PINE64+ Release APs, APs not started

Fri Jul 28 08:30:05 UTC 2017

On Fri, 28 Jul 2017 09:15:52 +0200
Henri Hennebert <hlh at restart.be> wrote:

> On 07/27/2017 18:34, Henri Hennebert wrote:
> > On 07/27/2017 17:02, Emmanuel Vadot wrote:
> >> On Thu, 27 Jul 2017 15:57:40 +0100
> >> Andrew Turner <andrew at fubar.geek.nz> wrote:
> >>
> >>>
> >>>> On 27 Jul 2017, at 15:43, Emmanuel Vadot <manu at bidouilliste.com> wrote:
> >>>>
> >>>> On Thu, 27 Jul 2017 14:31:18 +0200
> >>>> Henri Hennebert <hlh at restart.be <mailto:hlh at restart.be>> wrote:
> >>>>> I think that the DTB is wrong.
> >>>>>
> >>>>> Note that my kernel config have:
> >>>>>
> >>>>> options         FDT                     # Flattened Device Tree bus 
> >>>>> driver
> >>>>> options         FDT_DTB_STATIC          # Statically embed a DTB file
> >>>>> into a kernel image
> >>>>> makeoptions     FDT_DTS_FILE=pine64_plus.dts
> >>>>
> >>>> FDT_DTB_STATIC shouldn't be used unless you *exactly* know what you're
> >>>> doing. Please use GENERIC kernel on ARM64.
> > 
> > I will remove it from my kernel config.
> > 
> 
> I retry with your u-boot:
> 
> U-Boot SPL 2017.07-00011-g41b31da7ca-dirty (Jul 27 2017 - 07:37:57)
> DRAM: 2048 MiB
> Trying to boot from MMC1
> 
>  >> FreeBSD EFI boot block
>     Loader path: /boot/loader.efi
> 
>     Initializing modules: ZFS UFS
>     Probing 5 block devices.......* done
>      ZFS found no pools
>      UFS found 1 partition
> Consoles: EFI console
> Command line arguments: loader.efi
> Image base: 0xb6dbd008
> EFI version: 2.05
> EFI Firmware: Das U-boot (rev 0.00)
> 
> FreeBSD/arm64 EFI loader, Revision 1.1
> (Tue Jul 25 03:58:20 CEST 2017 root at norquay.restart.bel)
> EFI boot environment
> Loading /boot/defaults/loader.conf
> /boot/kernel/kernel text=0x71e548 data=0x9cc80+0x39e6a6 
> syms=[0x8+0xf6d80+0x8+0xeaf3b]
> /boot/entropy size=0x1000
> /boot/kernel/zfs.ko text=0x7a418 text=0xdc390 data=0x11528+0x9e970 
> syms=[0x8+0x1ddd8+0x8+0x18d38]
> /boot/kernel/opensolaris.ko text=0x1358 text=0xd90 data=0x10160+0x125d0 
> syms=[0x8+0x1020+0x8+0x8ca]
> 
> Hit [Enter] to boot immediately, or any other key for command prompt.
> Booting [/boot/kernel/kernel]...
> Using DTB provided by EFI at 0x48000000.
> KDB: debugger backends: ddb
> KDB: current backend: ddb
> Copyright (c) 1992-2017 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>          The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 12.0-CURRENT #0 r321371M: Thu Jul 27 19:52:17 CEST 2017
>      root at norquay.restart.bel:/usr/obj/usr/src/sys/NORQUAY arm64
> FreeBSD clang version 5.0.0 (trunk 308421) (based on LLVM 5.0.0svn)
> VT: init without driver.
> Starting CPU 1 (1)
> Starting CPU 2 (2)
> Starting CPU 3 (3)
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> random: unblocking device.
> random: entropy device external interface
> kbd0 at kbdmux0
> ofwbus0: <Open Firmware Device Tree>
> clk_fixed0: <Fixed clock> on ofwbus0
> clk_fixed1: <Fixed clock> on ofwbus0
> clk_fixed2: <Fixed clock> on ofwbus0
> simplebus0: <Flattened device tree simple bus> on ofwbus0
> aw_ccung0: <Allwinner Clock Control Unit NG> mem 0x1c20000-0x1c203ff on 
> simplebus0
> aw_ccung0: Cannot set parent to pll_ddr for dram
> regfix0: <Fixed Regulator> on ofwbus0
> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
> awusbphy0: <Allwinner USB PHY> mem 
> 0x1c19400-0x1c19413,0x1c1a800-0x1c1a803,0x1c1b800-0x1c1b803 on simplebus0
> gic0: <ARM Generic Interrupt Controller> mem 
> 0x1c81000-0x1c81fff,0x1c82000-0x1c83fff,0x1c84000-0x1c85fff,0x1c86000-0x1c87fff 
> irq 210
> gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 224
> gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq 
> 10,11,12 on simplebus0
> gpiobus0: <OFW GPIO bus> on gpio0
> gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq 24 
> on simplebus0
> gpiobus1: <OFW GPIO bus> on gpio1
> generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
> rtc0: <Allwinner RTC> mem 0x1f00000-0x1f00053 irq 22,23 on simplebus0
> rtc0: registered as a time-of-day clock, resolution 1.000000s
> cpulist0: <Open Firmware CPU Group> on ofwbus0
> cpu0: <Open Firmware CPU> on cpulist0
> cpu1: <Open Firmware CPU> on cpulist0
> cpu2: <Open Firmware CPU> on cpulist0
> cpu3: <Open Firmware CPU> on cpulist0
> a10_mmc0: <Allwinner Integrated MMC/SD controller> mem 
> 0x1c0f000-0x1c0ffff irq 4 on simplebus0
> mmc0: <MMC/SD bus> on a10_mmc0
> ohci0: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 9 on simplebus0
> usbus0 on ohci0
> gpioc0: <GPIO controller> on gpio0
> uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 13 on simplebus0
> uart0: console (115384,n,8,1)
> gpioc1: <GPIO controller> on gpio1
> awg0: <Allwinner Gigabit Ethernet> mem 
> 0x1c30000-0x1c31fff,0x1c00030-0x1c00033 irq 25 on simplebus0
> miibus0: <MII bus> on awg0
> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
> rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, w
> rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
> rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, w
> awg0: Ethernet address: 02:ba:cf:46:d5:39
> cryptosoft0: <software crypto>
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> Timecounters tick every 1.000 msec
> usbus0: 12Mbps Full Speed USB v1.0
> ugen0.1: <Generic OHCI root HUB> at usbus0
> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> device_attach: uhub0 attach returned 6
> usbus0: Root HUB problem, error=USB_ERR_NO_ROOT_HUB
> mmcsd0: 16GB <SDHC SL16G 8.0 SN A9A41D45 MFG 03/2017 by 3 SD> at mmc0 
> 50.0MHz/4bit/65535-block
> Release APs
> APs not started
> CPU  0: ARM Cortex-A53 r0p4 affinity:  0
>   Instruction Set Attributes 0 = <AES+PMULL,SHA1,SHA2,CRC32>
>   Instruction Set Attributes 1 = <0>
>           Processor Features 0 = <AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
>           Processor Features 1 = <0>
>        Memory Model Features 0 = <4k Granule,64k 
> Granule,MixedEndian,S/NS Mem,16bit ASID,1TB PA>
>        Memory Model Features 1 = <>
>               Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 
> Breakpoints,PMUv3,Debug v8>
>               Debug Features 1 = <0>
>           Auxiliary Features 0 = <0>
>           Auxiliary Features 1 = <0>
> CPU  1: (null) (null) r0p0 affinity:  0
> CPU  2: (null) (null) r0p0 affinity:  0
> CPU  3: (null) (null) r0p0 affinity:  0
>    x0: ffff000000967f00
>    x1: fffffd0ø
> 
> But the Release APs don't work.
> 
> I retry with the old u-boot and the Release APs don't work either.
> 
> With your u-boot and r320599 (with the embeded DTB) I get the same 
> strange boot as before (no aw_ccung). So the embeded DTB is the culprit.
> 
> Henri

 Can you please try using the latest source and use GENERIC and
GENERIC-NODEBUG just to see if we do see the same problem please ?

 My overdrive 1000 is currently building world up to the latest source
so I can see if -NODEBUG work on it or not.

-- 
Emmanuel Vadot <manu at bidouilliste.com> <manu at freebsd.org>