Allwinner H3 - OrangePi Plus Status
Daniel Braniss
danny at cs.huji.ac.il
Wed Aug 10 08:26:32 UTC 2016
> On 10 Aug 2016, at 11:21, Mattia Rossi <mattia.rossi.mailinglists at gmail.com> wrote:
>
> Hi all again,
>
> I've managed to build everything, and to create the image etc., but I'm having troubble with the .dtb file
>>
>> the .dtb file goes in /boot/dtb
>> Also realised that my attachments did not go through, in case their air needed
>> let me know.
>>
>>
>
> So, I've added sun8i-h3-orangepi-plus.dts to the dtb/allwinner Makefile, so that it gets built with the MODULES_EXTRAS option in the kernel config file.
>
> So far so good, the .dtb exists as sun8i-h3-orangepi-plus.dtb and is installed in /boot/dtb which is placed on the ufs filesystem (2nd partition of the SD card).
>
> When I switch on the device, u-boot and ubldr start fine, but ubldr complains about the missing .dtb - So obviously it's confused by something. I guess the .dtb is either in the wrong place or it has the worng name. In either way, I need to tell ubldr what to look for. How do I do that?
>
> On my dreamplug I don't use ubldr, but boot kernel.bin directly from u-boot. There I use the following kernel config options:
>
> options FDT_DTB_STATIC
> makeoptions FDT_DTS_FILE=dreamplug-1001.dts
>
> which cause the .dtb to be built into the kernel. Would that work with ubldr as well? (I don't need a separate .dtb, so whatever works is fine with me..
>
> Do you have any hints?
>
you will have to either
compile u-boot for the orange-plus so that it will look for the correct dab file
depending which one you are using, it’s probably looking for orange-pc
(do a grep dtb of the u-boot - which should be in the fat partition)
or
figure out how to set/create the txt file u-boot is supposed to read, and what is the correct
magic syntax to set the dub file name
> Thanks,
>
> Mat
More information about the freebsd-arm
mailing list