RPi3 doesn't boot r320947
Michael Tuexen
tuexen at freebsd.org
Thu Jul 13 20:21:04 UTC 2017
> On 13. Jul 2017, at 21:41, Michael Tuexen <tuexen at freebsd.org> wrote:
>
> Dear all,
>
> I installed
> https://download.freebsd.org/ftp/snapshots/arm64/aarch64/ISO-IMAGES/12.0/FreeBSD-12.0-CURRENT-arm64-aarch64-RPI3-20170710-r320869.img.xz
> on an SD card without any problems, built several packages and finally compiled a GENERIC-NODEBUG
> head kernel of today on the RPi3.
>
> After installing it, it doesn't boot.
Some more information:
1. When powering up the RPi3, typing nothing at the console,
it doesn't boot. See my description.
2. When powering up, typing ? followed by typing boot-conf,
it boots fine.
Best regards
Michael
>
> On the serial console I get:
>
> Using DTB provided by EFI at 0x8004000.
> KDB: debugger backends: ddb
> KDB: current backend: ddb
> Copyright (c) 1992-2017 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 12.0-CURRENT #0 r320947: Thu Jul 13 18:35:01 CEST 2017
> tuexen at generic:/home/tuexen/head/sys/arm64/compile/GENERIC-NODEBUG arm64
> FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
> VT: init without driver.
> Starting CPU 1 (1)
> Starting CPU 2 (2)
> Starting CPU 3 (3)
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> random: unblocking device.
> random: entropy device external interface
> kbd0 at kbdmux0
> ofwbus0: <Open Firmware Device Tree>
> simplebus0: <Flattened device tree simple bus> on ofwbus0
> ofw_clkbus0: <OFW clocks bus> on ofwbus0
> clk_fixed0: <Fixed clock> on ofw_clkbus0
> clk_fixed1: <Fixed clock> on ofw_clkbus0
> regfix0: <Fixed Regulator> on ofwbus0
> regfix1: <Fixed Regulator> on ofwbus0
> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
> local_intc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0
> intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 16 on simplebus0
> generic_timer0: <ARMv7 Generic Timer> irq 47,48,49,50 on simplebus0
> Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
> Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
> bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 on simplebus0
> bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100027 on simplebus0
> mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 17 on simplebus0
> gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 18,19 on simplebus0
> gpiobus0: <OFW GPIO bus> on gpio0
> gpioc0: <GPIO controller> on gpio0
> uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e201fff irq 20 on simplebus0
> uart0: console (115200,n,8,1)
> spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e204fff irq 21 on simplebus0
> spibus0: <OFW SPI bus> on spi0
> spibus0: <unknown card> at cs 0 mode 0
> spibus0: <unknown card> at cs 1 mode 0
> iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 32 on simplebus0
> iicbus0: <OFW I2C bus> on iichb0
> iic0: <I2C generic I/O> on iicbus0
> bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 38,39 on simplebus0
> usbus0 on bcm283x_dwcotg0
> sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 42 on simplebus0
> mmc0: <MMC/SD bus> on sdhci_bcm0
> fb0: <BCM2835 VT framebuffer driver> on simplebus0
> fbd0 on fb0
> VT: initialize with new VT driver "fb".
> fb0: 656x416(656x416 at 0,0) 24bpp
> fb0: fbswap: 1, pitch 1968, base 0x3db33000, screen_size 818688
> pmu0: <Performance Monitoring Unit> irq 46 on simplebus0
> gpioled0: <GPIO LEDs> on ofwbus0
> gpioled0: <led0> failed to map pin
> gpioled0: <led1> failed to map pin
> cpulist0: <Open Firmware CPU Group> on ofwbus0
> cpu0: <Open Firmware CPU> on cpulist0
> cpu1: <Open Firmware CPU> on cpulist0
> cpu2: <Open Firmware CPU> on cpulist0
> cpu3: <Open Firmware CPU> on cpulist0
> cryptosoft0: <software crypto>
> Timecounters tick every 1.000 msec
> usbus0: 480Mbps High Speed USB v2.0
> ugen0.1: <DWCOTG OTG Root HUB> at usbus0
> uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
> mmcsd0: 64GB <SDHC SC64G 8.0 SN ECB540FD MFG 11/2016 by 3 SD> at mmc0 41.6MHz/4bit/65535-block
> Release APs
> APs not started
> x0: ffff000000a1bb80
> x1: fffffd0[ thread pid 0 tid 100064 ]
> Stopped at kdb_enter+0x40: undefined d4200000
> db> bt
> Tracing pid 0 tid 100064 td 0xfffffd0001532a80
> db_trace_self() at db_stack_trace+0xec
> pc = 0xffff000000613920 lr = 0xffff0000000852c0
> sp = 0xffff0000531c6310 fp = 0xffff0000531c6340
>
> db_stack_trace() at db_command+0x224
> pc = 0xffff0000000852c0 lr = 0xffff000000084f44
> sp = 0xffff0000531c6350 fp = 0xffff0000531c6430
>
> db_command() at db_command_loop+0x60
> pc = 0xffff000000084f44 lr = 0xffff000000084d04
> sp = 0xffff0000531c6440 fp = 0xffff0000531c6460
>
> db_command_loop() at db_trap+0xf4
> pc = 0xffff000000084d04 lr = 0xffff000000087dec
> sp = 0xffff0000531c6470 fp = 0xffff0000531c6690
>
> db_trap() at kdb_trap+0x180
> pc = 0xffff000000087dec lr = 0xffff0000003687fc
> sp = 0xffff0000531c66a0 fp = 0xffff0000531c6700
>
> kdb_trap() at handle_el1h_sync+0x74
> pc = 0xffff0000003687fc lr = 0xffff000000615874
> sp = 0xffff0000531c6710 fp = 0xffff0000531c6820
>
> handle_el1h_sync() at kdb_enter+0x34
> pc = 0xffff000000615874 lr = 0xffff000000367f38
> sp = 0xffff0000531c6830 fp = 0xffff0000531c68c0
>
> kdb_enter() at vpanic+0x1a0
> pc = 0xffff000000367f38 lr = 0xffff0000003261f8
> sp = 0xffff0000531c68d0 fp = 0xffff0000531c6950
>
> vpanic() at panic+0x48
> pc = 0xffff0000003261f8 lr = 0xffff000000326054
> sp = 0xffff0000531c6960 fp = 0xffff0000531c69e0
>
> panic() at data_abort+0x21c
> pc = 0xffff000000326054 lr = 0xffff000000629d10
> sp = 0xffff0000531c69f0 fp = 0xffff0000531c6aa0
>
> data_abort() at handle_el1h_sync+0x74
> pc = 0xffff000000629d10 lr = 0xffff000000615874
> sp = 0xffff0000531c6ab0 fp = 0xffff0000531c6bc0
>
> handle_el1h_sync() at thread_lock_flags_+0x1a8
> pc = 0xffff000000615874 lr = 0xffff0000003086c8
> sp = 0xffff0000531c6bd0 fp = 0xffff0000531c6cc0
>
> thread_lock_flags_() at statclock_cnt+0x11c
> pc = 0xffff0000003086c8 lr = 0xffff0000002c49e0
> sp = 0xffff0000531c6cd0 fp = 0xffff0000531c6cf0
>
> statclock_cnt() at handleevents+0x108
> pc = 0xffff0000002c49e0 lr = 0xffff00000064b08c
> sp = 0xffff0000531c6d00 fp = 0xffff0000531c6d40
>
> handleevents() at timercb+0xe0
> pc = 0xffff00000064b08c lr = 0xffff00000064b828
> sp = 0xffff0000531c6d50 fp = 0xffff0000531c6dc0
>
> timercb() at arm_tmr_intr+0x5c
> pc = 0xffff00000064b828 lr = 0xffff000000601708
> sp = 0xffff0000531c6dd0 fp = 0xffff0000531c6dd0
>
> arm_tmr_intr() at intr_event_handle+0x64
> pc = 0xffff000000601708 lr = 0xffff0000002ed200
> sp = 0xffff0000531c6de0 fp = 0xffff0000531c6e10
>
> intr_event_handle() at intr_isrc_dispatch+0x50
> pc = 0xffff0000002ed200 lr = 0xffff00000064dbfc
> sp = 0xffff0000531c6e20 fp = 0xffff0000531c6e30
>
> intr_isrc_dispatch() at bcm_lintc_intr+0x190
> pc = 0xffff00000064dbfc lr = 0xffff00000061097c
> sp = 0xffff0000531c6e40 fp = 0xffff0000531c6ec0
>
> bcm_lintc_intr() at intr_irq_handler+0x60
> pc = 0xffff00000061097c lr = 0xffff00000064d9c8
> sp = 0xffff0000531c6ed0 fp = 0xffff0000531c6ef0
>
> intr_irq_handler() at handle_el1h_irq+0x70
> pc = 0xffff00000064d9c8 lr = 0xffff000000615930
> sp = 0xffff0000531c6f00 fp = 0xffff0000531c7010
>
> handle_el1h_irq() at uart_pl011_putc+0x34
> pc = 0xffff000000615930 lr = 0xffff00000019dd3c
> sp = 0xffff0000531c7020 fp = 0xffff0000531c70c0
>
> uart_pl011_putc() at uart_cnputc+0x94
> pc = 0xffff00000019dd3c lr = 0xffff00000019f0c4
> sp = 0xffff0000531c70d0 fp = 0xffff0000531c7100
>
> uart_cnputc() at cnputc+0x78
> pc = 0xffff00000019f0c4 lr = 0xffff0000002ca264
> sp = 0xffff0000531c7110 fp = 0xffff0000531c7140
>
> cnputc() at cnputs+0xb4
> pc = 0xffff0000002ca264 lr = 0xffff0000002ca528
> sp = 0xffff0000531c7150 fp = 0xffff0000531c7170
>
> cnputs() at putchar+0x158
> pc = 0xffff0000002ca528 lr = 0xffff00000036e1f0
> sp = 0xffff0000531c7180 fp = 0xffff0000531c7200
>
> putchar() at kvprintf+0xc54
> pc = 0xffff00000036e1f0 lr = 0xffff00000036de30
> sp = 0xffff0000531c7210 fp = 0xffff0000531c7310
>
> kvprintf() at _vprintf+0x7c
> pc = 0xffff00000036de30 lr = 0xffff00000036e7a8
> sp = 0xffff0000531c7320 fp = 0xffff0000531c7420
>
> _vprintf() at printf+0x60
> pc = 0xffff00000036e7a8 lr = 0xffff00000036e9c4
> sp = 0xffff0000531c7430 fp = 0xffff0000531c74d0
>
> printf() at print_registers+0x4c
> pc = 0xffff00000036e9c4 lr = 0xffff000000629a94
> sp = 0xffff0000531c74e0 fp = 0xffff0000531c7510
>
> print_registers() at data_abort+0x1f0
> pc = 0xffff000000629a94 lr = 0xffff000000629ce4
> sp = 0xffff0000531c7520 fp = 0xffff0000531c75d0
>
> data_abort() at handle_el1h_sync+0x74
> pc = 0xffff000000629ce4 lr = 0xffff000000615874
> sp = 0xffff0000531c75e0 fp = 0xffff0000531c76f0
>
> handle_el1h_sync() at tdq_notify+0x28
> pc = 0xffff000000615874 lr = 0xffff000000352b04
> sp = 0xffff0000531c7700 fp = 0xffff0000531c77a0
>
> tdq_notify() at sched_switch+0x520
> pc = 0xffff000000352b04 lr = 0xffff000000350cdc
> sp = 0xffff0000531c77b0 fp = 0xffff0000531c7800
>
> sched_switch() at mi_switch+0x118
> pc = 0xffff000000350cdc lr = 0xffff000000330220
> sp = 0xffff0000531c7810 fp = 0xffff0000531c7830
>
> mi_switch() at taskqgroup_binder+0x74
> pc = 0xffff000000330220 lr = 0xffff000000366d60
> sp = 0xffff0000531c7840 fp = 0xffff0000531c7860
>
> taskqgroup_binder() at gtaskqueue_run_locked+0x154
> pc = 0xffff000000366d60 lr = 0xffff000000366c08
> sp = 0xffff0000531c7870 fp = 0xffff0000531c78e0
>
> gtaskqueue_run_locked() at gtaskqueue_thread_loop+0xcc
> pc = 0xffff000000366c08 lr = 0xffff0000003667cc
> sp = 0xffff0000531c78f0 fp = 0xffff0000531c7910
>
> gtaskqueue_thread_loop() at fork_exit+0x94
> pc = 0xffff0000003667cc lr = 0xffff0000002ea004
> sp = 0xffff0000531c7920 fp = 0xffff0000531c7950
>
> fork_exit() at fork_trampoline+0x10
> pc = 0xffff0000002ea004 lr = 0xffff000000629784
> sp = 0xffff0000531c7960 fp = 0x0000000000000000
>
> db>
>
> Any idea what the problem might be?
>
> Best regards
> Michael
>
>
> _______________________________________________
> freebsd-arm at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
More information about the freebsd-arm
mailing list