Bluetooth on the Wandboard Quad

[Bernd Walter]

On Sat, Apr 11, 2015 at 05:06:32PM -0700, SvenB wrote:
> Hello,
> 
> Some additional information on this topic.
> 
> The IOGEAR Bluetooth 4.0 USB Micro Adapter GBU521W6, works fine when plugged
> into USB2 on amd64 both server and VM client, both 10.1. It doesn't work
> when plugged into USB3 on the server (10.1) or the Wandboard (11.0 current) 
> USB host connector (not sure if USB3, the plastic inside is blue).
> 
> Below is some information on the various setups.
> 
> Any advice on how to get it working on the Wandboard, or information on
> alternative bluetooth adapter that works with the Wandboard would be
> appreciated.
> 
> It's a Wandboard-Quad.
> 
> ================================================
> Wandboard
> 
> USB3? connector (not sure if it is 3, but the platic in the connector is
> blue)
> (the bluetooth adapter DOESN'T work in this setup):

The Wandboard is high speed USB only.
The carrier board is designed for super speed, but requires a different
CPU module.

-- 
B.Walter <bernd at bwct.de> http://www.bwct.de
Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.