upgrading arm6hf

[bob prohaska]

On RPI2
 
make installworld TARGET_ARCH=armv6

was sufficient.

The only visible glitch on reboot was

(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 03 c9 6b a8 00 00 28 00 
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Retrying command

but that seems unrelated. Boot was otherwise normal.

bob prohaska

On Wed, May 18, 2016 at 12:24:21PM -1000, David Cornejo wrote:
> I am trying that now, I'll report back when it finishes
> 
> thanks!
> 
> On Wed, May 18, 2016 at 12:12 PM, Warner Losh <imp at bsdimp.com> wrote:
> > I believe, but I haven't tested, that all that should be required is
> > an installworld / installkernel.
> > You'll need to build with TARGET_ARCH=armv6 and may need to say DESTDIR=/ to get
> > around the cross-threading safety checks.
> >
> > Warner
> >
> > On Wed, May 18, 2016 at 1:40 PM, David Cornejo <dave at dogwood.com> wrote:
> >> Hi,
> >>
> >> What needs to be done to convert an arm6hf system to the new
> >> hard-float arm6? can it be done?
> >>
> >> dave c
> >> _______________________________________________
> >> freebsd-arm at freebsd.org mailing list
> >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> >> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
> _______________________________________________
> freebsd-arm at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"