PINE64 - 12.0-CURRENT r320599 -> r324563 - USB VIA Labs no more detected

[Henri Hennebert]

On 10/23/2017 21:33, Mark Millard wrote:
> On 2017-Oct-23, at 5:57 AM, Henri Hennebert <hlh at restart.be> wrote:
> 
> 
>> I try 12.0-CURRENT -r324563 on pine64+ 2GB and the USB VIA Labs hub and its 2 disks is no more detected.
>>
>> Wen running r320599, boot msg:
>>
>> . . .
>>
>> When running r324563, boot msg:
>>
>> . . .
> 
> Are you using the lower usb port to attach your hub?
> I ask because. . .
> 
> The A64 support has been undergoing re-work by
> Emmanuel Vadot for some time.
> 
> I'm running -r324743 of head and with that the
> lower usb port works, complete with EHCI support,
> which I'm using. -r324563 is what enabled ECHI
> on this lower port. Before it had been OHCI-only
> since -r323641 (and not working for a time
> before that).
You are right, I was using the upper USB port. I will try the lower one.

Thanks for your information

> 
> But the note from -r323641 still applies to the
> top usb port in that a "musb" driver is needed
> in the new implementation and is still missing
> as I understand:
> 
> QUOTE:
> This (plus 323640) re-enable OHCI on Pine64 on the bottom USB port.
> The top USB port is routed to the OHCI0/EHCI0 which is by default in OTG mode.
> While the phy code can handle the re-route to standard OHCI/EHCI we still need
> a driver for musb to probe and configure it in host mode.
> :END QUOTE
> 
> 
> ===
> Mark Millard
> markmi at dsl-only.net
> 
>