Attempted large jump to head -r337347 for pine64+ 2GB did not finish the boot: eventual MMC handling problems before root file system is mounted
Emmanuel Vadot
manu at bidouilliste.com
Mon Aug 6 17:37:58 UTC 2018
On Mon, 6 Aug 2018 10:12:43 -0700
Mark Millard <marklmi at yahoo.com> wrote:
> On 2018-Aug-6, at 3:44 AM, Emmanuel Vadot <manu at bidouilliste.com> wrote:
>
> > On Mon, 6 Aug 2018 02:48:57 -0700
> > Mark Millard via freebsd-arm <freebsd-arm at freebsd.org> wrote:
> >
> >> I amd64 -> aarch64 cross built -r337347 and installed it
> >> (and 2018.07 u-boot-sunxi-with-spl.bin and loader.efi as
> >> bootaa64.efi) as an update. My attempted synchronization
> >> of loader.conf and ttys and devd.conf may be incorrect.
> >> (Previous to this the Pine64+ 2GB seemed to be working
> >> okay but it was at a very old build.)
> >>
> >> The kernel config has GENERIC included but the various
> >> debug features disabled. (My typical operating
> >> environment.)
> >>
> >> For all I know what the below shows might be expected
> >> at this point. The kernel seems to have problems with
> >> the MMC (that the kernel was loaded from). No other
> >> media are attached. mmcsd0 is really an 128 GiByte
> >> emmc on an adapter. (This historically worked for me.)
> >
> > emmc to sd ? that's weird ...
>
> An example of the adapter I've used for this is:
>
> https://ameridroid.com/collections/storage-emmc-and-microsd/products/emmc-adapter
So this is a passive adapter, maybe that's something that should work
but it's definitly is something that calls for problems.
> emmc is multi-mode for its allowed modes of operation. Thus
> its ability to frequently be used this way, such as via HS200.
> emmc is commonly more robust as I understand.
I didn't understand a word.
>
> (I had to modify the case the pine64+ 2GB is in in order for
> the adapter/emmc combination to fit in all the way.)
>
> > Can you boot -v and post the result please ?
>
> Glad to . . .
>
> DRAM: 2048 MiB
> Trying to boot from MMC1
>
>
> U-Boot SPL 2018.07 (Aug 02 2018 - 18:42:28 +0000)
> DU-Boot 2018.07 (Aug 02 2018 - 18:42:28 +0000) Allwinner Technology
>
> CPU: Allwinner A64 (SUN50I)
> Model: Pine64+
> DRAM: 2 GiB
> MMC: SUNXI SD/MMC: 0
> Loading Environment from FAT... *** Warning - bad CRC, using default environment
>
> Failed (-5)
> In: serial
> Out: serial
> Err: serial
> Net: phy interface7
> eth0: ethernet at 1c30000
> starting USB...
> USB0: USB EHCI 1.00
> USB1: USB OHCI 1.0
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning usb for storage devices... 0 Storage Device(s) found
> Hit any key to stop autoboot: 0
> switch to partitions #0, OK
> mmc0(part 0) is current device
> Scanning mmc 0:1...
> Found EFI removable media binary efi/boot/bootaa64.efi
> libfdt fdt_check_header(): FDT_ERR_BADMAGIC
> Scanning disks on usb...
> Disk usb0 not ready
> Disk usb1 not ready
> Disk usb2 not ready
> Disk usb3 not ready
> Scanning disks on mmc...
> MMC Device 1 not found
> MMC Device 2 not found
> MMC Device 3 not found
> Found 3 disks
> 477384 bytes read in 25 ms (18.2 MiB/s)
> libfdt fdt_check_header(): FDT_ERR_BADMAGIC
> ## Starting EFI application at 40080000 ...
> Consoles: EFI console
> FreeBSD/arm64 EFI loader, Revision 1.1
>
> Command line arguments: loader.efi
> EFI version: 2.70
> EFI Firmware: Das U-Boot (rev 0.00)
> Console: efi (0)
> Load Path: /\efi\boot\bootaa64.efi
> Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/USB(0x6,0x0)/HD(1,0x01,0,0x403b,0x1ffe0)
> Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/USB(0x6,0x0)/HD(1,0x01,0,0x403b,0x1ffe0)
> Setting currdev to disk0p1:
> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/USB(0x6,0x0)/HD(2,0x01,0,0x24400,0xe600000)
> Setting currdev to disk0p2:
> Loading /boot/defaults/loader.conf
> /boot/kernel/kernel text=0x8ce84a data=0x148020+0x72caac syms=[0x8+0x11d000+0x8+0x1108a8]
> /boot/entropy size=0x1000
> /boot/kernel/umodem.ko text=0x2168 text=0x1410 data=0x102d0+0xfd40 syms=[0x8+0xf30+0x8+0xb73]
>
> Hit [Enter] to boot immediately, or any other key for command prompt.
> Booting [/boot/kernel/kernel] in 9 seconds...
>
> Type '?' for a list of commands, 'help' for more detailed help.
> OK boot -v
> Booting...
> Using DTB provided by EFI at 0x47ffc000.
> EHCI failed to shut down host controller.
> KDB: debugger backends: ddb
> KDB: current backend: ddb
> Type Physical Virtual #Pages Attr
> ConventionalMemory 000040000000 40000000 00007ffc WB
> Reserved 000047ffc000 47ffc000 00000003 WB
> RuntimeServicesData 000047fff000 47fff000 00000001 WB RUNTIME
> Reserved 000048000000 48000000 00000003 WB
> RuntimeServicesData 000048003000 48003000 00000001 WB RUNTIME
> ConventionalMemory 000048005000 40000000 00068ea1 WB
> LoaderData 0000b0ea6000 b0ea6000 00000001 WB
> Reserved 0000b0ea7000 b0ea7000 00000001 WB
> Reserved 0000b0ea8000 b0ea8000 00000001 WB
> LoaderData 0000b0ea9000 b0ea9000 00004000 WB
> LoaderData 0000b4ea9000 b4ea9000 00004000 WB
> LoaderCode 0000b8ea9000 b8ea9000 00000075 WB
> Reserved 0000b8f1e000 b8f1e000 00000001 WB
> Reserved 0000b8f1f000 b8f1f000 00000001 WB
> RuntimeServicesData 0000b8f20000 b8f20000 00000001 WB RUNTIME
> Reserved 0000b8f21000 b8f21000 00000001 WB
> Reserved 0000b8f22000 b8f22000 00000001 WB
> Reserved 0000b8f23000 b8f23000 00000001 WB
> Reserved 0000b8f24000 b8f24000 00000001 WB
> LoaderData 0000b8f25000 b8f25000 00005094 WB
> RuntimeServicesCode 0000bdfb9000 bdfb9000 00000002 WB RUNTIME
> LoaderData 0000bdfbb000 b8f25000 00002045 WB
> Physical memory chunk(s):
> 0x40000000 - 0x47ffbfff, 127 MB ( 32764 pages)
> 0x47fff000 - 0x47ffffff, 0 MB ( 1 pages)
> 0x48003000 - 0x48003fff, 0 MB ( 1 pages)
> 0x48005000 - 0xb0ea6fff, 1678 MB ( 429730 pages)
> 0xb0ea9000 - 0xb8f1dfff, 128 MB ( 32885 pages)
> 0xb8f20000 - 0xb8f20fff, 0 MB ( 1 pages)
> 0xb8f25000 - 0xbdfb8fff, 80 MB ( 20628 pages)
> 0xbdfbb000 - 0xbfffffff, 32 MB ( 8261 pages)
> Excluded memory regions:
> 0x47ffc000 - 0x48003fff, 0 MB ( 8 pages) NoAlloc
> 0xb0ea7000 - 0xb0ea8fff, 0 MB ( 2 pages) NoAlloc
> 0xb1000000 - 0xb25e1fff, 21 MB ( 5602 pages) NoAlloc
> 0xb8f1e000 - 0xb8f24fff, 0 MB ( 7 pages) NoAlloc
> 0xbdfb9000 - 0xbdfbafff, 0 MB ( 2 pages) NoAlloc
> Found 4 CPUs in the device tree
> Copyright (c) 1992-2018 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 12.0-CURRENT r337347M arm64
> FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
> VT: init without driver.
> Preloaded elf kernel "/boot/kernel/kernel" at 0xffff0000013b9000.
> Preloaded boot_entropy_cache "/boot/entropy" at 0xffff0000013c2020.
> Preloaded elf module "/boot/kernel/umodem.ko" at 0xffff0000013c2078.
> KLD file umodem.ko is missing dependencies
> Starting CPU 1 (1)
> Starting CPU 2 (2)
> Starting CPU 3 (3)
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> random: read 3840 bytes from preloaded cache
> random: unblocking device.
> arc4random: read 32 bytes from preloaded cache
> VIMAGE (virtualized network stack) enabled
> ULE: setup cpu 0
> ULE: setup cpu 1
> ULE: setup cpu 2
> ULE: setup cpu 3
> random: entropy device external interface
> MAP 47fff000 mode 2 pages 1
> MAP 48003000 mode 2 pages 1
> MAP b8f20000 mode 2 pages 1
> MAP bdfb9000 mode 2 pages 2
> nfslock: pseudo-device
> crypto: <crypto core>
> kbd0 at kbdmux0
> mem: <memory>
> null: <full device, null device, zero device>
> openfirm: <Open Firmware control device>
> random: harvesting attach, 8 bytes (4 bits) from nexus0
> ofwbus0: <Open Firmware Device Tree>
> clk_fixed0: <Fixed clock> on ofwbus0
> random: harvesting attach, 8 bytes (4 bits) from clk_fixed0
> clk_fixed1: <Fixed clock> on ofwbus0
> random: harvesting attach, 8 bytes (4 bits) from clk_fixed1
> clk_fixed2: <Fixed clock> on ofwbus0
> random: harvesting attach, 8 bytes (4 bits) from clk_fixed2
> simplebus0: <Flattened device tree simple bus> on ofwbus0
> ccu_a64ng0: <Allwinner A64 Clock Control Unit NG> mem 0x1c20000-0x1c203ff on simplebus0
> ccu_a64ng0: Setting pll_periph0 as parent for ahb1
> ccu_a64ng0: Setting pll_periph0 as parent for ahb2
> ccu_a64ng0: Setting pll_ddr0 as parent for dram
> Clock: pll_cpux, parent: osc24M(0), freq: 816000000
> Clock: pll_audio, parent: osc24M(0), freq: 24571428
> Clock: pll_periph0_2x, parent: osc24M(0), freq: 600000000
> Clock: pll_periph1_2x, parent: osc24M(0), freq: 600000000
> Clock: pll_ddr0, parent: osc24M(0), freq: 408000000
> Clock: pll_ddr1, parent: osc24M(0), freq: 1344000000
> Clock: pll_video0, parent: osc24M(0), freq: 30303
> Clock: pll_video1, parent: osc24M(0), freq: 30303
> Clock: pll_ve, parent: osc24M(0), freq: 30303
> Clock: pll_gpu, parent: osc24M(0), freq: 30303
> Clock: pll_de, parent: osc24M(0), freq: 30303
> Clock: pll_hsic, parent: osc24M(0), freq: 1200000
> Clock: apb2, parent: osc24M(1), freq: 24000000
> Clock: nand, parent: osc24M(0), freq: 24000000
> Clock: mmc0, parent: pll_periph0_2x(1), freq: 50000000
> Clock: mmc1, parent: osc24M(0), freq: 24000000
> Clock: mmc2, parent: osc24M(0), freq: 24000000
> Clock: ts, parent: osc24M(0), freq: 24000000
> Clock: ce, parent: osc24M(0), freq: 24000000
> Clock: spi0, parent: osc24M(0), freq: 24000000
> Clock: spi1, parent: osc24M(0), freq: 24000000
> Clock: spdif, parent: pll_audio(0), freq: 24571428
> Clock: dram, parent: pll_ddr0(0), freq: 408000000
> Clock: de, parent: pll_periph0_2x(0), freq: 600000000
> Clock: deinterlace, parent: pll_periph0(0), freq: 300000000
> Clock: csi-sclk, parent: pll_periph0(0), freq: 300000000
> Clock: csi-mclk, parent: osc24M(0), freq: 24000000
> Clock: ve, parent: pll_ve(0), freq: 30303
> Clock: hdmi, parent: pll_video0(0), freq: 30303
> Clock: mbus, parent: pll_periph0_2x(1), freq: 200000000
> Clock: gpu, parent: pll_gpu(0), freq: 30303
> Clock: ahb1, parent: pll_periph0(3), freq: 300000000
> Clock: ahb2, parent: pll_periph0(1), freq: 150000000
> Clock: cpux, parent: pll_cpux(2), freq: 816000000
> Clock: i2s0mux, parent: pll_audio-8x(0), freq: 196571424
> Clock: i2s1mux, parent: pll_audio-8x(0), freq: 196571424
> Clock: i2s2mux, parent: pll_audio-8x(0), freq: 196571424
> Clock: axi, parent: cpux(0), freq: 204000000
> Clock: apb1, parent: ahb1(0), freq: 75000000
> Clock: apb, parent: cpux(0), freq: 272000000
> Clock: thsdiv, parent: osc24M(0), freq: 12000000
> Clock: osc12M, parent: osc24M(0), freq: 12000000
> Clock: pll_periph0, parent: pll_periph0_2x(0), freq: 300000000
> Clock: pll_periph1, parent: pll_periph1_2x(0), freq: 300000000
> Clock: pll_audio-2x, parent: pll_audio(0), freq: 49142856
> Clock: pll_audio-4x, parent: pll_audio(0), freq: 98285712
> Clock: pll_audio-8x, parent: pll_audio(0), freq: 196571424
> Clock: bus-mipi-dsi, parent: ahb1(0), freq: 300000000
> Clock: bus-ce, parent: ahb1(0), freq: 300000000
> Clock: bus-dma, parent: ahb1(0), freq: 300000000
> Clock: bus-mmc0, parent: ahb1(0), freq: 300000000
> Clock: bus-mmc1, parent: ahb1(0), freq: 300000000
> Clock: bus-mmc2, parent: ahb1(0), freq: 300000000
> Clock: bus-nand, parent: ahb1(0), freq: 300000000
> Clock: bus-dram, parent: ahb1(0), freq: 300000000
> Clock: bus-emac, parent: ahb2(0), freq: 150000000
> Clock: bus-ts, parent: ahb1(0), freq: 300000000
> Clock: bus-hstimer, parent: ahb1(0), freq: 300000000
> Clock: bus-spi0, parent: ahb1(0), freq: 300000000
> Clock: bus-spi1, parent: ahb1(0), freq: 300000000
> Clock: bus-otg, parent: ahb1(0), freq: 300000000
> Clock: bus-ehci0, parent: ahb1(0), freq: 300000000
> Clock: bus-ehci1, parent: ahb2(0), freq: 150000000
> Clock: bus-ohci0, parent: ahb1(0), freq: 300000000
> Clock: bus-ohci1, parent: ahb2(0), freq: 150000000
> Clock: bus-ve, parent: ahb1(0), freq: 300000000
> Clock: bus-tcon0, parent: ahb1(0), freq: 300000000
> Clock: bus-tcon1, parent: ahb1(0), freq: 300000000
> Clock: bus-deinterlace, parent: ahb1(0), freq: 300000000
> Clock: bus-csi, parent: ahb1(0), freq: 300000000
> Clock: bus-hdmi, parent: ahb1(0), freq: 300000000
> Clock: bus-de, parent: ahb1(0), freq: 300000000
> Clock: bus-gpu, parent: ahb1(0), freq: 300000000
> Clock: bus-msgbox, parent: ahb1(0), freq: 300000000
> Clock: bus-spinlock, parent: ahb1(0), freq: 300000000
> Clock: bus-codec, parent: apb1(0), freq: 75000000
> Clock: bus-spdif, parent: apb1(0), freq: 75000000
> Clock: bus-pio, parent: apb1(0), freq: 75000000
> Clock: bus-ths, parent: apb1(0), freq: 75000000
> Clock: bus-i2s0, parent: apb1(0), freq: 75000000
> Clock: bus-i2s1, parent: apb1(0), freq: 75000000
> Clock: bus-i2s2, parent: apb1(0), freq: 75000000
> Clock: bus-i2c0, parent: apb2(0), freq: 24000000
> Clock: bus-i2c1, parent: apb2(0), freq: 24000000
> Clock: bus-i2c2, parent: apb2(0), freq: 24000000
> Clock: bus-src, parent: apb2(0), freq: 24000000
> Clock: bus-uart0, parent: apb2(0), freq: 24000000
> Clock: bus-uart1, parent: apb2(0), freq: 24000000
> Clock: bus-uart2, parent: apb2(0), freq: 24000000
> Clock: bus-uart3, parent: apb2(0), freq: 24000000
> Clock: bus-uart4, parent: apb2(0), freq: 24000000
> Clock: bus-dbg, parent: ahb1(0), freq: 300000000
> Clock: ths, parent: thsdiv(0), freq: 12000000
> Clock: usb-phy0, parent: osc24M(0), freq: 24000000
> Clock: usb-phy1, parent: osc24M(0), freq: 24000000
> Clock: usb-hsic, parent: pll_hsic(0), freq: 1200000
> Clock: usb-hsic-12M, parent: osc12M(0), freq: 12000000
> Clock: usb-ohci0, parent: osc12M(0), freq: 12000000
> Clock: usb-ohci1, parent: usb-ohci0(0), freq: 12000000
> Clock: dram-ve, parent: dram(0), freq: 408000000
> Clock: dram-csi, parent: dram(0), freq: 408000000
> Clock: dram-deinterlace, parent: dram(0), freq: 408000000
> Clock: dram-ts, parent: dram(0), freq: 408000000
> Clock: csi-misc, parent: osc24M(0), freq: 24000000
> Clock: ac-dig, parent: pll_audio(0), freq: 24571428
> Clock: ac-dig-4x, parent: pll_audio-4x(0), freq: 98285712
> Clock: avs, parent: osc24M(0), freq: 24000000
> Clock: hdmi-ddc, parent: osc24M(0), freq: 24000000
> random: harvesting attach, 8 bytes (4 bits) from ccu_a64ng0
> iichb0: <Allwinner Integrated I2C Bus Controller> mem 0x1c2b000-0x1c2b3ff irq 21 on simplebus0
> iicbus0: <OFW I2C bus> on iichb0
> random: harvesting attach, 8 bytes (4 bits) from iicbus0
> random: harvesting attach, 8 bytes (4 bits) from iichb0
> random: harvesting attach, 8 bytes (4 bits) from simplebus0
> regfix0: <Fixed Regulator> on ofwbus0
> random: harvesting attach, 8 bytes (4 bits) from regfix0
> random: harvesting attach, 8 bytes (4 bits) from ofwbus0
> ccu_sun8i_r0: <Allwinner SUN8I_R Clock Control Unit NG> mem 0x1f01400-0x1f014ff on simplebus0
> Clock: ar100, parent: osc32k(0), freq: 32768
> Clock: apb0, parent: ahb0(0), freq: 32768
> Clock: ahb0, parent: ar100(0), freq: 32768
> Clock: ir, parent: osc32k(0), freq: 32768
> Clock: apb0-pio, parent: apb0(0), freq: 32768
> Clock: apb0-ir, parent: apb0(0), freq: 32768
> Clock: apb0-timer, parent: apb0(0), freq: 32768
> Clock: apb0-rsb, parent: apb0(0), freq: 32768
> Clock: apb0-uart, parent: apb0(0), freq: 32768
> Clock: apb0-i2c, parent: apb0(0), freq: 32768
> Clock: apb0-twd, parent: apb0(0), freq: 32768
> random: harvesting attach, 8 bytes (4 bits) from ccu_sun8i_r0
> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
> psci0: PSCI version 0.2 compatible
> random: harvesting attach, 8 bytes (4 bits) from psci0
> gic0: <ARM Generic Interrupt Controller> mem 0x1c81000-0x1c81fff,0x1c82000-0x1c83fff,0x1c84000-0x1c85fff,0x1c86000-0x1c87fff irq 23 on simplebus0
> gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 224
> random: harvesting attach, 8 bytes (4 bits) from gic0
> gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq 12,13,14 on simplebus0
> gpiobus0: <OFW GPIO bus> on gpio0
> random: harvesting attach, 8 bytes (4 bits) from gpiobus0
> Processing 1 pin-config node(s) in pinctrl-0 for mmc at 1c0f000
> Processing 1 pin-config node(s) in pinctrl-0 for serial at 1c28000
> Processing 1 pin-config node(s) in pinctrl-0 for i2c at 1c2b000
> Processing 1 pin-config node(s) in pinctrl-0 for ethernet at 1c30000
> Processing 1 pin-config node(s) in pinctrl-0 for mmc at 1c0f000
> Processing 1 pin-config node(s) in pinctrl-0 for serial at 1c28000
> Processing 1 pin-config node(s) in pinctrl-0 for i2c at 1c2b000
> Processing 1 pin-config node(s) in pinctrl-0 for ethernet at 1c30000
> random: harvesting attach, 8 bytes (4 bits) from gpio0
> gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq 26 on simplebus0
> gpiobus1: <OFW GPIO bus> on gpio1
> random: harvesting attach, 8 bytes (4 bits) from gpiobus1
> Processing 1 pin-config node(s) in pinctrl-0 for mmc at 1c0f000
> Processing 1 pin-config node(s) in pinctrl-0 for serial at 1c28000
> Processing 1 pin-config node(s) in pinctrl-0 for i2c at 1c2b000
> Processing 1 pin-config node(s) in pinctrl-0 for ethernet at 1c30000
> Processing 1 pin-config node(s) in pinctrl-0 for mmc at 1c0f000
> Processing 1 pin-config node(s) in pinctrl-0 for serial at 1c28000
> Processing 1 pin-config node(s) in pinctrl-0 for i2c at 1c2b000
> Processing 1 pin-config node(s) in pinctrl-0 for ethernet at 1c30000
> random: harvesting attach, 8 bytes (4 bits) from gpio1
> generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
> random: harvesting attach, 8 bytes (4 bits) from generic_timer0
> rtc0: <Allwinner RTC> mem 0x1f00000-0x1f00053 irq 24,25 on simplebus0
> rtc0: Using external oscillator
> rtc0: registered as a time-of-day clock, resolution 1.000000s
> random: harvesting attach, 8 bytes (4 bits) from rtc0
> awusbphy0: <Allwinner USB PHY> mem 0x1c19400-0x1c19413,0x1c1a800-0x1c1a803,0x1c1b800-0x1c1b803 on simplebus0
> random: harvesting attach, 8 bytes (4 bits) from awusbphy0
> efirtc0: cannot read EFI realtime clock
> cpulist0: <Open Firmware CPU Group> on ofwbus0
> cpu0: <Open Firmware CPU> on cpulist0
> cpu0: missing 'clock-frequency' property
> arm64_cpu0: register <0>
> random: harvesting attach, 8 bytes (4 bits) from arm64_cpu0
> random: harvesting attach, 8 bytes (4 bits) from cpu0
> cpu1: <Open Firmware CPU> on cpulist0
> cpu1: missing 'clock-frequency' property
> arm64_cpu1: register <1>
> random: harvesting attach, 8 bytes (4 bits) from arm64_cpu1
> random: harvesting attach, 8 bytes (4 bits) from cpu1
> cpu2: <Open Firmware CPU> on cpulist0
> cpu2: missing 'clock-frequency' property
> arm64_cpu2: register <2>
> random: harvesting attach, 8 bytes (4 bits) from arm64_cpu2
> random: harvesting attach, 8 bytes (4 bits) from cpu2
> cpu3: <Open Firmware CPU> on cpulist0
> cpu3: missing 'clock-frequency' property
> arm64_cpu3: register <3>
> random: harvesting attach, 8 bytes (4 bits) from arm64_cpu3
> random: harvesting attach, 8 bytes (4 bits) from cpu3
> random: harvesting attach, 8 bytes (4 bits) from cpulist0
> aw_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0ffff irq 4 on simplebus0
> aw_mmc0: vmmc-supply regulator found
> mmc0: <MMC/SD bus> on aw_mmc0
> random: harvesting attach, 8 bytes (4 bits) from mmc0
> random: harvesting attach, 8 bytes (4 bits) from aw_mmc0
> simplebus0: <mmc at 1c10000> mem 0x1c10000-0x1c10fff irq 5 disabled compat allwinner,sun50i-a64-mmc (no driver attached)
> simplebus0: <mmc at 1c11000> mem 0x1c11000-0x1c11fff irq 6 disabled compat allwinner,sun50i-a64-emmc (no driver attached)
> simplebus0: <usb at 01c19000> mem 0x1c19000-0x1c193ff irq 7 compat allwinner,sun8i-a33-musb (no driver attached)
> simplebus0: <usb at 01c1a000> mem 0x1c1a000-0x1c1a0ff irq 8 disabled compat allwinner,sun50i-a64-ehci (no driver attached)
> simplebus0: <usb at 01c1a400> mem 0x1c1a400-0x1c1a4ff irq 9 disabled compat allwinner,sun50i-a64-ohci (no driver attached)
> ehci0: <Allwinner Integrated USB 2.0 controller> mem 0x1c1b000-0x1c1b0ff irq 10 on simplebus0
> usbus0: EHCI version 1.0
> usbus0 on ehci0
> ehci0: usbpf: Attached
> random: harvesting attach, 8 bytes (4 bits) from usbus0
> random: harvesting attach, 8 bytes (4 bits) from ehci0
> ohci0: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 11 on simplebus0
> usbus1 on ohci0
> ohci0: usbpf: Attached
> random: harvesting attach, 8 bytes (4 bits) from usbus1
> random: harvesting attach, 8 bytes (4 bits) from ohci0
> gpioc0: <GPIO controller> on gpio0
> random: harvesting attach, 8 bytes (4 bits) from gpioc0
> simplebus0: <pwm at 01c21400> mem 0x1c21400-0x1c21407 disabled compat allwinner,sun50i-a64-pwm (no driver attached)
> uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 15 on simplebus0
> uart0: console (115384,n,8,1)
> uart0: fast interrupt
> uart0: PPS capture mode: DCD
> random: harvesting attach, 8 bytes (4 bits) from uart0
> simplebus0: <serial at 1c28400> mem 0x1c28400-0x1c287ff irq 16 disabled compat snps,dw-apb-uart (no driver attached)
> simplebus0: <serial at 1c28800> mem 0x1c28800-0x1c28bff irq 17 disabled compat snps,dw-apb-uart (no driver attached)
> simplebus0: <serial at 1c28c00> mem 0x1c28c00-0x1c28fff irq 18 disabled compat snps,dw-apb-uart (no driver attached)
> simplebus0: <serial at 1c29000> mem 0x1c29000-0x1c293ff irq 19 disabled compat snps,dw-apb-uart (no driver attached)
> simplebus0: <i2c at 1c2ac00> mem 0x1c2ac00-0x1c2afff irq 20 disabled compat allwinner,sun6i-a31-i2c (no driver attached)
> iic0: <I2C generic I/O> on iicbus0
> random: harvesting attach, 8 bytes (4 bits) from iic0
> simplebus0: <i2c at 1c2b400> mem 0x1c2b400-0x1c2b7ff irq 22 disabled compat allwinner,sun6i-a31-i2c (no driver attached)
> gpioc1: <GPIO controller> on gpio1
> random: harvesting attach, 8 bytes (4 bits) from gpioc1
> syscon_generic0: <syscon> mem 0x1c00000-0x1c00fff on simplebus0
> random: harvesting attach, 8 bytes (4 bits) from syscon_generic0
> awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c3ffff irq 27 on simplebus0
> simplebus0: no default resources for rid = 1, type = 3
> awg0: PHY type: rgmii, conf mode: reg
> awg0: EMAC clock: 0x00000006
> awg0: AHB frequency 150000000 Hz, MDC div: 0x2
> miibus0: <MII bus> on awg0
> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
> rgephy0: OUI 0x00e04c, model 0x0011, rev. 5
> rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
> random: harvesting attach, 8 bytes (4 bits) from rgephy0
> rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
> rgephy1: OUI 0x00e04c, model 0x0011, rev. 5
> rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
> random: harvesting attach, 8 bytes (4 bits) from rgephy1
> random: harvesting attach, 8 bytes (4 bits) from miibus0
> awg0: bpf attached
> awg0: Ethernet address: 02:ba:b1:c5:93:b7
> random: harvesting attach, 8 bytes (4 bits) from awg0
> cryptosoft0: <software crypto>
> crypto: assign cryptosoft0 driver id 0, flags 0x6000000
> crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 34 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 35 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 36 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 37 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
> crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
> random: harvesting attach, 8 bytes (4 bits) from cryptosoft0
> Found SMCCC version 1.0
> Device configuration finished.
> procfs registered
> Timecounters tick every 1.000 msec
> vlan: initialized, using hash tables with chaining
> lo0: bpf attached
> arc4random: read 32 bytes from preloaded cache
> arc4random: read 32 bytes from preloaded cache
> arc4random: read 32 bytes from preloaded cache
> tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384
> IPsec: Initialized Security Association Processing.
> usbus0: 480Mbps High Speed USB v2.0
> usbus1: 12Mbps Full Speed USB v1.0
> aw_mmc0: Powering up sd/mmc
> mmc0: Probing bus
> ugen0.1: <Allwinner EHCI root HUB> at usbus0
> uhub0: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
> ugen1.1: <Generic OHCI root HUB> at usbus1
> uhub1: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> aw_mmc0: error rint: 0x00000100
> AW_MMC_INT_RESP_TIMEOUT
> aw_mmc0: error rint: 0x00000100
> AW_MMC_INT_RESP_TIMEOUT
> aw_mmc0: error rint: 0x00000100
> AW_MMC_INT_RESP_TIMEOUT
> aw_mmc0: error rint: 0x00000100
> AW_MMC_INT_RESP_TIMEOUT
> aw_mmc0: error rint: 0x00000100
> AW_MMC_INT_RESP_TIMEOUT
> aw_mmc0: error rint: 0x00000100
> AW_MMC_INT_RESP_TIMEOUT
> aw_mmc0: error rint: 0x00000100
> AW_MMC_INT_RESP_TIMEOUT
> aw_mmc0: error rint: 0x00000100
> AW_MMC_INT_RESP_TIMEOUT
> mmc0: SD probe: failed
> mmc0: MMC probe: OK (OCR: 0x40ff8080)
> mmc0: Current OCR: 0x00ff8080
> mmc0: Probing cards
> mmc0: New card detected (CID 150100444a4e423452079f43b2e7636f)
> mmc0: New card detected (CSD d02701320f5903fff6dbffef8e40400d)
> aw_mmc0: error rint: 0x00008010
> AW_MMC_INT_DATA_END_BIT_ERR
> mmc0: Card at relative address 0x0002 added:
> mmc0: card: MMCHC DJNB4R 0.7 SN <REPLACED> MFG 06/2016 by 21 0x0000
> mmc0: quirks: 0
> mmc0: bus: 4bit, 200MHz (HS200 timing)
> mmc0: memory: 244277248 blocks, erase sector 1024 blocks
> aw_mmc0: error rint: 0x00000100
> AW_MMC_INT_RESP_TIMEOUT
> aw_mmc0: error rint: 0x00000100
> AW_MMC_INT_RESP_TIMEOUT
> aw_mmc0: error rint: 0x00000100
> AW_MMC_INT_RESP_TIMEOUT
> aw_mmc0: error rint: 0x00000100
> AW_MMC_INT_RESP_TIMEOUT
> mmc0: setting transfer rate to 52.000MHz (dual data rate timing)
> mmc0: Failed to set VCCQ for card at relative address 2
So the driver is selecting DDR52 transfer rate but, of course,
cannot switch the IO voltage to 1.8V as on this board the IO voltage
for the SD card is tied to 3.3V
> uhub1: 1 port with 1 removable, self powered
> random: harvesting attach, 8 bytes (4 bits) from uhub1
> uhub0: 1 port with 1 removable, self powered
> random: harvesting attach, 8 bytes (4 bits) from uhub0
> aw_mmc0: controller timeout
> aw_mmc0: timeout updating clock
> aw_mmc0: controller timeout
> aw_mmc0: timeout updating clock
> aw_mmc0: controller timeout
> aw_mmc0: timeout updating clock
> aw_mmc0: controller timeout
> aw_mmc0: Spurious interrupt - no active request, rint: 0x00000000
>
> mmcsd0: Error reading EXT_CSD Timeout
This seems weird, I have a board with an eMMC IO voltage tied to 3.3V
(Olinuxino-A64), I'll try HEAD on this board.
> device_attach: mmcsd0 attach returned 6
> Release APs...done
> Trying to mount root from ufs:/dev/ufs/PINE64P2Grootfs [rw,noatime]...
> CPU 0: ARM Cortex-A53 r0p4mountroot: waiting for device /dev/ufs/PINE64P2Grootfs...
> affinity: 0
> Instruction Set Attributes 0 = <AES+PMULL,SHA1,SHA2,CRC32>
> Instruction Set Attributes 1 = <>
> Processor Features 0 = <AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
> Processor Features 1 = <0>
> Memory Model Features 0 = <4k Granule,64k Granule,MixedEndian,S/NS Mem,16bit ASID,1TB PA>
> Memory Model Features 1 = <>
> Memory Model Features 2 = <32b CCIDX,48b VA>
> Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 Breakpoints,PMUv3,Debug v8>
> Debug Features 1 = <0>
> Auxiliary Features 0 = <0>
> Auxiliary Features 1 = <0>
> CPU 1: ARM Cortex-A53 r0p4 affinity: 1
> CPU 2: ARM Cortex-A53 r0p4 affinity: 2
> CPU 3: ARM Cortex-A53 r0p4 affinity: 3
> regulator: shutting down vcc3v3
> Mounting from ufs:/dev/ufs/PINE64P2Grootfs failed with error 19.
>
> Loader variables:
> vfs.root.mountfrom=ufs:/dev/ufs/PINE64P2Grootfs
> vfs.root.mountfrom.options=rw,noatime
>
> Manual root filesystem specification:
> <fstype>:<device> [options]
> Mount <device> using filesystem <fstype>
> and with the specified (optional) option list.
>
> eg. ufs:/dev/da0s1a
> zfs:tank
> cd9660:/dev/cd0 ro
> (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
>
> ? List valid disk boot devices
> . Yield 1 second (for background tasks)
> <empty line> Abort manual input
>
> mountroot>
>
>
>
> ===
> Mark Millard
> marklmi at yahoo.com
> ( dsl-only.net went
> away in early 2018-Mar)
--
Emmanuel Vadot <manu at bidouilliste.com> <manu at freebsd.org>
More information about the freebsd-arm
mailing list