beaglebone black: MMC partition switch failed

[Glen Barber]

On Tue, Apr 18, 2017 at 08:42:58AM -0700, jungle Boogie wrote:
> On 15 April 2017 at 18:50, jungle boogie <jungleboogie0 at gmail.com> wrote:
> > Hi All,
> >
> > It's been awhile since I've been able to run FreeBSD on my BBB. It was
> > failing somewhere, but I didn't have good serial cable to see what was
> > happening.
> >
> > Using the latest freebsd head image:
> > FreeBSD-12.0-CURRENT-arm-armv6-BEAGLEBONE-20170413-r316750.img
> >
> > I'm writing it to my microSD card:
> > sudo dd if=FreeBSD-12.0-CURRENT-arm-armv6-BEAGLEBONE-20170413-r316750.img
> > of=/dev/sdf bs=8M
> > 128+0 records in
> > 128+0 records out
> > 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 1.01005 s, 1.1 GB/s
> >
> >
> > Putting it in the BB and holding s2 for three seconds as mentioned in the
> > FBSD Journal article[0].
> >
> > Upon doing so, I see this:
> > U-Boot SPL 2017.01-rc3 (Apr 13 2017 - 12:30:59)
> > Trying to boot from MMC1** First descriptor is NOT a primary desc on 0:1 **
> > MMC partition switch failed
> > *** Warning - MMC partition switch failed, using default environment
> >
> > ** Partition 1 not valid on device 0 **
> > spl_register_fat_device: fat register err - -1
> > spl_load_image_fat: error reading image u-boot.img, err - -1
> > MMC partition switch failed
> > *** Warning - MMC partition switch failed, using default environment
> >
> > spl: no partition table found
> > SPL: failed to boot from all boot devices
> > ### ERROR ### Please RESET the board ###
> >
> 
> 
> Anyone have recommendations on how to fix this?

There appears to be an issue with the 20170413 image.  Please check if
the FreeBSD-12.0-CURRENT-arm-armv6-BEAGLEBONE-20170405-r316508.img.xz
image works.

Glen

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.freebsd.org/pipermail/freebsd-arm/attachments/20170418/543a5b07/attachment.sig>