Is there a SoftIron Overdrive 1000 expert in the house?
Emmanuel Vadot
manu at bidouilliste.com
Thu Dec 21 14:54:14 UTC 2017
On Thu, 21 Dec 2017 01:12:16 -0600
Jon Brawn <jon at brawn.org> wrote:
> Wotcha!
>
> I?ve managed to upset my Overdrive 1000 by trying to upgrade it to 12.0-CURRENT, r326820.
>
> It used to boot from the internal hard drive with an older version of 12.0. Now it is unhappy; it now starts up,
>
> prints the early info,
>
> prints the bit about pressing ESCAPE for boot options, then drops into the UEFI Interactive shell stuff:
>
> UEFI Interactive Shell v2.1
> EDK II
> UEFI v2.60 (SoftIron Overdrive 1000, 0x00010000)
> Mapping table
> FS0: Alias(s):HD0b65535a1:;BLK1:
> PciRoot(0x1)/Pci(0x0,0x0)/Sata(0x1,0xFFFF,0x0)/HD(1,GPT,07AA3FF3-E61A-11E7-A2B0-E0FFF70020A6,0x28,0x64000)
> BLK0: Alias(s):
> PciRoot(0x1)/Pci(0x0,0x0)/Sata(0x1,0xFFFF,0x0)
> BLK2: Alias(s):
> PciRoot(0x1)/Pci(0x0,0x0)/Sata(0x1,0xFFFF,0x0)/HD(2,GPT,07AAD8D0-E61A-11E7-A2B0-E0FFF70020A6,0x64028,0x73F9BFF8)
> BLK3: Alias(s):
> PciRoot(0x1)/Pci(0x0,0x0)/Sata(0x1,0xFFFF,0x0)/HD(3,GPT,07AC2C1B-E61A-11E7-A2B0-E0FFF70020A6,0x74000020,0x706D67)
> Press ESC in 1 seconds to skip startup.nsh or any other key to continue.
> Shell>
>
> Any ideas about what I do to get it to look for the kernel in /dev/ada0p2, in /boot/? ?
>
> I?m new to UEFI, having never used it before.
>
> Thanks for any help y?all can offer.
>
> Jon.
What happens when you directly select the drive in the firmware ?
--
Emmanuel Vadot <manu at bidouilliste.com> <manu at freebsd.org>
More information about the freebsd-arm
mailing list