
>>> eg. ufs:/dev/da0s1a
>>> zfs:zroot/ROOT/default
>>> cd9660:/dev/cd0 ro
>>> (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
>>>
>>> ? List valid disk boot devices
>>> . Yield 1 second (for background tasks)
>>> <empty line> Abort manual input
>>>
>>> mountroot> ?
>>>
>>> List of GEOM managed disk devices:
>>>
>>>
>>> mountroot>
>>> _______________________________________________
>>> freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org> mailing list
>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm <https://lists.freebsd.org/mailman/listinfo/freebsd-arm>
>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org <mailto:freebsd-arm-unsubscribe at freebsd.org>"
>>>
>>> _______________________________________________
>>> freebsd-arm at freebsd.org <mailto:freebsd-arm at freebsd.org> mailing list
>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm <https://lists.freebsd.org/mailman/listinfo/freebsd-arm>
>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org <mailto:freebsd-arm-unsubscribe at freebsd.org>"
>>
>
>
> --
> Emmanuel Vadot <manu at bidouilliste.com> <manu at freebsd.org>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: Message signed with OpenPGP
URL: <http://lists.freebsd.org/pipermail/freebsd-arm/attachments/20190815/d10ee846/attachment.sig>
More information about the freebsd-arm
mailing list