Orange pi one plug network cable after booted ,network will not active

[Emmanuel Vadot]

On Fri, 15 Dec 2017 16:41:56 +0800
?? <unto.foru13 at gmail.com> wrote:

> Dear all,
> 
> I think ,this  maybe is  the problem of u-boot.dtb??
> 
> scenario1:plug network cable first then power on,kernel had loaded.
> network will work well.
> even if I plug off cable then plug on again .network work well too.
> 
> scenario2:network cable not plug till kernel had loaded and  prompt login
> message.
> 
> booting message=>awg0:soft reset timed out
> 
> then I plug network cable ,network will not work.
> ifconfig will not show awg0.
> /etc/netstart will show => ifconfig: interface awg0 does not exist
> 
> blow is my u-boot source
> https://github.com/evadot/u-boot/tree/freebsd
> 
> export CROSS_COMPILE=arm-none-eabi-
> gmake orangepi_one_defconfig
> gmake menuconfig
>      vi .config
>      CONFIG_API=y
> gmake
> 
> how could I fixed this problem ??
> thanks all.

 I'll look into it but note that emac (if_awg) isn't in the dts for now
and only will be when we pull the Liunx 4.15 dts (early january).

-- 
Emmanuel Vadot <manu at bidouilliste.com> <manu at freebsd.org>