'urtwn' & 'urtwnfw' Devices Unknown in r302145

[Otacílio]

Em 26/06/2016 20:51, Thomas Laus escreveu:
> Otaclio [otacilio.neto at bsd.com.br] wrote:
>> I don't understand the problem that you are facing. I was running the ALPHA4
>> and now ALPHA5 and I do not have problems to detect my urtwn devices. All
>> need is plug it into my notebook. I have tested using amd64 and beaglebone
>> black and both detects the device and it works.
>>
>> ugen0.2: <vendor 0x0bda> at usbus0
>> urtwn0: <vendor 0x0bda product 0x8178, class 0/0, rev 2.00/2.00, addr 1> on
>> usbus0
>> urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R
>> urtwn0: enabling 11n
>> [ota at nostromo /usr/home/ota]$ uname -a
>> FreeBSD nostromo 11.0-ALPHA5 FreeBSD 11.0-ALPHA5 #1 r302205: Sun Jun 26
>> 05:33:10 BRT 2016 ota at squitch:/usr/obj/usr/src/sys/GENERIC-NODEBUG  amd64
>>
>> _______________________________________________
>>
> Otaclio:
>
> I don't know the reason either and that is why I am asking for
> suggestions on how to identify and resolve my issues.  I captured some
> console messages that may provide additional insight.
>
> With Belkin USB Device
>
> Jun 26 19:09:02 fbsd11 kernel: ugen0.2: <vendor 0x0bda> at usbus0
> Jun 26 19:09:02 fbsd11 kernel: urtwn0: <vendor 0x0bda product 0x8191, class 0/0, rev 2.00/2.00, addr 1> on usbus0
> Jun 26 19:09:02 fbsd11 kernel: urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
> Jun 26 19:09:02 fbsd11 kernel: urtwn0: enabling 11n
>
> With Edimax N150N Device
>
> Jun 26 19:10:01 fbsd11 kernel: ugen0.2: <vendor 0x7392> at usbus0
> Jun 26 19:10:01 fbsd11 kernel: urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 2> on usbus0
> Jun 26 19:10:01 fbsd11 kernel: urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
>
> Ifconfig messages after either urtwn insertion.
>
> re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> 	options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
> 	ether 30:5a:3a:07:fa:54
> 	inet 192.168.1.105 netmask 0xffffff00 broadcast 192.168.1.255
> 	media: Ethernet autoselect (100baseTX <full-duplex>)
> 	status: active
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
> 	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
> 	inet 127.0.0.1 netmask 0xff000000
> 	groups: lo
>
> FBSD11 >ifconfig urtwn0 up
> ifconfig: interface urtwn0 does not exist
>
> FBSD11 >uname -a
> FreeBSD fbsd11 11.0-ALPHA5 FreeBSD 11.0-ALPHA5 #0 r302200M: Sun Jun 26 10:54:44 EDT 2016 lausts at fbsd11:/usr/obj/usr/src/sys/GENERIC-NODEBUG amd64
>
> It looks like the device gets identified, but the kernel module just
> doesn't like something with either Realtek urtwn network hardware.  I
> have a spare hard disk and will load a fresh snapshot of FreeBSD 11.0
> tomorrow and I'll report to the list if anything is different.  I
> receive the same results with either my 'amd64' and BeagleBone Black
> computers.  Both of my urtwn network interfaces are detected and
> usable on another computer that is running FreeBSD 10.3 Release-P5.
>
> Tom
>
>
Are you running a "normal" ALPHA5 version or did you some changes to it?


[]s

-Otacilio