loading 'VIRT' kernel in qemu

[Oleksandr Tymoshenko]

> On Dec 27, 2016, at 1:48 PM, Jason Harmening <jason.harmening at gmail.com> wrote:
> 
> Hi everyone,
> 
> I'm making some tweaks to the armv6 pmap to mirror some recent i386
> changes.  I don't have arm hardware readily available, so I thought I'd
> give qemu a whirl instead of asking other people to test my changes for
> me.  Since I need SMP but don't need any specific peripheral hw, the 'VIRT'
> kernel seems like my best bet.
> 
> I've successfully booted mips[64] under qemu, so naively starting out w/
> the same steps I use for mips:
> 
> 1). build armv6 world and VIRT kernel, install world to temp directory
> 2). use makefs(8) to build a 4GB (little endian) fs image from temp dir
> 3). Run qemu:
> qemu-system-arm -M virt -kernel <VIRT kernel binary> -hda <fs image>
> -nographic -m 1024
> 
> ...fails immediately:
> qemu: fatal: Trying to execute code outside RAM or ROM at 0xc1000100
> 
> R00=00000000 R01=00000000 R02=00000000 R03=00000000
> R04=00000000 R05=00000000 R06=00000000 R07=00000000
> R08=00000000 R09=00000000 R10=00000000 R11=00000000
> R12=00000000 R13=00000000 R14=00000000 R15=c1000100
> 
> hmm, looks pretty close to KERNVIRTADDR.
> 
> Most online docs for qemu-system-arm seem to assume a prebuilt linux kernel
> and initrd, the rest are...fragmented-to-nonexistent.  I've seen a few
> hints that I might need to wrap the kernel image up along w/ u-boot, but
> the u-boot images seem to be very SoC-specific.
> 
> Any help would be much appreciated, sorry for the n00b question.

Hi Jason,

It looks like for VIRT kernel is supposed to be used with UEFI. At least
this part of NanoBSD sources hints at it:
http://sources.freebsd.org/HEAD/src/tools/tools/nanobsd/embedded/qemu-armv7.cfg <http://sources.freebsd.org/HEAD/src/tools/tools/nanobsd/embedded/qemu-armv7.cfg>
You can probably use NanoBSD-generated image for your experiments

VERSATILEPB kernel used to work with QEMU but I’ve just tried to boot
it and it doesn’t seem to work. Will need some time to track down what’s wrong
with it. VERSATILEPB kernel needs a wrapper to make it act as a ROM
image. Wrapper and command to run it you can find here:
https://github.com/freebsd/crochet/blob/master/board/VersatilePB/setup.sh <https://github.com/freebsd/crochet/blob/master/board/VersatilePB/setup.sh>