wifi interface missing in 11.0 r290273 Hummingboard

[Vladimir Botka]

Hello,

would it be possible to help me figure out why I'm missing the "run"
interface in 11.0-CURRENT arm r290273 [1] with RT5592 adapter?

I can see the interface run0 in 10.2 i386 [4-6], but run0 in missing in
11.0 arm [1-3]. The same behavior can be observed with RT5390.

Cheers,
Vladimir

[1]
# uname -a
FreeBSD imx6 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r290273: Tue Nov  3
02:54:03 UTC 2015
root at releng2.nyi.freebsd.org:/usr/obj/arm.armv6/usr/src/sys/IMX6  arm

[2]
Nov  9 12:41:12 imx6 kernel: ugen1.3: <Ralink> at usbus1 (disconnected)
Nov  9 12:41:13 imx6 kernel: run0: at uhub2, port 1, addr 3
(disconnected) 
Nov  9 12:41:20 imx6 kernel: ugen1.3: <Ralink> at usbus1
Nov  9 12:41:21 imx6 kernel: run0: <1.0> on usbus1
Nov  9 12:41:21 imx6 kernel: run0: MAC/BBP RT5592 (rev 0x0222), RF
RT5592 (MIMO 2T2R), address 64:70:02:27:d6:42

[3]
# ifconfig -a
ffec0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500 options=80008<VLAN_MTU,LINKSTATE>
	ether d0:63:00:00:00:00
	inet 192.168.1.40 netmask 0xffffff00 broadcast 192.168.1.255 
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
	inet 127.0.0.1 netmask 0xff000000 
	groups: lo 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

[4]
# uname -a
FreeBSD vlado-srv 10.2-RELEASE FreeBSD 10.2-RELEASE #0 r286666: Wed Aug
12 19:31:38 UTC 2015
root at releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC  i386

[5]
Nov  9 13:39:48 vlado-srv kernel: ugen1.3: <Ralink> at usbus1
Nov  9 13:39:48 vlado-srv kernel: run0: <1.0> on usbus1
Nov  9 13:39:48 vlado-srv kernel: run0: MAC/BBP RT5592 (rev 0x0222), RF
RT5592 (MIMO 2T2R), address 64:70:02:27:d6:42 
Nov  9 13:39:48 vlado-srv devd: Executing '/etc/pccard_ether run0
start' 
Nov  9 13:39:48 vlado-srv devd: Executing '/etc/pccard_ether run0
start' 
Nov  9 13:39:56 vlado-srv kernel: run0: firmware RT3071 ver. 0.33 loaded

[6]
# ifconfig run0
run0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
	ether 64:70:02:27:d6:42
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
	media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
	status: no carrier
--
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
URL: <http://lists.freebsd.org/pipermail/freebsd-arm/attachments/20151109/b5938db4/attachment.bin>