boot.ini file for Odroid-C1 on FreeBSD wiki page

[Boris Samorodov]

15.08.2017 12:57, Yoshiro MIHIRA пишет:
> Hi.
> 
> Currently I could not test something with ODROID-C1(because I use it as my
> parent's home VPN router).
> 
> 1. add boot.ini and fix gpart block size
> 
> I updated wiki page
> https://wiki.freebsd.org/action/diff/FreeBSD/arm/Odroid-C1?action=diff&rev1=9&rev2=10

Great, thanks!

> 2. growfs
> 
> I think growfs command is for freebsd partition(mmcsd0s2). So growfs
> /dev/mmcsd0s2?

Ah, yes, sure.

> 3. serial console is need to boot or not?

That was just a quesion. I wanted to get a headless machine but
didn't manage to boot Ocdoid-C1 without serial console.

> Next September I will try to boot ODROID-C1 without serial console cable,
> if I have a time.

That would be interesting.

Thank you.

> 2017年8月7日(月) 6:19 Boris Samorodov <bsam at passap.ru>:

>> 04.08.2017 09:15, Yoshiro MIHIRA пишет:
>>
>>> I will add boot.ini information to FreeBSD wiki page(1), if no one reply
>> my
>>> email until  10/Aug.
>>
>> That will be great.
>>
>> I have some more questions/fixes to "Steps to prepare SD card".
>>
>> 1. There are two commands:
>> ---
>> gpart add -t fat16 -b 1134 -s 64M mmcsd0
>> gpart add -t freebsd -b 132174 mmcsd0
>> ---
>>
>> I doubt the second command is precise. 64M is 131072 blocks,
>> 131072 + 1134 = 132206.
>>
>> If I use those commands I get the error after the second one:
>> ---
>> gpart: autofill: No space left on device
>> ---
>>
>> The value 132206 has a success. So the second command should be:
>> ---
>> gpart add -t freebsd -b 132206 mmcsd0
>> ---
>>
>> 2. Since we prepare the final disk, I'd add a growfs command at the
>> end of those steps:
>> ---
>> growfs /dev/mmcsd0
>> ---
>>
>> HTH & WBR
>> --
>> bsam
>> _______________________________________________
>> freebsd-arm at freebsd.org mailing list
>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
>