[Bug 197760] SMP support bug on ARMADA XP MV78460

[bugzilla-noreply at freebsd.org]

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=197760

            Bug ID: 197760
           Summary: SMP support bug on ARMADA XP MV78460
           Product: Base System
           Version: 11.0-CURRENT
          Hardware: arm
                OS: Any
            Status: New
          Severity: Affects Some People
          Priority: ---
         Component: arm
          Assignee: freebsd-arm at FreeBSD.org
          Reporter: callthethunder at gmail.com

Created attachment 153106
  --> https://bugs.freebsd.org/bugzilla/attachment.cgi?id=153106&action=edit
device tree used

Non-boot CPUs not started on ARMADA XP MV78460:

We see the following in dmesg:

WARNING: Some AP's failed to start
Release APs
AP's not started

sysctl hw.ncpus = 4 (all 4 cores are detected).

Board: RD-AXP-GP rev 1.0
SoC:   MV78460 B0
       running 4 CPUs
       Custom configuration
CPU:   Marvell PJ4B (584) v7 (Rev 2) LE
       CPU 0
       CPU    @ 1333 [MHz]
       L2     @ 667 [MHz]
       TClock @ 250 [MHz]
       DDR    @ 667 [MHz]
       DDR 64Bit Width, FastPath Memory Access
       DDR ECC Enabled
Dram Scrubbing starting (use XOR chanel 1)
       CS 0 Dram Scrubbing  0x1000000:0xffffffff
       CS 1 Dram Scrubbing  0x0:0xffffffff
       Total physical DRAM size = 8 GB


U-Boot variables that might be relevant:

CASset=min
MALLOC_len=5
MPmode=smp
amp_enable=no
autoload=no
cacheShare=no
console=console=ttyS0,115200
device_partition=0:1
disL2Cache=yes
disL2Prefetch=yes
disaMvPnp=no
eeeEnable=no
enaAutoRecovery=yes
enaClockGating=no
enaCpuStream=no
enaDCPref=yes
enaFPU=yes
enaICPref=yes
enaLPAE=yes
enaWrAllo=no

U-Boot version:

U-Boot 2011.12 (Dec 11 2013 - 10:25:52) Marvell version: v2011.12 2013_Q2.1
arm-marvell-linux-gnueabi-gcc (Linaro GCC branch-4.6.4. Marvell GCC
201301-1645.aee66e26) 4.6.4 20120731 (prerelease)
GNU ld (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26)
2.22.0.20120801

Used device tree is in attachment.

-- 
You are receiving this mail because:
You are the assignee for the bug.