Raspberry Pi composite video problem
Erich Dollansky
erichsfreebsdlist at alogt.com
Sat Nov 29 02:52:16 UTC 2014
Hi,
On Fri, 28 Nov 2014 21:45:09 -0500
Eric Gunther <egunther at warwick.net> wrote:
> On Sat, 2014-11-29 at 08:49 +0800, Erich Dollansky wrote:
>
> > On Fri, 28 Nov 2014 11:45:56 -0500
> > Eric Gunther <egunther at warwick.net> wrote:
> > .
> > >
> > > Eureka, I have logged in via ssh. Not sure what is different
> > > although the last few things I did where:
> > >
> > > rechecked /etc/inetd.conf, /etc/rc.conf, /etc/services
> > >
> > > service sshd enable
> > > service sshd reload
> > >
> > > And plugged in the client computer after the RPi had been
> > > connected to the ethernet, worked using IP.
> > >
> > sshd can run without inetd.
>
> Thanks for telling me. Funny thing, it stopped working afterward and
> cannot get it working again (ssh). Getting ssh working was, in a way,
> beside the point. I would like to figure out how to fix the display
> issue. If I had a working Ethernet connection to the Pi I could;
> Download the firmware and put it on, Adjust configuration files
> easier, and Report dmesg or similar message output to the list as
> needed.
>
just put this into your rc.conf:
inetd_enable="YES"
inetd_flags="-wW -a whateveraddress"
and this
ftp stream tcp nowait root /usr/libexec/ftpd ftpd -l
ftp stream tcp6 nowait root /usr/libexec/ftpd ftpd -l
ssh stream tcp nowait root /usr/sbin/sshd sshd -i -4
ssh stream tcp6 nowait root /usr/sbin/sshd sshd -i -6
telnet stream tcp nowait root /usr/libexec/telnetd telnetd
telnet stream tcp6 nowait root /usr/libexec/telnetd telnetd
into your inetd.conf.
If all other things fail, you should be able to transfer files via ftp
then.
> I emphasize that this is to more quickly and efficiently fix
> the display. I realize that you mentioned that you are not able to
> help with the composite video. So no thoughts on whether the
> firmware would help that problem? That is, text off the screen.
>
I have the B+ only. The 10.1 firmware should be able to handle the
older model without a problem.
Erich
More information about the freebsd-arm
mailing list